Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(9x2 + 4x) − 3x).

f(x) = √(9x2 + 4x) − 3xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 4x)/(3x²), with x in radians.

f(x) = (1 − cos 4x)/(3x²)x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = (−2x + 3)3. Find f′(2).

f(x) = (−2x + 3)3x = 2
f′(2) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = 2x2 − 4x − 4 at x = 2 crosses the y-axis at y = b. Find b.

f(x) = 2x2 − 4x − 4x = 2
b =
5.IntegralsMedium
xy14

Evaluate I = ∫14 3/x dx.

f(x) = 3/x[1, 4]
I =
6.IntegralsHard
xy−22

Find the area A of the region between the parabola y = 4 − x² and the x-axis.

y = 4 − x²
A =
7.Complex numbersMedium
ReIm11−1−122−2−233−3−3θz

The number z = 4·ej0.6 has its angle in radians. Find its real part a.

r = 4θ = 0.6 rad
a =
8.Complex numbersHard
ReIm11−1−122−2−2ABCD

Exactly one of the points A–D is a root of z³ = 8∠90°. Click it.

w = 8∠90°n = 3
  1. 1A (2∠90°)
  2. 2B (2∠30°)
  3. 3C (1∠30°)
  4. 4D (2∠0°)
9.Differential equationsMedium
tyy(0) = 2y(1.5) = ?

Solve y″ + 8y′ + 16y = 0 with y(0) = 2 and y′(0) = 1. Find y(1.5).

y″ + 8y′ + 16y = 0y(0) = 2y′(0) = 1
y(1.5) =
10.Differential equationsHard
xy13(1, 1)y(3) = ?

Solve the initial value problem y′ + 3y/x = 6 for x > 0, with y(1) = 1. Find y(3).

y′ + 3y/x = 6y(1) = 1
y(3) =
11.Matrices & determinantsMedium
A =5−1−50B =323−5

Let C = AB for the matrices shown. Find the entry c21 (row 2, column 1).

A = [5 −1; −5 0]B = [3 2; 3 −5]
c21 =
12.Matrices & determinantsHard
A =−6−53−2b =12−7

Solve the system −6x − 5y = 12 and 3x − 2y = −7. Find x.

−6x − 5y = 123x − 2y = −7
x =
13.Vectors: dot & cross productMedium
xyzdFAB

A constant force F = (15, −5, −25) N acts on an object while it moves in a straight line from point A(2, 4, −1) to point B(−5, 1, −1). Coordinates are in metres. Find the work W done by the force.

F = (15, −5, −25) NA(2, 4, −1) mB(−5, 1, −1) m
W = J
14.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (5, 0, 5) and b = (−5, −2, −3) and has a positive z-component. Find its x-component n̂x.

a = (5, 0, 5)b = (−5, −2, −3)n̂z > 0
n̂x =
15.ProbabilityMedium
red: 3blue: 3

A bag holds 3 red and 3 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?

3 / 3
P =
16.ProbabilityHard
n = 8, p = 0.3: P(X = 2) = ?k012345678

A test has 8 multiple-choice questions. A student who guesses gets each one right with probability 0.3, independently. What is the probability P of exactly 2 correct answers?

n = 8p = 0.3k = 2
P =
17.Descriptive statisticsMedium
253035404550

Find the sample standard deviation s of the data: 21, 54, 41, 21, 31.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 8. What proportion P of values is above 93.6?

μ = 100σ = 8x = 93.6
P =
19.Normal distributionMedium
−3−2−10123zshaded area between −z and z = 0.9488

Drag z so that the shaded area between −z and z under the standard normal curve is 0.9488. Find z to two decimals.

A = 0.9488
z =
20.Normal distributionHard
235240245250255260265gbottom 20%

The bag weights are normally distributed with mean 250 g and standard deviation 5 g. Drag the cut-off so the shaded bottom 20% is to the left of it. Find the cut-off x.

μ = 250 gσ = 5 g20%
x = g

3Solutions

1.Limits

Answer: L = 0.6667

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = 4x/(√(9x2 + 4x) + 3x)

Divide by x

f(x) = 4/(√(9 + 4/x) + 3)

Let x → ∞

L = 4/(3 + 3) = 0.6667

Answer

L = 0.6667
2.Limits

Answer: L = 2.667

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

4·sin 4x/(6x) → 0/0

Second application

16·cos 4x/6

Substitute x = 0

L = 16/6 = 2.667

Answer

L = 2.667
3.Derivatives

Answer: f′(2) = −6

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 3·(−2x + 3)2·(−2)

Substitute

f′(2) = 3·(−1)2·(−2) = −6

Answer

f′(2) = −6
4.Derivatives

Answer: b = −12

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = −4
f′(x) = 4x − 4 → f′(2) = 4

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = −4 − 4·2 = −12

Answer

b = −12
5.Integrals

Answer: I = 4.159

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 3·ln x

Evaluate at the limits

I = 3·(ln 4 − ln 1) = 3·ln 4 = 4.159

Answer

I = 4.159
6.Integrals

Answer: A = 10.67

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

4 − x² = 0 → x = ±2

Integrate

A = [4x − x³/3]−22 = 5.333 − (−5.333) = 10.67

Answer

A = 10.67
7.Complex numbers

Answer: a = 3.301

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Euler's formula

z = 4·(cos 0.6 + j sin 0.6)

Components (radians)

a = 4·cos 0.6 = 3.301
b = 4·sin 0.6 = 2.259
a = 3.301

Answer

a = 3.301
8.Complex numbers

Answer: B (2∠30°)

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus and arguments of the roots

|z| = 2
θ = 30°, 150°, −90°

The point

B = 2∠30°

Answer

B (2∠30°)
9.Differential equations

Answer: y(1.5) = 0.03842

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 4)² = 0 → r = −4

Constants

A = y(0) = 2
y′(0) = B − 4A → B = 1 + 8 = 9

Evaluate

y(1.5) = (2 + 9·1.5)·e−6 = 0.03842

Answer

y(1.5) = 0.03842
10.Differential equations

Answer: y(3) = 4.481

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫3/x dx = x3

Integrate

(x3y)′ = 6x3 → x3y = 6x4/4 + C

Initial condition

1 = 6/4 + C → C = −0.5

Evaluate

y(3) = (6·34/4 + (−0.5))/33 = 4.481

Answer

y(3) = 4.481
11.Matrices & determinants

Answer: c21 = −15

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c21 = (−5)·3 + 0·3 = −15

Answer

c21 = −15
12.Matrices & determinants

Answer: x = −2.185

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−6)·(−2) − (−5)·3 = 27

Replace the x column

det Aₓ = 12·(−2) − (−5)·(−7) = −59
x = −59/27 = −2.185

Answer

x = −2.185
y = 0.2222
13.Vectors: dot & cross product

Answer: W = −90 J

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Displacement

d = B − A = (−5, 1, −1) − (2, 4, −1) = (−7, −3, 0) m

Work

W = F·d = 15·(−7) + (−5)·(−3) + (−25)·0 = −90 J

Answer

W = −90 J

Negative work: the force acts mostly against the motion.

14.Vectors: dot & cross product

Answer: n̂x = −0.5774

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = 0·(−3) − 5·(−2) = 10
(a × b)y = azbx − axbz = 5·(−5) − 5·(−3) = −10
(a × b)z = axby − aybx = 5·(−2) − 0·(−5) = −10

Normalise

The z-component of a × b is negative, so use −(a × b).

|a × b| = √(10² + (−10)² + (−10)²) = 17.32
n̂ = −(10, −10, −10)/17.32 = (−0.5774, 0.5774, 0.5774)
n̂x = −0.5774

Answer

n̂x = −0.5774
15.Probability

Answer: P = 0.2

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

First and second draw

P = 3/6 · 2/5 = 6/30 = 0.2

Answer

P = 0.2
16.Probability

Answer: P = 0.2965

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 2) = 28·0.32·0.76 = 28·0.09·0.1176 = 0.2965

Answer

P = 0.2965
17.Descriptive statistics

Answer: s = 14.1

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 168/5 = 33.6

Squared deviations

Σ(x − x̄)² = (−12.6)² + 20.4² + 7.4² + (−12.6)² + (−2.6)² = 795.2

Standard deviation

s = √(795.2/4) = 14.1

Answer

s = 14.1
18.Descriptive statistics

Answer: P = 0.7881

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −0.8

Standard normal table

Φ(−0.8) = 0.2119
P = 1 − 0.2119 = 0.7881

Answer

P = 0.7881
19.Normal distribution

Answer: z = 1.95

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left of z

Φ(z) = (1 + 0.9488)/2 = 0.9744

Read the z-table backwards

Find 0.9744 inside the table and read off z.

z = 1.95

Answer

z = 1.95
20.Normal distribution

Answer: x = 245.8 g

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.2

z from the table

z ≈ −0.84

Back to the original units

x = 250 − 0.84·5 = 245.8 g

Answer

x = 245.8 g

ExamProblems · examproblems.com/courses/engineering-mathematics