Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (−2x2 + 3x + 9)/(x2 + 4x + 8).
f(x) = (−2x2 + 3x + 9)/(x2 + 4x + 8)x → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (e1.5x − 1 − 1.5x)/x².
f(x) = (e1.5x − 1 − 1.5x)/x²x → 0
L =
3.DerivativesMedium
Let f(x) = x·sin(3x), with x in radians. Find f′(1.5).
f(x) = x·sin(3x)x = 1.5 rad
f′(1.5) =
4.DerivativesHard
The tangent line to f(x) = 3x2 + 1 at x = 2 crosses the y-axis at y = b. Find b.
f(x) = 3x2 + 1x = 2
b =
5.IntegralsMedium
The region under y = 3x from x = 0 to x = 4 is rotated about the x-axis. Find the volume V of the solid (a cone).
y = 3x0 ≤ x ≤ 4
V =
6.IntegralsHard
Find the area A of the region enclosed by y = 2x2 and y = 2x.
y = 2x2y = 2x
A =
7.Complex numbersMedium
Write z = 7 + j5 in exponential form r·ejθ. Give θ in radians, between −π and π.
z = 7 + j5
θ = rad
8.Complex numbersHard
One root of z³ − 7z² + 19z − 13 = 0 is z₁ = 3 + j2. The coefficients are real. Find the real root r.
z₁ = 3 + j2
r =
9.Differential equationsMedium
Solve y″ + 6y′ + 5y = 0 with y(0) = 5 and y′(0) = 1. Find y(1).
y″ + 6y′ + 5y = 0y(0) = 5y′(0) = 1
y(1) =
10.Differential equationsHard
Solve y″ + 4y′ + 20y = 0 with y(0) = 2 and y′(0) = 0 (released from rest). Find y(1.5); angles in radians.
y″ + 4y′ + 20y = 0y(0) = 2y′(0) = 0
y(1.5) =
11.Matrices & determinantsMedium
Find the determinant det A of the 3×3 matrix A shown.
A = [−1 4 −3; 3 −3 −5; −2 −2 2]
det A =
12.Matrices & determinantsHard
Find the larger eigenvalue λ of the matrix A shown.
A = [−2 −3; −1 0]
λ =
13.Vectors: dot & cross productMedium
A constant force F = (−5, −30, −20) N acts on an object while it moves in a straight line from point A(−2, 1, 0) to point B(−3, 4, −3). Coordinates are in metres. Find the work W done by the force.
F = (−5, −30, −20) NA(−2, 1, 0) mB(−3, 4, −3) m
W = J
14.Vectors: dot & cross productHard
Find the volume V of the parallelepiped whose edges from one corner are a = (1, −3, 3), b = (4, −3, 4) and c = (4, 1, −1).
a = (1, −3, 3)b = (4, −3, 4)c = (4, 1, −1)
V =
15.ProbabilityMedium
In how many ways N can a committee of 2 people be chosen from a group of 6? The order does not matter.
n = 6k = 2
N =
16.ProbabilityHard
X has the distribution shown, and Y = 2X + 5. Find the standard deviation σY of Y.
x: 0, 2, 4, 6p(x): 0.25, 0.25, 0.3, 0.2Y = 2X + 5
σY =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 11, 51, 12, 31, 50, 42, 46.
n = 7
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 50 and standard deviation 12. What proportion P of values is below 68?
μ = 50σ = 12x = 68
P =
19.Normal distributionMedium
The delivery times are normally distributed with mean 32 min and standard deviation 6 min. What fraction lies between 22.4 and 33.5 min? Give P as a decimal.
μ = 32σ = 6x1 = 22.4x2 = 33.5
P =
20.Normal distributionHard
Hole diameters D are normal with mean 25.05 mm and standard deviation 0.02 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.01 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
hole: μ = 25.05 mm, σ = 0.02 mmshaft: μ = 25 mm, σ = 0.01 mm
P =
3Solutions
1.Limits
Answer: L = −2
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Divide by the highest power
(−2 + 3/x + 9/x2)/(1 + 4/x + 8/x2)
Let x → ∞
L = −2/1 = −2
Answer
L = −2
For equal degrees the limit is the ratio of the leading coefficients.
2.Limits
Answer: L = 1.125
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
(1.5·e1.5x − 1.5)/(2x) → 0/0
Second application
2.25·e1.5x/2
Substitute x = 0
L = 2.25·1/2 = 1.125
Answer
L = 1.125
3.Derivatives
Answer: f′(1.5) = −1.926
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Product and chain rule
f′(x) = sin(3x) + 3x·cos(3x)
Substitute
f′(1.5) = −0.9775 + 4.5·(−0.2108) = −1.926
Answer
f′(1.5) = −1.926
4.Derivatives
Answer: b = −11
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Point and slope
f(2) = 13
f′(x) = 6x → f′(2) = 12
Tangent line at x = 0
b = f(x₀) − f′(x₀)·x₀ = 13 − 12·2 = −11
Answer
b = −11
5.Integrals
Answer: V = 603.2
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀4 9x² dx
Integrate
V = π·9·4³/3 = 603.2
Answer
V = 603.2
Check: a cone of radius 12 and height 4 has (1/3)πr²h = 603.2.
6.Integrals
Answer: A = 0.3333
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Intersection points
2x2 = 2x → x = 0, x = 1
Integrate upper minus lower
A = [x2 − 0.6667x3]01 = 0.3333
Answer
A = 0.3333
7.Complex numbers
Answer: θ = 0.6202 rad
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Modulus
r = √(49 + 25) = 8.602
Argument in radians
θ = 35.54° = 35.54·π/180 = 0.6202 rad
Exponential form
z = 8.602·ej0.6202
Answer
θ = 0.6202 rad
8.Complex numbers
Answer: r = 1
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Check with the sum of the roots: z₁ + z₂ + r = 6 + 1 = 7 = −(−7).
9.Differential equations
Answer: y(1) = 2.381
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Characteristic roots
(r + 1)(r + 5) = 0 → r = −1, −5
Constants from the initial values
A + B = 5, −1A − 5B = 1
A = 6.5, B = −1.5
Evaluate
y(1) = 6.5·e−1 + (−1.5)·e−5 = 2.381
Answer
y(1) = 2.381
10.Differential equations
Answer: y(1.5) = 0.0817
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Complex roots
r = −2 ± 4j
Constants
A = 2, B = 2·2/4 = 1
Evaluate
y(1.5) = e−3(2·cos 6 + 1·sin 6) = 0.0817
Answer
y(1.5) = 0.0817
11.Matrices & determinants
Answer: det A = 68
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
2×2 minors of the first row
M₁₁ = −16, M₁₂ = −4, M₁₃ = −12
Cofactor expansion
det A = (−1)·(−16) − 4·(−4) + (−3)·(−12) = 68
Answer
det A = 68
12.Matrices & determinants
Answer: λ = 1
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Characteristic equation
λ² − (−2)λ + (−3) = 0
Solve
λ = (−2 ± √(16))/2 → λ = −3, 1
λ = 1
Answer
λ = 1
13.Vectors: dot & cross product
Answer: W = −25 J
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Displacement
d = B − A = (−3, 4, −3) − (−2, 1, 0) = (−1, 3, −3) m
Negative work: the force acts mostly against the motion.
14.Vectors: dot & cross product
Answer: V = 13
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Cross product b × c
(b × c)x = bycz − bzcy = (−3)·(−1) − 4·1 = −1
(b × c)y = bzcx − bxcz = 4·4 − 4·(−1) = 20
(b × c)z = bxcy − bycx = 4·1 − (−3)·4 = 16
Dot product with a
a·(b × c) = 1·(−1) + (−3)·20 + 3·16 = −13
V = |−13| = 13
Answer
V = 13
15.Probability
Answer: N = 15
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Combinations
C(6, 2) = (6·5)/(2·1) = 15
Answer
N = 15
16.Probability
Answer: σY = 4.285
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Spread of X
μ = 2.9, Var(X) = 4.59, σX = 2.142
Linear change
σY = |2|·2.142 = 4.285
Answer
σY = 4.285
The mean does move: E(Y) = 2·2.9 + 5 = 10.8.
17.Descriptive statistics
Answer: s = 17.18
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 1.5
Standard normal table
Φ(1.5) = 0.9332
P = 0.9332
Answer
P = 0.9332
19.Normal distribution
Answer: P = 0.5439
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
z-scores
z₁ = (22.4 − 32)/6 = −1.6
z₂ = (33.5 − 32)/6 = 0.25
Area between
P = Φ(0.25) − Φ(−1.6) = 0.5987 − 0.0548 = 0.5439
Answer
P = 0.5439
20.Normal distribution
Answer: P = 0.9875
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).