Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (1 + 3/x)x. Give a decimal value.

f(x) = (1 + 3/x)xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 2x)/(2x²), with x in radians.

f(x) = (1 − cos 2x)/(2x²)x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = (3x − 1)5. Find f′(1).

f(x) = (3x − 1)5x = 1
f′(1) =
4.DerivativesHard
xyx = 1

The tangent line to f(x) = −x2 − 3 at x = 1 crosses the y-axis at y = b. Find b.

f(x) = −x2 − 3x = 1
b =
5.IntegralsMedium
xyπy = x·sin x

Evaluate I = ∫₀π x·sin x dx (x in radians).

∫₀π x·sin x dx
I =
6.IntegralsHard
xyy = 2x2​y = 3x

Find the area A of the region enclosed by y = 2x2 and y = 3x.

y = 2x2y = 3x
A =
7.Complex numbersMedium
ReIm11−1−122−2−2θz

Write z = 3∠50° in rectangular form a + jb and give the real part a.

r = 3θ = 50°
a =
8.Complex numbersHard
ReIm22−2−244−4−4z₁z₂

One root of z³ − 11z² + 55z − 125 = 0 is z₁ = 3 + j4. The coefficients are real. Find the real root r.

z₁ = 3 + j4
r =
9.Differential equationsMedium
tyy(0) = 3y(2) = ?

Solve y″ + 6y′ + 9y = 0 with y(0) = 3 and y′(0) = 0. Find y(2).

y″ + 6y′ + 9y = 0y(0) = 3y′(0) = 0
y(2) =
10.Differential equationsHard
tyK = 10ymax​ = ?

A system obeys y″ + y′ + 9.25y = 92.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.

y″ + y′ + 9.25y = 92.5y(0) = 0y′(0) = 0
ymax =
11.Matrices & determinantsMedium
A =−42−13−5−20−51

Find the determinant det A of the 3×3 matrix A shown.

A = [−4 2 −1; 3 −5 −2; 0 −5 1]
det A =
12.Matrices & determinantsHard
A =23−16

Find the larger eigenvalue λ of the matrix A shown.

A = [2 3; −1 6]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (0, 6, −2) and b = (−2, −2, −4).

a = (0, 6, −2)b = (−2, −2, −4)
a·b =
14.Vectors: dot & cross productHard
xyzABC

Find the area A of the triangle with corners A(−2, −4, 1), B(−2, −2, 0) and C(4, 2, 4). Coordinates are in metres.

A(−2, −4, 1)B(−2, −2, 0)C(4, 2, 4)
A = m²
15.ProbabilityMedium
red: 4blue: 5

A bag holds 4 red and 5 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?

4 / 5
P =
16.ProbabilityHard
n = 11, p = 0.5: P(X = 2) = ?k01234567891011

A test has 11 multiple-choice questions. A student who guesses gets each one right with probability 0.5, independently. What is the probability P of exactly 2 correct answers?

n = 11p = 0.5k = 2
P =
17.Descriptive statisticsMedium
20253035404550

Find the sample standard deviation s of the data: 28, 45, 45, 54, 31, 42, 19.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 8. What proportion P of values is below 103.2?

μ = 100σ = 8x = 103.2
P =
19.Normal distributionMedium
−3−2−10123zshaded area between −z and z = 0.9164

Drag z so that the shaded area between −z and z under the standard normal curve is 0.9164. Find z to two decimals.

A = 0.9164
z =
20.Normal distributionHard
μ = 32x = ?80%

The delivery times are normally distributed with mean 32 min and standard deviation 6 min. Find the value x below which 80% of them lie (the 80th percentile).

μ = 32σ = 6P = 80%
x = min

3Solutions

1.Limits

Answer: L = 20.09

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Take the logarithm

ln L = limx→∞ x·ln(1 + 3/x)

Evaluate

ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.

ln L = 1·3 = 3

Undo the logarithm

L = e3 = 20.09

Answer

L = 20.09
2.Limits

Answer: L = 1

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

2·sin 2x/(4x) → 0/0

Second application

4·cos 2x/4

Substitute x = 0

L = 4/4 = 1

Answer

L = 1
3.Derivatives

Answer: f′(1) = 240

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 5·(3x − 1)4·3

Substitute

f′(1) = 5·24·3 = 240

Answer

f′(1) = 240
4.Derivatives

Answer: b = −2

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(1) = −4
f′(x) = −2x → f′(1) = −2

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = −4 − (−2)·1 = −2

Answer

b = −2
5.Integrals

Answer: I = 3.142

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−π·cos π + sin π) − (0 + 0) = 3.142

Answer

I = 3.142
6.Integrals

Answer: A = 1.125

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = 3x → x = 0, x = 1.5

Integrate upper minus lower

A = [1.5x2 − 0.6667x3]01.5 = 1.125

Answer

A = 1.125
7.Complex numbers

Answer: a = 1.928

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 3·cos(50°) = 1.928
b = 3·sin(50°) = 2.298

Rectangular form

z = 1.928 + j2.298
a = 1.928

Answer

a = 1.928
8.Complex numbers

Answer: r = 5

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Conjugate pair

z₂ = 3 − j4
(z − z₁)(z − z₂) = z² − 2·3·z + (3² + 4²) = z² − 6z + 25

Factor out the quadratic

z³ − 11z² + 55z − 125 = (z² − 6z + 25)(z − 5)

Real root

r = 5

Answer

r = 5

Check with the sum of the roots: z₁ + z₂ + r = 6 + 5 = 11 = −(−11).

9.Differential equations

Answer: y(2) = 0.05205

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 3)² = 0 → r = −3

Constants

A = y(0) = 3
y′(0) = B − 3A → B = 0 + 9 = 9

Evaluate

y(2) = (3 + 9·2)·e−6 = 0.05205

Answer

y(2) = 0.05205
10.Differential equations

Answer: ymax = 15.92

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 10, r = −0.5 ± 3j

Constants from the initial values

y(0) = 10 + A = 0 → A = −10
y′(0) = −0.5A + 3B = 0 → B = −1.667

Peak

t = π/3 = 1.047
ymax = 10·(1 + e−0.5·π/3) = 15.92

Answer

ymax = 15.92
11.Matrices & determinants

Answer: det A = 69

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −15, M₁₂ = 3, M₁₃ = −15

Cofactor expansion

det A = (−4)·(−15) − 2·3 + (−1)·(−15) = 69

Answer

det A = 69
12.Matrices & determinants

Answer: λ = 5

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (8)λ + (15) = 0

Solve

λ = (8 ± √(4))/2 → λ = 3, 5
λ = 5

Answer

λ = 5
13.Vectors: dot & cross product

Answer: a·b = −4

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = 0·(−2) + 6·(−2) + (−2)·(−4) = 0 + (−12) + 8 = −4

Answer

a·b = −4

Negative: the angle between the vectors is more than 90°.

14.Vectors: dot & cross product

Answer: A = 9 m²

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Edge vectors

AB = B − A = (0, 2, −1)
AC = C − A = (6, 6, 3)

Cross product

(AB × AC)x = AByACz − ABzACy = 2·3 − (−1)·6 = 12
(AB × AC)y = ABzACx − ABxACz = (−1)·6 − 0·3 = −6
(AB × AC)z = ABxACy − AByACx = 0·6 − 2·6 = −12
|AB × AC| = √(12² + (−6)² + (−12)²) = 18

Area of the triangle

A = ½·18 = 9 m²

Answer

A = 9 m²
15.Probability

Answer: P = 0.1667

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

First and second draw

P = 4/9 · 3/8 = 12/72 = 0.1667

Answer

P = 0.1667
16.Probability

Answer: P = 0.02686

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 2) = 55·0.52·0.59 = 55·0.25·0.001953 = 0.02686

Answer

P = 0.02686
17.Descriptive statistics

Answer: s = 12.11

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 264/7 = 37.71

Squared deviations

Σ(x − x̄)² = (−9.714)² + 7.286² + 7.286² + 16.29² + (−6.714)² + 4.286² + (−18.71)² = 879.4

Standard deviation

s = √(879.4/6) = 12.11

Answer

s = 12.11
18.Descriptive statistics

Answer: P = 0.6554

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 0.4

Standard normal table

Φ(0.4) = 0.6554
P = 0.6554

Answer

P = 0.6554
19.Normal distribution

Answer: z = 1.73

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left of z

Φ(z) = (1 + 0.9164)/2 = 0.9582

Read the z-table backwards

Find 0.9582 inside the table and read off z.

z = 1.73

Answer

z = 1.73
20.Normal distribution

Answer: x = 37.05 min

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.8 → z = 0.8416

Back to x

x = 32 + 0.8416·6 = 37.05 min

Answer

x = 37.05 min

ExamProblems · examproblems.com/courses/engineering-mathematics