Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(x2 − 5x) − x).

f(x) = √(x2 − 5x) − xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 5x)/(3x²), with x in radians.

f(x) = (1 − cos 5x)/(3x²)x → 0
L =
3.DerivativesMedium
xyx = −1

Let f(x) = (4x − 1)3. Find f′(−1).

f(x) = (4x − 1)3x = −1
f′(−1) =
4.DerivativesHard
xy

Let f(x) = x3 + 7.5x2 + 18x − 4. Find the x-coordinate x of the local minimum.

f(x) = x3 + 7.5x2 + 18x − 4
x =
5.IntegralsMedium
xy3y = √(2x)

The region under y = √(2x) from x = 0 to x = 3 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).

y = √(2x)0 ≤ x ≤ 3
V =
6.IntegralsHard
xy4y = 4xy = x²

The region between the line y = 4x and the parabola y = x² is rotated about the x-axis. Find the volume V of the solid.

y = 4xy = x²
V =
7.Complex numbersMedium
ReIm55−5−51010−10−10z₁z₂w

Given z₁ = 4∠100° and z₂ = 3∠65°, find the imaginary part of w = z₁·z₂.

z₁ = 4∠100°z₂ = 3∠65°
Im(w) =
8.Complex numbersHard
ReIm11−1−122−2−2θz

Use De Moivre's theorem to find the real part of z⁶ for z = 1 + j√3.

z = 1 + j√3n = 6
Re(z⁶) =
9.Differential equationsMedium
t (min)T (°C)40Ta​182 °C

A forged steel part at 380 °C is left to cool in a workshop at 21 °C. After 40 min its temperature is 182 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 380 °CTa = 21 °CT(40) = 182 °C
k = min⁻¹
10.Differential equationsHard
ty1.5y(1.5) = ?

Solve y′ + 2y = 3e−t with y(0) = 2. Find y(1.5).

y′ + 2y = 3e−ty(0) = 2
y(1.5) =
11.Matrices & determinantsMedium
A =−321−140−2−5−5

Find the determinant det A of the 3×3 matrix A shown.

A = [−3 2 1; −1 4 0; −2 −5 −5]
det A =
12.Matrices & determinantsHard
A =−36−58

Find the larger eigenvalue λ of the matrix A shown.

A = [−3 6; −5 8]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the scalar projection compb a of a = (7, 5, 3) onto b = (−4, −5, 1), that is, the component of a in the direction of b.

a = (7, 5, 3)b = (−4, −5, 1)
compb a =
14.Vectors: dot & cross productHard
xyzab

Find the area A of the parallelogram spanned by a = (3, 5, −3) and b = (−1, 0, −6).

a = (3, 5, −3)b = (−1, 0, −6)
A =
15.ProbabilityMedium
xp(x)00.1520.3540.260.3μ = 3.3

For the distribution shown, find the variance Var(X) of X.

x: 0, 2, 4, 6p(x): 0.15, 0.35, 0.2, 0.3
Var(X) =
16.ProbabilityHard
n = 11, p = 0.25: P(X ≤ 1) = ?k01234567891011

11 components are tested, and each one fails with probability 0.25, independently. What is the probability P that at most one fails?

n = 11p = 0.25
P =
17.Descriptive statisticsMedium
15202530354045

Find the sample standard deviation s of the data: 36, 33, 46, 25, 46, 12, 49.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 500 and standard deviation 40. What proportion P of values is below 560?

μ = 500σ = 40x = 560
P =
19.Normal distributionMedium
750 g742.1 gX + Y?

X is normal with mean 250 g and standard deviation 4 g; Y is independent and normal with mean 500 g and standard deviation 9 g. Find the probability P that X + Y is more than 742.1 g. Round z to two decimals.

μX = 250, σX = 4μY = 500, σY = 9X + Y > 742.1 g
P =
20.Normal distributionHard
157164171178185192199cmbottom 95%

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. Drag the cut-off so the shaded bottom 95% is to the left of it. Find the cut-off x.

μ = 178 cmσ = 7 cm95%
x = cm

3Solutions

1.Limits

Answer: L = −2.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −5x/(√(x2 − 5x) + x)

Divide by x

f(x) = −5/(√(1 + (−5)/x) + 1)

Let x → ∞

L = −5/(1 + 1) = −2.5

Answer

L = −2.5
2.Limits

Answer: L = 4.167

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

5·sin 5x/(6x) → 0/0

Second application

25·cos 5x/6

Substitute x = 0

L = 25/6 = 4.167

Answer

L = 4.167
3.Derivatives

Answer: f′(−1) = 300

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 3·(4x − 1)2·4

Substitute

f′(−1) = 3·(−5)2·4 = 300

Answer

f′(−1) = 300
4.Derivatives

Answer: x = −2

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 + 15x + 18 = 3·(x2 + 5x + 6)

Solve f′(x) = 0

x = −3 or x = −2

Which one is which

f″(x) = 6x + 15: negative at a maximum, positive at a minimum.

f″(−3) = −3, f″(−2) = 3
x = −2

Answer

x = −2
5.Integrals

Answer: V = 28.27

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀3 2x dx

Integrate

V = π·2·3²/2 = 28.27

Answer

V = 28.27
6.Integrals

Answer: V = 428.9

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

4x = 1x² → x = 0, x = 4

Washer method

V = π∫₀4 ((4x)² − (1x²)²) dx

Integrate

V = π(16·4³/3 − 1·4⁵/5) = π·136.5 = 428.9

Answer

V = 428.9
7.Complex numbers

Answer: Im(w) = 3.106

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 4 · 3 = 12
θ = 100° + 65° = 165°

Rectangular form

Re(w) = 12·cos(165°) = −11.59
Im(w) = 12·sin(165°) = 3.106
Im(w) = 3.106

Answer

Im(w) = 3.106
8.Complex numbers

Answer: Re(z⁶) = 64

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Polar form

z = 1 + j√3 = 2∠60°

De Moivre

z⁶ = (2)⁶∠360° = 64∠0°

Rectangular form

z⁶ = 64·(cos 0° + j sin 0°) = 64
Re(z⁶) = 64

Answer

Re(z⁶) = 64
9.Differential equations

Answer: k = 0.02005 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−40k = 161/359

Solve for k

k = ln(359/161)/40 = 0.02005 min⁻¹

Answer

k = 0.02005 min⁻¹
10.Differential equations

Answer: y(1.5) = 0.6196

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e2t
(e2ty)′ = 3et

General solution

y = 3/1·e−t + C·e−2t = 3·e−t + C·e−2t

Initial condition

2 = 3 + C → C = −1

Evaluate

y(1.5) = 3·0.2231 + (−1)·0.04979 = 0.6196

Answer

y(1.5) = 0.6196
11.Matrices & determinants

Answer: det A = 63

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −20, M₁₂ = 5, M₁₃ = 13

Cofactor expansion

det A = (−3)·(−20) − 2·5 + 1·13 = 63

Answer

det A = 63
12.Matrices & determinants

Answer: λ = 3

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (5)λ + (6) = 0

Solve

λ = (5 ± √(1))/2 → λ = 2, 3
λ = 3

Answer

λ = 3
13.Vectors: dot & cross product

Answer: compb a = −7.715

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = 7·(−4) + 5·(−5) + 3·1 = −50

Length of b

|b| = √((−4)² + (−5)² + 1²) = 6.481

Scalar projection

compb a = a·b/|b| = −50/6.481 = −7.715

Answer

compb a = −7.715

Negative: a has a component pointing against b.

14.Vectors: dot & cross product

Answer: A = 36.96

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = 5·(−6) − (−3)·0 = −30
(a × b)y = azbx − axbz = (−3)·(−1) − 3·(−6) = 21
(a × b)z = axby − aybx = 3·0 − 5·(−1) = 5

Area

A = |a × b| = √((−30)² + 21² + 5²) = 36.96

Answer

A = 36.96
15.Probability

Answer: Var(X) = 4.51

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.15 + 2·0.35 + 4·0.2 + 6·0.3 = 3.3

Mean of the squares

E(X²) = 0·0.15 + 4·0.35 + 16·0.2 + 36·0.3 = 15.4

Variance

Var(X) = 15.4 − 3.3² = 4.51

Answer

Var(X) = 4.51
16.Probability

Answer: P = 0.1971

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.7511 = 0.04224
P(X = 1) = 11·0.25·0.7510 = 0.1549

Add them

P = 0.04224 + 0.1549 = 0.1971

Answer

P = 0.1971
17.Descriptive statistics

Answer: s = 13.36

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 247/7 = 35.29

Squared deviations

Σ(x − x̄)² = 0.7143² + (−2.286)² + 10.71² + (−10.29)² + 10.71² + (−23.29)² + 13.71² = 1071

Standard deviation

s = √(1071/6) = 13.36

Answer

s = 13.36
18.Descriptive statistics

Answer: P = 0.9332

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 1.5

Standard normal table

Φ(1.5) = 0.9332
P = 0.9332

Answer

P = 0.9332
19.Normal distribution

Answer: P = 0.7881

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 750 g, σ = √(4² + 9²) = 9.849 g

Standardise

z = (742.1 − 750)/9.849 = −0.8

Upper tail

P = 1 − Φ(−0.8) = 1 − 0.2119 = 0.7881

Answer

P = 0.7881
20.Normal distribution

Answer: x = 189.5 cm

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.95

z from the table

z ≈ 1.64

Back to the original units

x = 178 + 1.64·7 = 189.5 cm

Answer

x = 189.5 cm

ExamProblems · examproblems.com/courses/engineering-mathematics