Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (1 + 0.5/x)2x. Give a decimal value.
f(x) = (1 + 0.5/x)2xx → ∞
L =
2.LimitsHard
Find the limit L = limx→0 ln(1 + x)/sin(2x), with x in radians.
f(x) = ln(1 + x)/sin(2x)x → 0
L =
3.DerivativesMedium
Let f(x) = ln(3x2 + 2). Find f′(2).
f(x) = ln(3x2 + 2)x = 2
f′(2) =
4.DerivativesHard
Let f(x) = x3 − 4.5x2 + 6x − 2. Find the x-coordinate x of the local minimum.
f(x) = x3 − 4.5x2 + 6x − 2
x =
5.IntegralsMedium
The region under y = x from x = 0 to x = 1 is rotated about the x-axis. Find the volume V of the solid (a cone).
y = x0 ≤ x ≤ 1
V =
6.IntegralsHard
Find the area A of the region enclosed by y = x2 and y = 2x.
y = x2y = 2x
A =
7.Complex numbersMedium
Write z = 4∠110° in rectangular form a + jb and give the imaginary part b.
r = 4θ = 110°
b =
8.Complex numbersHard
Exactly one of the points A–D is a root of z³ = 8∠0°. Click it.
w = 8∠0°n = 3
1A (2∠0°)
2B (2∠180°)
3C (2∠30°)
4D (1∠0°)
9.Differential equationsMedium
A forged steel part at 500 °C is left to cool in a workshop at 24 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.02 min⁻¹, find its temperature T after 47 min.
T0 = 500 °CTa = 24 °Ck = 0.02 min⁻¹t = 47 min
T = °C
10.Differential equationsHard
A tank holds 100 L of pure water. Brine with 0.1 kg of salt per litre flows in at 10 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 7 kg of salt?
V = 100 Lm0 = 0 kgc = 0.1 kg/Lr = 10 L/min
t = min
11.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c11 (row 1, column 1).
A = [3 6; −2 −4]B = [−1 −5; 1 −3]
c11 =
12.Matrices & determinantsHard
Solve the system −3x − 2y = −4 and 3x + y = −1. Find x.
−3x − 2y = −43x + y = −1
x =
13.Vectors: dot & cross productMedium
Find the value of k for which the vectors a = (−4, −1, 3) and b = (−2, k, −6) are perpendicular.
a = (−4, −1, 3)b = (−2, k, −6)
k =
14.Vectors: dot & cross productHard
Find the volume V of the parallelepiped whose edges from one corner are a = (−2, 4, 0), b = (−1, −4, 5) and c = (−5, 3, 3).
a = (−2, 4, 0)b = (−1, −4, 5)c = (−5, 3, 3)
V =
15.ProbabilityMedium
A bag holds 4 red and 7 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?
4 / 7
P =
16.ProbabilityHard
A test has 6 multiple-choice questions. A student who guesses gets each one right with probability 0.3, independently. What is the probability P of exactly 4 correct answers?
n = 6p = 0.3k = 4
P =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 42, 26, 37, 40, 34, 29, 48.
n = 7
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 500 and standard deviation 25. What proportion P of values is above 450?
μ = 500σ = 25x = 450
P =
19.Normal distributionMedium
Drag z so that the shaded area between −z and z under the standard normal curve is 0.9651. Find z to two decimals.
A = 0.9651
z =
20.Normal distributionHard
Hole diameters D are normal with mean 25.05 mm and standard deviation 0.02 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.015 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
hole: μ = 25.05 mm, σ = 0.02 mmshaft: μ = 25 mm, σ = 0.015 mm
P =
3Solutions
1.Limits
Answer: L = 2.718
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Take the logarithm
ln L = limx→∞ 2·x·ln(1 + 0.5/x)
Evaluate
ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.
ln L = 2·0.5 = 1
Undo the logarithm
L = e1 = 2.718
Answer
L = 2.718
2.Limits
Answer: L = 0.5
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
L'Hôpital's rule
L = limx→0 [1/(1 + x)]/[2·cos 2x]
Substitute x = 0
L = 1/2 = 0.5
Answer
L = 0.5
3.Derivatives
Answer: f′(2) = 0.8571
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule for the logarithm
f′(x) = 6x/(3x2 + 2)
Substitute
f′(2) = 12/14 = 0.8571
Answer
f′(2) = 0.8571
4.Derivatives
Answer: x = 2
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 − 9x + 6 = 3·(x2 − 3x + 2)
Solve f′(x) = 0
x = 1 or x = 2
Which one is which
f″(x) = 6x − 9: negative at a maximum, positive at a minimum.
f″(1) = −3, f″(2) = 3
x = 2
Answer
x = 2
5.Integrals
Answer: V = 1.047
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀1 1x² dx
Integrate
V = π·1·1³/3 = 1.047
Answer
V = 1.047
Check: a cone of radius 1 and height 1 has (1/3)πr²h = 1.047.
6.Integrals
Answer: A = 1.333
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Intersection points
x2 = 2x → x = 0, x = 2
Integrate upper minus lower
A = [x2 − 0.3333x3]02 = 1.333
Answer
A = 1.333
7.Complex numbers
Answer: b = 3.759
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Components
a = 4·cos(110°) = −1.368
b = 4·sin(110°) = 3.759
Rectangular form
z = −1.368 + j3.759
b = 3.759
Answer
b = 3.759
8.Complex numbers
Answer: A (2∠0°)
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Modulus and arguments of the roots
|z| = 2
θ = 0°, 120°, −120°
The point
A = 2∠0°
Answer
A (2∠0°)
9.Differential equations
Answer: T = 209.9 °C
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Solution of the cooling law
T(t) = 24 + 476·e−0.02t
Substitute t
T(47) = 24 + 476·0.3906 = 209.9 °C
Answer
T = 209.9 °C
10.Differential equations
Answer: t = 12.04 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Result
m(t) = 10 + (−10)·e−t/10
Solve for t
e−t/10 = (10 − 7)/(10 − 0) = 0.3
t = 10·ln(3.333) = 12.04 min
Answer
t = 12.04 min
11.Matrices & determinants
Answer: c11 = 3
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c11 = 3·(−1) + 6·1 = 3
Answer
c11 = 3
12.Matrices & determinants
Answer: x = −2
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = (−3)·1 − (−2)·3 = 3
Replace the x column
det Aₓ = (−4)·1 − (−2)·(−1) = −6
x = −6/3 = −2
Answer
x = −2
y = 5
13.Vectors: dot & cross product
Answer: k = −10
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Dot product equals zero
a·b = (−4)·(−2) + (−1)·k + 3·(−6) = 0
−10 + (−1)·k = 0
Solve for k
k = −(−10)/(−1) = −10
Answer
k = −10
14.Vectors: dot & cross product
Answer: V = 34
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Cross product b × c
(b × c)x = bycz − bzcy = (−4)·3 − 5·3 = −27
(b × c)y = bzcx − bxcz = 5·(−5) − (−1)·3 = −22
(b × c)z = bxcy − bycx = (−1)·3 − (−4)·(−5) = −23
Dot product with a
a·(b × c) = (−2)·(−27) + 4·(−22) + 0·(−23) = −34
V = |−34| = 34
Answer
V = 34
15.Probability
Answer: P = 0.1091
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
First and second draw
P = 4/11 · 3/10 = 12/110 = 0.1091
Answer
P = 0.1091
16.Probability
Answer: P = 0.05953
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = −2
Standard normal table
Φ(−2) = 0.02275
P = 1 − 0.02275 = 0.9772
Answer
P = 0.9772
19.Normal distribution
Answer: z = 2.11
From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.
Area to the left of z
Φ(z) = (1 + 0.9651)/2 = 0.9826
Read the z-table backwards
Find 0.9826 inside the table and read off z.
z = 2.11
Answer
z = 2.11
20.Normal distribution
Answer: P = 0.9772
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).