Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (1 + 0.5/x)3x. Give a decimal value.

f(x) = (1 + 0.5/x)3xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e2x − 1 − 2x)/x².

f(x) = (e2x − 1 − 2x)/x²x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = (−2x + 1)4. Find f′(2).

f(x) = (−2x + 1)4x = 2
f′(2) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = 2x2 − 2x at x = 2 crosses the y-axis at y = b. Find b.

f(x) = 2x2 − 2xx = 2
b =
5.IntegralsMedium
xy2y = x

The region under y = x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = x0 ≤ x ≤ 2
V =
6.IntegralsHard
xy2y = xy = 0.5x²

The region between the line y = x and the parabola y = 0.5x² is rotated about the x-axis. Find the volume V of the solid.

y = xy = 0.5x²
V =
7.Complex numbersMedium
ReIm55−5−5θz

Write z = 8∠−20° in rectangular form a + jb and give the real part a.

r = 8θ = −20°
a =
8.Complex numbersHard
ReIm22−2−244−4−4z₁z₂

Solve z² − 3z + 18.25 = 0. The roots are a ± jb; find b > 0.

p = −3q = 18.25
b =
9.Differential equationsMedium
tyy(0) = 2y(0.5) = ?

Solve y″ + 6y′ + 9y = 0 with y(0) = 2 and y′(0) = 0. Find y(0.5).

y″ + 6y′ + 9y = 0y(0) = 2y′(0) = 0
y(0.5) =
10.Differential equationsHard
tyK = 10y(1) = ?

A system obeys y″ + 2y′ + 26y = 260 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(1); angles in radians.

y″ + 2y′ + 26y = 260y(0) = 0y′(0) = 0
y(1) =
11.Matrices & determinantsMedium
A =−6−151B =−5−165

Let C = AB for the matrices shown. Find the entry c11 (row 1, column 1).

A = [−6 −1; 5 1]B = [−5 −1; 6 5]
c11 =
12.Matrices & determinantsHard
A =−2−5−4−1b =−109

Solve the system −2x − 5y = −10 and −4x − y = 9. Find x.

−2x − 5y = −10−4x − y = 9
x =
13.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (−1, 6, 3) and b = (0, −6, 1).

a = (−1, 6, 3)b = (0, −6, 1)
a·b =
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (50, 0, −20) N acts at point A(1, −1, 1). Coordinates are in metres. Find the magnitude |M| of the moment of the force about point O(−1, −2, 1).

F = (50, 0, −20) NA(1, −1, 1) mO(−1, −2, 1) m
|M| = N·m
15.ProbabilityMedium
xp(x)00.310.3520.35μ = 1.05

For the distribution shown, find the variance Var(X) of X.

x: 0, 1, 2p(x): 0.3, 0.35, 0.35
Var(X) =
16.ProbabilityHard
n = 12, p = 0.2: P(X = 4) = ?k0123456789101112

A test has 12 multiple-choice questions. A student who guesses gets each one right with probability 0.2, independently. What is the probability P of exactly 4 correct answers?

n = 12p = 0.2k = 4
P =
17.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 38, 11, 59, 19, 11, 27, 32.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 70 and standard deviation 8. Find the z-score z of a score of 62.

μ = 70σ = 8x = 62
z =
19.Normal distributionMedium
164.35192.35P = ?

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. What fraction lies between 164.35 and 192.35 cm? Give P as a decimal.

μ = 178σ = 7x1 = 164.35x2 = 192.35
P =
20.Normal distributionHard
μ = 250x = ?25%

The bag weights are normally distributed with mean 250 g and standard deviation 5 g. Find the value x below which 25% of them lie (the 25th percentile).

μ = 250σ = 5P = 25%
x = g

3Solutions

1.Limits

Answer: L = 4.482

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Take the logarithm

ln L = limx→∞ 3·x·ln(1 + 0.5/x)

Evaluate

ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.

ln L = 3·0.5 = 1.5

Undo the logarithm

L = e1.5 = 4.482

Answer

L = 4.482
2.Limits

Answer: L = 2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(2·e2x − 2)/(2x) → 0/0

Second application

4·e2x/2

Substitute x = 0

L = 4·1/2 = 2

Answer

L = 2
3.Derivatives

Answer: f′(2) = 216

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 4·(−2x + 1)3·(−2)

Substitute

f′(2) = 4·(−3)3·(−2) = 216

Answer

f′(2) = 216
4.Derivatives

Answer: b = −8

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = 4
f′(x) = 4x − 2 → f′(2) = 6

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 4 − 6·2 = −8

Answer

b = −8
5.Integrals

Answer: V = 8.378

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀2 1x² dx

Integrate

V = π·1·2³/3 = 8.378

Answer

V = 8.378

Check: a cone of radius 2 and height 2 has (1/3)πr²h = 8.378.

6.Integrals

Answer: V = 3.351

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

1x = 0.5x² → x = 0, x = 2

Washer method

V = π∫₀2 ((1x)² − (0.5x²)²) dx

Integrate

V = π(1·2³/3 − 0.25·2⁵/5) = π·1.067 = 3.351

Answer

V = 3.351
7.Complex numbers

Answer: a = 7.518

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 8·cos(−20°) = 7.518
b = 8·sin(−20°) = −2.736

Rectangular form

z = 7.518 − j2.736
a = 7.518

Answer

a = 7.518
8.Complex numbers

Answer: b = 4

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Discriminant

p² − 4q = 9 − 73 = −64 < 0

Quadratic formula

z = (3 ± j√64)/2 = 1.5 + j4, 1.5 − j4

Answer

b = 4

Answer

b = 4
9.Differential equations

Answer: y(0.5) = 1.116

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 3)² = 0 → r = −3

Constants

A = y(0) = 2
y′(0) = B − 3A → B = 0 + 6 = 6

Evaluate

y(0.5) = (2 + 6·0.5)·e−1.5 = 1.116

Answer

y(0.5) = 1.116
10.Differential equations

Answer: y(1) = 9.662

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 10, r = −1 ± 5j

Constants from the initial values

y(0) = 10 + A = 0 → A = −10
y′(0) = −1A + 5B = 0 → B = −2

Evaluate

y(1) = 10·(1 − e−1(cos 5 + 0.2·sin 5)) = 9.662

Answer

y(1) = 9.662
11.Matrices & determinants

Answer: c11 = 24

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c11 = (−6)·(−5) + (−1)·6 = 24

Answer

c11 = 24
12.Matrices & determinants

Answer: x = −3.056

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−2)·(−1) − (−5)·(−4) = −18

Replace the x column

det Aₓ = (−10)·(−1) − (−5)·9 = 55
x = 55/(−18) = −3.056

Answer

x = −3.056
y = 3.222
13.Vectors: dot & cross product

Answer: a·b = −33

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = (−1)·0 + 6·(−6) + 3·1 = 0 + (−36) + 3 = −33

Answer

a·b = −33

Negative: the angle between the vectors is more than 90°.

14.Vectors: dot & cross product

Answer: |M| = 67.08 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (1, −1, 1) − (−1, −2, 1) = (2, 1, 0) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 1·(−20) − 0·0 = −20 N·m
(r × F)y = rzFx − rxFz = 0·50 − 2·(−20) = 40 N·m
(r × F)z = rxFy − ryFx = 2·0 − 1·50 = −50 N·m

Magnitude

|M| = √((−20)² + 40² + (−50)²) = 67.08 N·m

Answer

|M| = 67.08 N·m
15.Probability

Answer: Var(X) = 0.6475

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.3 + 1·0.35 + 2·0.35 = 1.05

Mean of the squares

E(X²) = 0·0.3 + 1·0.35 + 4·0.35 = 1.75

Variance

Var(X) = 1.75 − 1.05² = 0.6475

Answer

Var(X) = 0.6475
16.Probability

Answer: P = 0.1329

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 4) = 495·0.24·0.88 = 495·0.0016·0.1678 = 0.1329

Answer

P = 0.1329
17.Descriptive statistics

Answer: s = 17.01

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 197/7 = 28.14

Squared deviations

Σ(x − x̄)² = 9.857² + (−17.14)² + 30.86² + (−9.143)² + (−17.14)² + (−1.143)² + 3.857² = 1737

Standard deviation

s = √(1737/6) = 17.01

Answer

s = 17.01
18.Descriptive statistics

Answer: z = −1

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (62 − 70)/8 = −1

Answer

z = −1
19.Normal distribution

Answer: P = 0.9542

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (164.35 − 178)/7 = −1.95
z₂ = (192.35 − 178)/7 = 2.05

Area between

P = Φ(2.05) − Φ(−1.95) = 0.9798 − 0.02559 = 0.9542

Answer

P = 0.9542
20.Normal distribution

Answer: x = 246.6 g

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.25 → z = −0.6745

Back to x

x = 250 + −0.6745·5 = 246.63 g

Answer

x = 246.63 g

ExamProblems · examproblems.com/courses/engineering-mathematics