Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (−5x3 − 5x + 1)/(5x3 + 3x + 8).

f(x) = (−5x3 − 5x + 1)/(5x3 + 3x + 8)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e0.5x − 1 − 0.5x)/x².

f(x) = (e0.5x − 1 − 0.5x)/x²x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = (4x − 3)3. Find f′(2).

f(x) = (4x − 3)3x = 2
f′(2) =
4.DerivativesHard
xyx = 1

The tangent line to f(x) = −x2 − 3x at x = 1 crosses the y-axis at y = b. Find b.

f(x) = −x2 − 3xx = 1
b =
5.IntegralsMedium
xy2y = 0.5x

The region under y = 0.5x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = 0.5x0 ≤ x ≤ 2
V =
6.IntegralsHard
xy1.5y = x²eˣ

Evaluate I = ∫₀1.5 x²·eˣ dx.

∫₀1.5 x²eˣ dx
I =
7.Complex numbersMedium
ReIm11−1−122−2−233−3−3z₁z₂w

Given z₁ = 2.5∠70° and z₂ = 4∠−140°, find the real part of w = z₁/z₂.

z₁ = 2.5∠70°z₂ = 4∠−140°
Re(w) =
8.Complex numbersHard
ReIm22−2−244−4−4z₀z₁z₂

The roots of zⁿ = w with n = 3 and w = 64∠0° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, 2. Find the real part of z₂.

w = 64∠0°n = 3k = 2
Re(z₂) =
9.Differential equationsMedium
t (min)T (°C)22Ta​136 °C

A forged steel part at 300 °C is left to cool in a workshop at 20 °C. After 22 min its temperature is 136 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 300 °CTa = 20 °CT(22) = 136 °C
k = min⁻¹
10.Differential equationsHard
ty1.5y(1.5) = ?

Solve y′ + 3y = 6e−0.5t with y(0) = 3. Find y(1.5).

y′ + 3y = 6e−0.5ty(0) = 3
y(1.5) =
11.Matrices & determinantsMedium
A =−3−4−42−300−14

Find the determinant det A of the 3×3 matrix A shown.

A = [−3 −4 −4; 2 −3 0; 0 −1 4]
det A =
12.Matrices & determinantsHard
A =−1−3−24

Find the larger eigenvalue λ of the matrix A shown.

A = [−1 −3; −2 4]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (−6, −3, −5) and b = (−5, k, 2) are perpendicular.

a = (−6, −3, −5)b = (−5, k, 2)
k =
14.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (2, −4, −4) and b = (1, −5, −5) and has a positive z-component. Find its y-component n̂y.

a = (2, −4, −4)b = (1, −5, −5)n̂z > 0
n̂y =
15.ProbabilityMedium
n = 15k = 3N = ?

In how many ways N can a committee of 3 people be chosen from a group of 15? The order does not matter.

n = 15k = 3
N =
16.ProbabilityHard
€p(x)−20.7520.2980.05

A game costs €2 to play. You win €4 with probability 0.2 and €100 with probability 0.05; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.

stake = €2€4: p = 0.2€100: p = 0.05
E(G) = €
17.Descriptive statisticsMedium
20253035404550

Find the sample standard deviation s of the data: 16, 50, 28, 45, 47, 36, 49.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 170 and standard deviation 5. What proportion P of values is above 175?

μ = 170σ = 5x = 175
P =
19.Normal distributionMedium
4975P = ?

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. What fraction lies between 49 and 75 points? Give P as a decimal.

μ = 65σ = 10x1 = 49x2 = 75
P =
20.Normal distributionHard
μ = 65x = ?5%

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. Find the value x below which 5% of them lie (the 5th percentile).

μ = 65σ = 10P = 5%
x = points

3Solutions

1.Limits

Answer: L = −1

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(−5 + (−5)/x2 + 1/x3)/(5 + 3/x2 + 8/x3)

Let x → ∞

L = −5/5 = −1

Answer

L = −1

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 0.125

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(0.5·e0.5x − 0.5)/(2x) → 0/0

Second application

0.25·e0.5x/2

Substitute x = 0

L = 0.25·1/2 = 0.125

Answer

L = 0.125
3.Derivatives

Answer: f′(2) = 300

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 3·(4x − 3)2·4

Substitute

f′(2) = 3·52·4 = 300

Answer

f′(2) = 300
4.Derivatives

Answer: b = 1

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(1) = −4
f′(x) = −2x − 3 → f′(1) = −5

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = −4 − (−5)·1 = 1

Answer

b = 1
5.Integrals

Answer: V = 2.094

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀2 0.25x² dx

Integrate

V = π·0.25·2³/3 = 2.094

Answer

V = 2.094

Check: a cone of radius 1 and height 2 has (1/3)πr²h = 2.094.

6.Integrals

Answer: I = 3.602

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

4.482·(1.25) − 1·2 = 3.602

Answer

I = 3.602
7.Complex numbers

Answer: Re(w) = −0.5413

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 2.5 / 4 = 0.625
θ = 70° − (−140)° = 210° → −150°

Rectangular form

Re(w) = 0.625·cos(−150°) = −0.5413
Im(w) = 0.625·sin(−150°) = −0.3125
Re(w) = −0.5413

Answer

Re(w) = −0.5413
8.Complex numbers

Answer: Re(z₂) = −2

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

641/3 = 4

Argument of the root

θ₂ = (0° + 360°·2)/3 = 240° → −120°

Rectangular form

z₂ = 4·(cos −120° + j sin −120°) = −2 − j3.464
Re(z₂) = −2

Answer

Re(z₂) = −2

The 3 roots lie on the circle of radius 4, 120° apart.

9.Differential equations

Answer: k = 0.04005 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−22k = 116/280

Solve for k

k = ln(280/116)/22 = 0.04005 min⁻¹

Answer

k = 0.04005 min⁻¹
10.Differential equations

Answer: y(1.5) = 1.14

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e3t
(e3ty)′ = 6e2.5t

General solution

y = 6/2.5·e−0.5t + C·e−3t = 2.4·e−0.5t + C·e−3t

Initial condition

3 = 2.4 + C → C = 0.6

Evaluate

y(1.5) = 2.4·0.4724 + 0.6·0.01111 = 1.14

Answer

y(1.5) = 1.14
11.Matrices & determinants

Answer: det A = 76

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −12, M₁₂ = 8, M₁₃ = −2

Cofactor expansion

det A = (−3)·(−12) − (−4)·8 + (−4)·(−2) = 76

Answer

det A = 76
12.Matrices & determinants

Answer: λ = 5

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (3)λ + (−10) = 0

Solve

λ = (3 ± √(49))/2 → λ = −2, 5
λ = 5

Answer

λ = 5
13.Vectors: dot & cross product

Answer: k = 6.667

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = (−6)·(−5) + (−3)·k + (−5)·2 = 0
20 + (−3)·k = 0

Solve for k

k = −20/(−3) = 6.667

Answer

k = 6.667
14.Vectors: dot & cross product

Answer: n̂y = −0.7071

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = (−4)·(−5) − (−4)·(−5) = 0
(a × b)y = azbx − axbz = (−4)·1 − 2·(−5) = 6
(a × b)z = axby − aybx = 2·(−5) − (−4)·1 = −6

Normalise

The z-component of a × b is negative, so use −(a × b).

|a × b| = √(0² + 6² + (−6)²) = 8.485
n̂ = −(0, 6, −6)/8.485 = (0, −0.7071, 0.7071)
n̂y = −0.7071

Answer

n̂y = −0.7071
15.Probability

Answer: N = 455

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(15, 3) = (15·14·13)/(3·2·1) = 455

Answer

N = 455
16.Probability

Answer: E(G) = 3.8 €

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Net outcomes

G: 2 (p = 0.2), 98 (p = 0.05), −2 (p = 0.75)

Expected value

E(G) = 2·0.2 + 98·0.05 − 2·0.75 = 3.8 €

Answer

E(G) = 3.8 €

A positive value means you win money on average.

17.Descriptive statistics

Answer: s = 12.78

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 271/7 = 38.71

Squared deviations

Σ(x − x̄)² = (−22.71)² + 11.29² + (−10.71)² + 6.286² + 8.286² + (−2.714)² + 10.29² = 979.4

Standard deviation

s = √(979.4/6) = 12.78

Answer

s = 12.78
18.Descriptive statistics

Answer: P = 0.1587

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 1

Standard normal table

Φ(1) = 0.8413
P = 1 − 0.8413 = 0.1587

Answer

P = 0.1587
19.Normal distribution

Answer: P = 0.7865

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (49 − 65)/10 = −1.6
z₂ = (75 − 65)/10 = 1

Area between

P = Φ(1) − Φ(−1.6) = 0.8413 − 0.0548 = 0.7865

Answer

P = 0.7865
20.Normal distribution

Answer: x = 48.55 points

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.05 → z = −1.645

Back to x

x = 65 + −1.645·10 = 48.55 points

Answer

x = 48.55 points

ExamProblems · examproblems.com/courses/engineering-mathematics