Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (6x3 − 6x − 3)/(3x3 + 5x + 5).

f(x) = (6x3 − 6x − 3)/(3x3 + 5x + 5)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 3x)/(2x²), with x in radians.

f(x) = (1 − cos 3x)/(2x²)x → 0
L =
3.DerivativesMedium
xyx = 3

Let f(x) = ln(3x2 + 2). Find f′(3).

f(x) = ln(3x2 + 2)x = 3
f′(3) =
4.DerivativesHard
xyx = 3

The tangent line to f(x) = −x2 + 5x − 2 at x = 3 crosses the y-axis at y = b. Find b.

f(x) = −x2 + 5x − 2x = 3
b =
5.IntegralsMedium
xyπ/3y = x·sin x

Evaluate I = ∫₀π/3 x·sin x dx (x in radians).

∫₀π/3 x·sin x dx
I =
6.IntegralsHard
xyy = 0.5x2​y = 4x

Find the area A of the region enclosed by y = 0.5x2 and y = 4x.

y = 0.5x2y = 4x
A =
7.Complex numbersMedium
ReIm55−5−51010−10−10θz

Write z = 12∠110° in rectangular form a + jb and give the imaginary part b.

r = 12θ = 110°
b =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₀z₁z₂z₃

The roots of zⁿ = w with n = 4 and w = 81∠−90° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, 2, 3. Find the argument of z₁ in degrees, between −180° and 180°.

w = 81∠−90°n = 4k = 1
θ₁ = °
9.Differential equationsMedium
t (min)T (°C)8Ta​55 °C

A cup of coffee at 87 °C is left in a room at 19 °C. After 8 min its temperature is 55 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 87 °CTa = 19 °CT(8) = 55 °C
k = min⁻¹
10.Differential equationsHard
xy12(1, 5)y(2) = ?

Solve the initial value problem y′ + 3y/x = 5 for x > 0, with y(1) = 5. Find y(2).

y′ + 3y/x = 5y(1) = 5
y(2) =
11.Matrices & determinantsMedium
A =60−42B =4−143

Let C = AB for the matrices shown. Find the entry c11 (row 1, column 1).

A = [6 0; −4 2]B = [4 −1; 4 3]
c11 =
12.Matrices & determinantsHard
A =−6−24−3b =1−2

Solve the system −6x − 2y = 1 and 4x − 3y = −2. Find x.

−6x − 2y = 14x − 3y = −2
x =
13.Vectors: dot & cross productMedium
xyzdFAB

A constant force F = (5, 30, −30) N acts on an object while it moves in a straight line from point A(1, −2, 2) to point B(−3, 5, −5). Coordinates are in metres. Find the work W done by the force.

F = (5, 30, −30) NA(1, −2, 2) mB(−3, 5, −5) m
W = J
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−30, −50, 30) N acts at point A(2, 1, 4). Coordinates are in metres. Find the z-component Mz of the moment of the force about the origin O(0, 0, 0).

F = (−30, −50, 30) NA(2, 1, 4) mO(0, 0, 0) m
Mz = N·m
15.ProbabilityMedium
xp(x)00.210.320.330.2μ = 1.5

For the distribution shown, find the standard deviation σ of X.

x: 0, 1, 2, 3p(x): 0.2, 0.3, 0.3, 0.2
σ =
16.ProbabilityHard
xp(x)100.1200.3300.25400.35μ

X has the distribution shown, and Y = 3X + 20. Find the standard deviation σY of Y.

x: 10, 20, 30, 40p(x): 0.1, 0.3, 0.25, 0.35Y = 3X + 20
σY =
17.Descriptive statisticsMedium
25303540455055

Find the sample standard deviation s of the data: 46, 22, 30, 58, 24, 38.

n = 6
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 170 and standard deviation 15. Find the z-score z of a score of 185.

μ = 170σ = 15x = 185
z =
19.Normal distributionMedium
96.25118P = ?

The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. What fraction lies between 96.25 and 118 points? Give P as a decimal.

μ = 100σ = 15x1 = 96.25x2 = 118
P =
20.Normal distributionHard
557085100115130145pointsbottom 40%

The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. Drag the cut-off so the shaded bottom 40% is to the left of it. Find the cut-off x.

μ = 100 pointsσ = 15 points40%
x = points

3Solutions

1.Limits

Answer: L = 2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(6 + (−6)/x2 + (−3)/x3)/(3 + 5/x2 + 5/x3)

Let x → ∞

L = 6/3 = 2

Answer

L = 2

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 2.25

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

3·sin 3x/(4x) → 0/0

Second application

9·cos 3x/4

Substitute x = 0

L = 9/4 = 2.25

Answer

L = 2.25
3.Derivatives

Answer: f′(3) = 0.6207

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule for the logarithm

f′(x) = 6x/(3x2 + 2)

Substitute

f′(3) = 18/29 = 0.6207

Answer

f′(3) = 0.6207
4.Derivatives

Answer: b = 7

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(3) = 4
f′(x) = −2x + 5 → f′(3) = −1

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 4 − (−1)·3 = 7

Answer

b = 7
5.Integrals

Answer: I = 0.3424

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−π/3·cos π/3 + sin π/3) − (0 + 0) = 0.3424

Answer

I = 0.3424
6.Integrals

Answer: A = 42.67

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

0.5x2 = 4x → x = 0, x = 8

Integrate upper minus lower

A = [2x2 − 0.1667x3]08 = 42.67

Answer

A = 42.67
7.Complex numbers

Answer: b = 11.28

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 12·cos(110°) = −4.104
b = 12·sin(110°) = 11.28

Rectangular form

z = −4.104 + j11.28
b = 11.28

Answer

b = 11.28
8.Complex numbers

Answer: θ₁ = 67.5 °

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

811/4 = 3

Argument of the root

θ₁ = (−90° + 360°·1)/4 = 67.5°

Argument

θ₁ = 67.5°

Answer

θ₁ = 67.5°

The 4 roots lie on the circle of radius 3, 90° apart.

9.Differential equations

Answer: k = 0.0795 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−8k = 36/68

Solve for k

k = ln(68/36)/8 = 0.0795 min⁻¹

Answer

k = 0.0795 min⁻¹
10.Differential equations

Answer: y(2) = 2.969

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫3/x dx = x3

Integrate

(x3y)′ = 5x3 → x3y = 5x4/4 + C

Initial condition

5 = 5/4 + C → C = 3.75

Evaluate

y(2) = (5·24/4 + 3.75)/23 = 2.969

Answer

y(2) = 2.969
11.Matrices & determinants

Answer: c11 = 24

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c11 = 6·4 + 0·4 = 24

Answer

c11 = 24
12.Matrices & determinants

Answer: x = −0.2692

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−6)·(−3) − (−2)·4 = 26

Replace the x column

det Aₓ = 1·(−3) − (−2)·(−2) = −7
x = −7/26 = −0.2692

Answer

x = −0.2692
y = 0.3077
13.Vectors: dot & cross product

Answer: W = 400 J

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Displacement

d = B − A = (−3, 5, −5) − (1, −2, 2) = (−4, 7, −7) m

Work

W = F·d = 5·(−4) + 30·7 + (−30)·(−7) = 400 J

Answer

W = 400 J
14.Vectors: dot & cross product

Answer: Mz = −70 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (2, 1, 4) − (0, 0, 0) = (2, 1, 4) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 1·30 − 4·(−50) = 230 N·m
(r × F)y = rzFx − rxFz = 4·(−30) − 2·30 = −180 N·m
(r × F)z = rxFy − ryFx = 2·(−50) − 1·(−30) = −70 N·m

Requested component

Mz = −70 N·m

Answer

Mz = −70 N·m
15.Probability

Answer: σ = 1.025

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.2 + 1·0.3 + 2·0.3 + 3·0.2 = 1.5

Mean of the squares

E(X²) = 0·0.2 + 1·0.3 + 4·0.3 + 9·0.2 = 3.3

Variance

Var(X) = 3.3 − 1.5² = 1.05
σ = √1.05 = 1.025

Answer

σ = 1.025
16.Probability

Answer: σY = 30.41

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Spread of X

μ = 28.5, Var(X) = 102.8, σX = 10.14

Linear change

σY = |3|·10.14 = 30.41

Answer

σY = 30.41

The mean does move: E(Y) = 3·28.5 + 20 = 105.5.

17.Descriptive statistics

Answer: s = 13.88

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 218/6 = 36.33

Squared deviations

Σ(x − x̄)² = 9.667² + (−14.33)² + (−6.333)² + 21.67² + (−12.33)² + 1.667² = 963.3

Standard deviation

s = √(963.3/5) = 13.88

Answer

s = 13.88
18.Descriptive statistics

Answer: z = 1

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (185 − 170)/15 = 1

Answer

z = 1
19.Normal distribution

Answer: P = 0.4836

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (96.25 − 100)/15 = −0.25
z₂ = (118 − 100)/15 = 1.2

Area between

P = Φ(1.2) − Φ(−0.25) = 0.8849 − 0.4013 = 0.4836

Answer

P = 0.4836
20.Normal distribution

Answer: x = 96.3 points

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.4

z from the table

z ≈ −0.25

Back to the original units

x = 100 − 0.25·15 = 96.3 points

Answer

x = 96.3 points

ExamProblems · examproblems.com/courses/engineering-mathematics