Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (1 + 2/x)3x. Give a decimal value.

f(x) = (1 + 2/x)3xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e0.5x − 1 − 0.5x)/x².

f(x) = (e0.5x − 1 − 0.5x)/x²x → 0
L =
3.DerivativesMedium
xyx = 0.5

Let f(x) = x·sin(2x), with x in radians. Find f′(0.5).

f(x) = x·sin(2x)x = 0.5 rad
f′(0.5) =
4.DerivativesHard
xy

Let f(x) = x3 − 1.5x2 − 6x − 6. Find the x-coordinate x of the local minimum.

f(x) = x3 − 1.5x2 − 6x − 6
x =
5.IntegralsMedium
xy02

Evaluate I = ∫02 e−x dx.

f(x) = e−x[0, 2]
I =
6.IntegralsHard
xy−22

Find the area A of the region between the parabola y = 4 − x² and the x-axis.

y = 4 − x²
A =
7.Complex numbersMedium
ReIm22−2−244−4−466−6−6θz

Write z = 2 + j6 in exponential form r·ejθ. Give θ in radians, between −π and π.

z = 2 + j6
θ = rad
8.Complex numbersHard
ReIm11−1−122−2−2z₁z₂

One root of z³ + 3z² + 4z − 8 = 0 is z₁ = −2 + j2. The coefficients are real. Find the real root r.

z₁ = −2 + j2
r =
9.Differential equationsMedium
t (min)T (°C)56Ta​T = ?

A forged steel part at 500 °C is left to cool in a workshop at 20 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.04 min⁻¹, find its temperature T after 56 min.

T0 = 500 °CTa = 20 °Ck = 0.04 min⁻¹t = 56 min
T = °C
10.Differential equationsHard
ty1y(1) = ?

Solve y′ + y = 7e−2t with y(0) = 1. Find y(1).

y′ + y = 7e−2ty(0) = 1
y(1) =
11.Matrices & determinantsMedium
A =114−5−3−5−414

Find the determinant det A of the 3×3 matrix A shown.

A = [1 1 4; −5 −3 −5; −4 1 4]
det A =
12.Matrices & determinantsHard
A =−12−78

Find the larger eigenvalue λ of the matrix A shown.

A = [−1 2; −7 8]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (2, −2, 3) and b = (−1, k, 1) are perpendicular.

a = (2, −2, 3)b = (−1, k, 1)
k =
14.Vectors: dot & cross productHard
xyzabc

Find the volume V of the parallelepiped whose edges from one corner are a = (−3, −3, −5), b = (−1, 1, 3) and c = (−5, −5, 5).

a = (−3, −3, −5)b = (−1, 1, 3)c = (−5, −5, 5)
V =
15.ProbabilityMedium
xp(x)00.320.140.3560.25μ = 3.1

For the distribution shown, find the standard deviation σ of X.

x: 0, 2, 4, 6p(x): 0.3, 0.1, 0.35, 0.25
σ =
16.ProbabilityHard
n = 7, p = 0.6: P(X = 5) = ?k01234567

A test has 7 multiple-choice questions. A student who guesses gets each one right with probability 0.6, independently. What is the probability P of exactly 5 correct answers?

n = 7p = 0.6k = 5
P =
17.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 38, 58, 18, 39, 15.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 100 and standard deviation 8. Find the z-score z of a score of 104.8.

μ = 100σ = 8x = 104.8
z =
19.Normal distributionMedium
76118P = ?

The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. What fraction lies between 76 and 118 points? Give P as a decimal.

μ = 100σ = 15x1 = 76x2 = 118
P =
20.Normal distributionHard
μ = 178x = ?25%

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. Find the value x below which 25% of them lie (the 25th percentile).

μ = 178σ = 7P = 25%
x = cm

3Solutions

1.Limits

Answer: L = 403.4

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Take the logarithm

ln L = limx→∞ 3·x·ln(1 + 2/x)

Evaluate

ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.

ln L = 3·2 = 6

Undo the logarithm

L = e6 = 403.4

Answer

L = 403.4
2.Limits

Answer: L = 0.125

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(0.5·e0.5x − 0.5)/(2x) → 0/0

Second application

0.25·e0.5x/2

Substitute x = 0

L = 0.25·1/2 = 0.125

Answer

L = 0.125
3.Derivatives

Answer: f′(0.5) = 1.382

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product and chain rule

f′(x) = sin(2x) + 2x·cos(2x)

Substitute

f′(0.5) = 0.8415 + 1·0.5403 = 1.382

Answer

f′(0.5) = 1.382
4.Derivatives

Answer: x = 2

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 − 3x − 6 = 3·(x2 − x − 2)

Solve f′(x) = 0

x = −1 or x = 2

Which one is which

f″(x) = 6x − 3: negative at a maximum, positive at a minimum.

f″(−1) = −9, f″(2) = 9
x = 2

Answer

x = 2
5.Integrals

Answer: I = 0.8647

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−x/(−1)

Evaluate at the limits

I = (e−2 − 1)/(−1) = (0.1353 − 1)/(−1) = 0.8647

Answer

I = 0.8647
6.Integrals

Answer: A = 10.67

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

4 − x² = 0 → x = ±2

Integrate

A = [4x − x³/3]−22 = 5.333 − (−5.333) = 10.67

Answer

A = 10.67
7.Complex numbers

Answer: θ = 1.249 rad

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus

r = √(4 + 36) = 6.325

Argument in radians

θ = 71.57° = 71.57·π/180 = 1.249 rad

Exponential form

z = 6.325·ej1.249

Answer

θ = 1.249 rad
8.Complex numbers

Answer: r = 1

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Conjugate pair

z₂ = −2 − j2
(z − z₁)(z − z₂) = z² − 2·(−2)·z + ((−2)² + 2²) = z² + 4z + 8

Factor out the quadratic

z³ + 3z² + 4z − 8 = (z² + 4z + 8)(z − 1)

Real root

r = 1

Answer

r = 1

Check with the sum of the roots: z₁ + z₂ + r = −4 + 1 = −3 = −(3).

9.Differential equations

Answer: T = 71.1 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 20 + 480·e−0.04t

Substitute t

T(56) = 20 + 480·0.1065 = 71.1 °C

Answer

T = 71.1 °C
10.Differential equations

Answer: y(1) = 1.996

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = et
(ety)′ = 7e−t

General solution

y = 7/(−1)·e−2t + C·e−t = −7·e−2t + C·e−t

Initial condition

1 = −7 + C → C = 8

Evaluate

y(1) = −7·0.1353 + 8·0.3679 = 1.996

Answer

y(1) = 1.996
11.Matrices & determinants

Answer: det A = −35

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −7, M₁₂ = −40, M₁₃ = −17

Cofactor expansion

det A = 1·(−7) − 1·(−40) + 4·(−17) = −35

Answer

det A = −35
12.Matrices & determinants

Answer: λ = 6

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (7)λ + (6) = 0

Solve

λ = (7 ± √(25))/2 → λ = 1, 6
λ = 6

Answer

λ = 6
13.Vectors: dot & cross product

Answer: k = 0.5

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = 2·(−1) + (−2)·k + 3·1 = 0
1 + (−2)·k = 0

Solve for k

k = −1/(−2) = 0.5

Answer

k = 0.5
14.Vectors: dot & cross product

Answer: V = 80

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product b × c

(b × c)x = bycz − bzcy = 1·5 − 3·(−5) = 20
(b × c)y = bzcx − bxcz = 3·(−5) − (−1)·5 = −10
(b × c)z = bxcy − bycx = (−1)·(−5) − 1·(−5) = 10

Dot product with a

a·(b × c) = (−3)·20 + (−3)·(−10) + (−5)·10 = −80
V = |−80| = 80

Answer

V = 80
15.Probability

Answer: σ = 2.322

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.3 + 2·0.1 + 4·0.35 + 6·0.25 = 3.1

Mean of the squares

E(X²) = 0·0.3 + 4·0.1 + 16·0.35 + 36·0.25 = 15

Variance

Var(X) = 15 − 3.1² = 5.39
σ = √5.39 = 2.322

Answer

σ = 2.322
16.Probability

Answer: P = 0.2613

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 5) = 21·0.65·0.42 = 21·0.07776·0.16 = 0.2613

Answer

P = 0.2613
17.Descriptive statistics

Answer: s = 17.56

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 168/5 = 33.6

Squared deviations

Σ(x − x̄)² = 4.4² + 24.4² + (−15.6)² + 5.4² + (−18.6)² = 1233

Standard deviation

s = √(1233/4) = 17.56

Answer

s = 17.56
18.Descriptive statistics

Answer: z = 0.6

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (104.8 − 100)/8 = 0.6

Answer

z = 0.6
19.Normal distribution

Answer: P = 0.8301

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (76 − 100)/15 = −1.6
z₂ = (118 − 100)/15 = 1.2

Area between

P = Φ(1.2) − Φ(−1.6) = 0.8849 − 0.0548 = 0.8301

Answer

P = 0.8301
20.Normal distribution

Answer: x = 173.3 cm

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.25 → z = −0.6745

Back to x

x = 178 + −0.6745·7 = 173.28 cm

Answer

x = 173.28 cm

ExamProblems · examproblems.com/courses/engineering-mathematics