Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (1 + 1/x)x. Give a decimal value.
f(x) = (1 + 1/x)xx → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (1 − cos 2x)/(x²), with x in radians.
f(x) = (1 − cos 2x)/(x²)x → 0
L =
3.DerivativesMedium
Let f(x) = (4x + 5)4. Find f′(2).
f(x) = (4x + 5)4x = 2
f′(2) =
4.DerivativesHard
Let f(x) = x3 − 9x2 + 15x + 4. Find the x-coordinate x of the local minimum.
f(x) = x3 − 9x2 + 15x + 4
x =
5.IntegralsMedium
The region under y = x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).
y = x0 ≤ x ≤ 2
V =
6.IntegralsHard
Find the area A of the region enclosed by y = x2 and y = 4x.
y = x2y = 4x
A =
7.Complex numbersMedium
Given z₁ = 1.5∠100° and z₂ = 0.5∠−95°, find the real part of w = z₁/z₂.
z₁ = 1.5∠100°z₂ = 0.5∠−95°
Re(w) =
8.Complex numbersHard
Solve z² − 6z + 11.25 = 0. The roots are a ± jb; find b > 0.
p = −6q = 11.25
b =
9.Differential equationsMedium
A forged steel part at 360 °C is left to cool in a workshop at 23 °C. After 21 min its temperature is 202 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 86 °C?
T0 = 360 °CTa = 23 °CT(21) = 202 °CT = 86 °C
t = min
10.Differential equationsHard
A tank holds 500 L of water in which 5 kg of salt is dissolved. Brine with 0.05 kg of salt per litre flows in at 10 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 13 kg of salt?
V = 500 Lm0 = 5 kgc = 0.05 kg/Lr = 10 L/min
t = min
11.Matrices & determinantsMedium
Find the determinant det A of the 3×3 matrix A shown.
A = [2 0 2; 0 3 −5; −5 3 0]
det A =
12.Matrices & determinantsHard
Solve the system −x + y = 2 and 2x + 2y = −12. Find x.
−x + y = 22x + 2y = −12
x =
13.Vectors: dot & cross productMedium
A constant force F = (−15, 30, 30) N acts on an object while it moves in a straight line from point A(−5, 3, −4) to point B(2, 5, 5). Coordinates are in metres. Find the work W done by the force.
F = (−15, 30, 30) NA(−5, 3, −4) mB(2, 5, 5) m
W = J
14.Vectors: dot & cross productHard
Find the volume V of the parallelepiped whose edges from one corner are a = (−5, −5, 1), b = (−5, −4, −2) and c = (0, 4, −3).
a = (−5, −5, 1)b = (−5, −4, −2)c = (0, 4, −3)
V =
15.ProbabilityMedium
For the distribution shown, find the variance Var(X) of X.
x: 10, 20, 30, 40p(x): 0.35, 0.3, 0.3, 0.05
Var(X) =
16.ProbabilityHard
X has the distribution shown, and Y = 3X + 5. Find the standard deviation σY of Y.
x: 0, 1, 2, 3p(x): 0.1, 0.2, 0.35, 0.35Y = 3X + 5
σY =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 10, 38, 53, 26, 51, 53.
n = 6
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 170 and standard deviation 8. What proportion P of values is above 186?
μ = 170σ = 8x = 186
P =
19.Normal distributionMedium
The bag weights are normally distributed with mean 250 g and standard deviation 5 g. What fraction lies between 246.25 and 255.25 g? Give P as a decimal.
μ = 250σ = 5x1 = 246.25x2 = 255.25
P =
20.Normal distributionHard
The delivery times are normally distributed with mean 32 min and standard deviation 6 min. Find the value x below which 20% of them lie (the 20th percentile).
μ = 32σ = 6P = 20%
x = min
3Solutions
1.Limits
Answer: L = 2.718
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Take the logarithm
ln L = limx→∞ x·ln(1 + 1/x)
Evaluate
ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.
ln L = 1·1 = 1
Undo the logarithm
L = e1 = 2.718
Answer
L = 2.718
2.Limits
Answer: L = 2
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
2·sin 2x/(2x) → 0/0
Second application
4·cos 2x/2
Substitute x = 0
L = 4/2 = 2
Answer
L = 2
3.Derivatives
Answer: f′(2) = 35152
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule
f′(x) = 4·(4x + 5)3·4
Substitute
f′(2) = 4·133·4 = 35152
Answer
f′(2) = 35152
4.Derivatives
Answer: x = 5
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 − 18x + 15 = 3·(x2 − 6x + 5)
Solve f′(x) = 0
x = 1 or x = 5
Which one is which
f″(x) = 6x − 18: negative at a maximum, positive at a minimum.
f″(1) = −12, f″(5) = 12
x = 5
Answer
x = 5
5.Integrals
Answer: V = 8.378
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀2 1x² dx
Integrate
V = π·1·2³/3 = 8.378
Answer
V = 8.378
Check: a cone of radius 2 and height 2 has (1/3)πr²h = 8.378.
6.Integrals
Answer: A = 10.67
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Intersection points
x2 = 4x → x = 0, x = 4
Integrate upper minus lower
A = [2x2 − 0.3333x3]04 = 10.67
Answer
A = 10.67
7.Complex numbers
Answer: Re(w) = −2.898
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Modulus and argument of w
|w| = 1.5 / 0.5 = 3
θ = 100° − (−95)° = 195° → −165°
Rectangular form
Re(w) = 3·cos(−165°) = −2.898
Im(w) = 3·sin(−165°) = −0.7765
Re(w) = −2.898
Answer
Re(w) = −2.898
8.Complex numbers
Answer: b = 1.5
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Discriminant
p² − 4q = 36 − 45 = −9 < 0
Quadratic formula
z = (6 ± j√9)/2 = 3 + j1.5, 3 − j1.5
Answer
b = 1.5
Answer
b = 1.5
9.Differential equations
Answer: t = 55.66 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Cooling constant
k = ln(337/179)/21 = 0.03013 min⁻¹
Time to reach the target
t = ln(337/63)/0.03013 = 55.66 min
Answer
t = 55.66 min
10.Differential equations
Answer: t = 25.54 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Result
m(t) = 25 + (−20)·e−t/50
Solve for t
e−t/50 = (25 − 13)/(25 − 5) = 0.6
t = 50·ln(1.667) = 25.54 min
Answer
t = 25.54 min
11.Matrices & determinants
Answer: det A = 60
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
2×2 minors of the first row
M₁₁ = 15, M₁₂ = −25, M₁₃ = 15
Cofactor expansion
det A = 2·15 − 0·(−25) + 2·15 = 60
Answer
det A = 60
12.Matrices & determinants
Answer: x = −4
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = (−1)·2 − 1·2 = −4
Replace the x column
det Aₓ = 2·2 − 1·(−12) = 16
x = 16/(−4) = −4
Answer
x = −4
y = −2
13.Vectors: dot & cross product
Answer: W = 225 J
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Displacement
d = B − A = (2, 5, 5) − (−5, 3, −4) = (7, 2, 9) m
Work
W = F·d = (−15)·7 + 30·2 + 30·9 = 225 J
Answer
W = 225 J
14.Vectors: dot & cross product
Answer: V = 45
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Cross product b × c
(b × c)x = bycz − bzcy = (−4)·(−3) − (−2)·4 = 20
(b × c)y = bzcx − bxcz = (−2)·0 − (−5)·(−3) = −15
(b × c)z = bxcy − bycx = (−5)·4 − (−4)·0 = −20
Dot product with a
a·(b × c) = (−5)·20 + (−5)·(−15) + 1·(−20) = −45
V = |−45| = 45
Answer
V = 45
15.Probability
Answer: Var(X) = 84.75
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Spread of X
μ = 1.95, Var(X) = 0.9475, σX = 0.9734
Linear change
σY = |3|·0.9734 = 2.92
Answer
σY = 2.92
The mean does move: E(Y) = 3·1.95 + 5 = 10.85.
17.Descriptive statistics
Answer: s = 17.58
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 2
Standard normal table
Φ(2) = 0.9772
P = 1 − 0.9772 = 0.02275
Answer
P = 0.02275
19.Normal distribution
Answer: P = 0.6265
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
z-scores
z₁ = (246.25 − 250)/5 = −0.75
z₂ = (255.25 − 250)/5 = 1.05
Area between
P = Φ(1.05) − Φ(−0.75) = 0.8531 − 0.2266 = 0.6265
Answer
P = 0.6265
20.Normal distribution
Answer: x = 26.95 min
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.