Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(x2 − 3x) − x).

f(x) = √(x2 − 3x) − xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 2x)/(x²), with x in radians.

f(x) = (1 − cos 2x)/(x²)x → 0
L =
3.DerivativesMedium
xyx = −2

Let f(x) = ln(2x2 + 4). Find f′(−2).

f(x) = ln(2x2 + 4)x = −2
f′(−2) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = 2x2 + 4x + 1 at x = 2 crosses the y-axis at y = b. Find b.

f(x) = 2x2 + 4x + 1x = 2
b =
5.IntegralsMedium
xy16y = x ln x

Evaluate I = ∫₁6 x·ln x dx.

∫₁6 x ln x dx
I =
6.IntegralsHard
xy2y = x²eˣ

Evaluate I = ∫₀2 x²·eˣ dx.

∫₀2 x²eˣ dx
I =
7.Complex numbersMedium
ReIm11−1−122−2−233−3−344−4−455−5−566−6−677−7−788−8−8zABCD

The diagram shows z = −3 + j2. With w = 0.5∠−90°, click the point that represents z/w.

z = −3 + j2w = 0.5∠−90°
  1. 1A (4 + j6)
  2. 2B (−6 + j4)
  3. 3C (−2 − j3)
  4. 4D (−4 − j6)
8.Complex numbersHard
ReIm11−1−122−2−2z₁z₂

One root of z³ − 8z − 32 = 0 is z₁ = −2 + j2. The coefficients are real. Find the real root r.

z₁ = −2 + j2
r =
9.Differential equationsMedium
t (min)T (°C)12Ta​59 °C43 °C

A cup of coffee at 83 °C is left in a room at 20 °C. After 12 min its temperature is 59 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 43 °C?

T0 = 83 °CTa = 20 °CT(12) = 59 °CT = 43 °C
t = min
10.Differential equationsHard
tyK = 1ymax​ = ?

A system obeys y″ + 2y′ + 17y = 17 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.

y″ + 2y′ + 17y = 17y(0) = 0y′(0) = 0
ymax =
11.Matrices & determinantsMedium
A =2−4−4114541

Find the determinant det A of the 3×3 matrix A shown.

A = [2 −4 −4; 1 1 4; 5 4 1]
det A =
12.Matrices & determinantsHard
A =2−3−5−6b =611

Solve the system 2x − 3y = 6 and −5x − 6y = 11. Find x.

2x − 3y = 6−5x − 6y = 11
x =
13.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (−6, 5, −6) and b = (−4, −1, −2).

a = (−6, 5, −6)b = (−4, −1, −2)
a·b =
14.Vectors: dot & cross productHard
xyzABC

Find the area A of the triangle with corners A(0, 3, 1), B(2, 2, −1) and C(1, 0, 0). Coordinates are in metres.

A(0, 3, 1)B(2, 2, −1)C(1, 0, 0)
A = m²
15.ProbabilityMedium
n = 13k = 3N = ?

In how many ways N can a committee of 3 people be chosen from a group of 13? The order does not matter.

n = 13k = 3
N =
16.ProbabilityHard
n = 5, p = 0.6: P(X ≤ 1) = ?k012345

5 components are tested, and each one fails with probability 0.6, independently. What is the probability P that at most one fails?

n = 5p = 0.6
P =
17.Descriptive statisticsMedium
40455055

Find the sample standard deviation s of the data: 44, 42, 38, 58, 59, 46.

n = 6
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 8. What proportion P of values is below 96?

μ = 100σ = 8x = 96
P =
19.Normal distributionMedium
320 g321.7 gT = X₁ + … + X₈?

The masses of bolts are independent and normal with mean 40 g and standard deviation 1.2 g. Find the probability P that the total mass of 8 of them is below 321.7 g. Round z to two decimals.

μ = 40 gσ = 1.2 gn = 8< 321.7 g
P =
20.Normal distributionHard
0.04 mm0D − d?

Hole diameters D are normal with mean 25.04 mm and standard deviation 0.015 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.01 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.

hole: μ = 25.04 mm, σ = 0.015 mmshaft: μ = 25 mm, σ = 0.01 mm
P =

3Solutions

1.Limits

Answer: L = −1.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −3x/(√(x2 − 3x) + x)

Divide by x

f(x) = −3/(√(1 + (−3)/x) + 1)

Let x → ∞

L = −3/(1 + 1) = −1.5

Answer

L = −1.5
2.Limits

Answer: L = 2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

2·sin 2x/(2x) → 0/0

Second application

4·cos 2x/2

Substitute x = 0

L = 4/2 = 2

Answer

L = 2
3.Derivatives

Answer: f′(−2) = −0.6667

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule for the logarithm

f′(x) = 4x/(2x2 + 4)

Substitute

f′(−2) = −8/12 = −0.6667

Answer

f′(−2) = −0.6667
4.Derivatives

Answer: b = −7

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = 17
f′(x) = 4x + 4 → f′(2) = 12

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 17 − 12·2 = −7

Answer

b = −7
5.Integrals

Answer: I = 23.5

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(18·ln 6 − 9) − (0 − 0.25) = 23.5

Answer

I = 23.5
6.Integrals

Answer: I = 12.78

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

7.389·(2) − 1·2 = 12.78

Answer

I = 12.78
7.Complex numbers

Answer: D (−4 − j6)

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Effect of w

|z/w| = |z|/0.5, arg(z/w) = arg z − (−90)°

The point

z/w = −4 − j6 → D

Answer

D (−4 − j6)
8.Complex numbers

Answer: r = 4

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Conjugate pair

z₂ = −2 − j2
(z − z₁)(z − z₂) = z² − 2·(−2)·z + ((−2)² + 2²) = z² + 4z + 8

Factor out the quadratic

z³ − 8z − 32 = (z² + 4z + 8)(z − 4)

Real root

r = 4

Answer

r = 4

Check with the sum of the roots: z₁ + z₂ + r = −4 + 4 = 0 = −(0).

9.Differential equations

Answer: t = 25.21 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(63/39)/12 = 0.03996 min⁻¹

Time to reach the target

t = ln(63/23)/0.03996 = 25.21 min

Answer

t = 25.21 min
10.Differential equations

Answer: ymax = 1.456

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 1, r = −1 ± 4j

Constants from the initial values

y(0) = 1 + A = 0 → A = −1
y′(0) = −1A + 4B = 0 → B = −0.25

Peak

t = π/4 = 0.7854
ymax = 1·(1 + e−1·π/4) = 1.456

Answer

ymax = 1.456
11.Matrices & determinants

Answer: det A = −102

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −15, M₁₂ = −19, M₁₃ = −1

Cofactor expansion

det A = 2·(−15) − (−4)·(−19) + (−4)·(−1) = −102

Answer

det A = −102
12.Matrices & determinants

Answer: x = 0.1111

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = 2·(−6) − (−3)·(−5) = −27

Replace the x column

det Aₓ = 6·(−6) − (−3)·11 = −3
x = −3/(−27) = 0.1111

Answer

x = 0.1111
y = −1.926
13.Vectors: dot & cross product

Answer: a·b = 31

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = (−6)·(−4) + 5·(−1) + (−6)·(−2) = 24 + (−5) + 12 = 31

Answer

a·b = 31

Positive: the angle between the vectors is less than 90°.

14.Vectors: dot & cross product

Answer: A = 3.536 m²

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Edge vectors

AB = B − A = (2, −1, −2)
AC = C − A = (1, −3, −1)

Cross product

(AB × AC)x = AByACz − ABzACy = (−1)·(−1) − (−2)·(−3) = −5
(AB × AC)y = ABzACx − ABxACz = (−2)·1 − 2·(−1) = 0
(AB × AC)z = ABxACy − AByACx = 2·(−3) − (−1)·1 = −5
|AB × AC| = √((−5)² + 0² + (−5)²) = 7.071

Area of the triangle

A = ½·7.071 = 3.536 m²

Answer

A = 3.536 m²
15.Probability

Answer: N = 286

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(13, 3) = (13·12·11)/(3·2·1) = 286

Answer

N = 286
16.Probability

Answer: P = 0.08704

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.45 = 0.01024
P(X = 1) = 5·0.6·0.44 = 0.0768

Add them

P = 0.01024 + 0.0768 = 0.08704

Answer

P = 0.08704
17.Descriptive statistics

Answer: s = 8.681

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 287/6 = 47.83

Squared deviations

Σ(x − x̄)² = (−3.833)² + (−5.833)² + (−9.833)² + 10.17² + 11.17² + (−1.833)² = 376.8

Standard deviation

s = √(376.8/5) = 8.681

Answer

s = 8.681
18.Descriptive statistics

Answer: P = 0.3085

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −0.5

Standard normal table

Φ(−0.5) = 0.3085
P = 0.3085

Answer

P = 0.3085
19.Normal distribution

Answer: P = 0.6915

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the total

μT = 320 g, σT = 1.2·√8 = 3.394 g

Standardise

z = (321.7 − 320)/3.394 = 0.5

Probability

P = Φ(0.5) = 0.6915

Answer

P = 0.6915
20.Normal distribution

Answer: P = 0.9868

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the difference

μ = 25.04 − 25 = 0.04 mm, σ = 0.01803 mm

Standardise

z = (0 − 0.04)/0.01803 = −2.22

Probability

P = 1 − Φ(−2.22) = 0.9868

Answer

P = 0.9868

ExamProblems · examproblems.com/courses/engineering-mathematics