Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (−3x2 + 5x + 5)/(x2 + 2x + 9).
f(x) = (−3x2 + 5x + 5)/(x2 + 2x + 9)x → ∞
L =
2.LimitsHard
Find the limit L = limx→0 ln(1 + 5x)/sin(4x), with x in radians.
f(x) = ln(1 + 5x)/sin(4x)x → 0
L =
3.DerivativesMedium
Let f(x) = (−2x + 3)5. Find f′(1).
f(x) = (−2x + 3)5x = 1
f′(1) =
4.DerivativesHard
Let f(x) = x3 − 3x2 − 9x − 1. Find the x-coordinate x of the local maximum.
f(x) = x3 − 3x2 − 9x − 1
x =
5.IntegralsMedium
Evaluate I = ∫01 e2x dx.
f(x) = e2x[0, 1]
I =
6.IntegralsHard
Find the area A of the region enclosed by y = 0.5x2 and y = 3x.
y = 0.5x2y = 3x
A =
7.Complex numbersMedium
The number z = 3·e−j1 has its angle in radians. Find its real part a.
r = 3θ = −1 rad
a =
8.Complex numbersHard
The equation z² − 4z + 8 = 0 has two complex roots. Find their modulus |z|.
p = −4q = 8
|z| =
9.Differential equationsMedium
Solve y″ + 7y′ + 12y = 0 with y(0) = 4 and y′(0) = 4. Find y(2).
y″ + 7y′ + 12y = 0y(0) = 4y′(0) = 4
y(2) =
10.Differential equationsHard
A system obeys y″ + y′ + 25.25y = 252.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.
y″ + y′ + 25.25y = 252.5y(0) = 0y′(0) = 0
ymax =
11.Matrices & determinantsMedium
Find the determinant det A of the 3×3 matrix A shown.
A = [1 0 1; 1 0 0; −4 −1 3]
det A =
12.Matrices & determinantsHard
Find the larger eigenvalue λ of the matrix A shown.
A = [2 2; −1 −1]
λ =
13.Vectors: dot & cross productMedium
A constant force F = (0, −5, −25) N acts on an object while it moves in a straight line from point A(3, 3, −1) to point B(4, 4, 0). Coordinates are in metres. Find the work W done by the force.
F = (0, −5, −25) NA(3, 3, −1) mB(4, 4, 0) m
W = J
14.Vectors: dot & cross productHard
Find the area A of the parallelogram spanned by a = (2, 6, 4) and b = (3, 4, −1).
a = (2, 6, 4)b = (3, 4, −1)
A =
15.ProbabilityMedium
For the distribution shown, find the standard deviation σ of X.
x: 0, 1, 2, 3p(x): 0.25, 0.35, 0.15, 0.25
σ =
16.ProbabilityHard
X has the distribution shown, and Y = 2X + 5. Find the standard deviation σY of Y.
Find the sample standard deviation s of the data: 43, 58, 57, 43, 33, 60.
n = 6
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 100 and standard deviation 5. What proportion P of values is below 92.5?
μ = 100σ = 5x = 92.5
P =
19.Normal distributionMedium
The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. What fraction lies between 174.5 and 192.35 cm? Give P as a decimal.
μ = 178σ = 7x1 = 174.5x2 = 192.35
P =
20.Normal distributionHard
The heights X of men and Y of women in a group are independent and normal: X has mean 180 cm and standard deviation 10 cm, Y has mean 170 cm and standard deviation 12 cm. Find the probability P that X is greater than Y. Round z to two decimals.
μX = 180 cm, σX = 10 cmμY = 170 cm, σY = 12 cm
P =
3Solutions
1.Limits
Answer: L = −3
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Divide by the highest power
(−3 + 5/x + 5/x2)/(1 + 2/x + 9/x2)
Let x → ∞
L = −3/1 = −3
Answer
L = −3
For equal degrees the limit is the ratio of the leading coefficients.
2.Limits
Answer: L = 1.25
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
L'Hôpital's rule
L = limx→0 [5/(1 + 5x)]/[4·cos 4x]
Substitute x = 0
L = 5/4 = 1.25
Answer
L = 1.25
3.Derivatives
Answer: f′(1) = −10
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule
f′(x) = 5·(−2x + 3)4·(−2)
Substitute
f′(1) = 5·14·(−2) = −10
Answer
f′(1) = −10
4.Derivatives
Answer: x = −1
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 − 6x − 9 = 3·(x2 − 2x − 3)
Solve f′(x) = 0
x = −1 or x = 3
Which one is which
f″(x) = 6x − 6: negative at a maximum, positive at a minimum.
f″(−1) = −12, f″(3) = 12
x = −1
Answer
x = −1
5.Integrals
Answer: I = 3.195
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Antiderivative
F(x) = e2x/2
Evaluate at the limits
I = (e2 − 1)/2 = (7.389 − 1)/2 = 3.195
Answer
I = 3.195
6.Integrals
Answer: A = 18
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Intersection points
0.5x2 = 3x → x = 0, x = 6
Integrate upper minus lower
A = [1.5x2 − 0.1667x3]06 = 18
Answer
A = 18
7.Complex numbers
Answer: a = 1.621
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Euler's formula
z = 3·(cos −1 + j sin −1)
Components (radians)
a = 3·cos −1 = 1.621
b = 3·sin −1 = −2.524
a = 1.621
Answer
a = 1.621
8.Complex numbers
Answer: |z| = 2.828
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Discriminant
p² − 4q = 16 − 32 = −16 < 0
Quadratic formula
z = (4 ± j√16)/2 = 2 + j2, 2 − j2
Answer
|z| = √(2² + 2²) = √8 = 2.828
Answer
|z| = 2.828
9.Differential equations
Answer: y(2) = 0.04421
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Characteristic roots
(r + 3)(r + 4) = 0 → r = −3, −4
Constants from the initial values
A + B = 4, −3A − 4B = 4
A = 20, B = −16
Evaluate
y(2) = 20·e−6 + (−16)·e−8 = 0.04421
Answer
y(2) = 0.04421
10.Differential equations
Answer: ymax = 17.3
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Steady value and roots
yss = 10, r = −0.5 ± 5j
Constants from the initial values
y(0) = 10 + A = 0 → A = −10
y′(0) = −0.5A + 5B = 0 → B = −1
Peak
t = π/5 = 0.6283
ymax = 10·(1 + e−0.5·π/5) = 17.3
Answer
ymax = 17.3
11.Matrices & determinants
Answer: det A = −1
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
2×2 minors of the first row
M₁₁ = 0, M₁₂ = 3, M₁₃ = −1
Cofactor expansion
det A = 1·0 − 0·3 + 1·(−1) = −1
Answer
det A = −1
12.Matrices & determinants
Answer: λ = 1
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Characteristic equation
λ² − (1)λ + (0) = 0
Solve
λ = (1 ± √(1))/2 → λ = 0, 1
λ = 1
Answer
λ = 1
13.Vectors: dot & cross product
Answer: W = −30 J
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Displacement
d = B − A = (4, 4, 0) − (3, 3, −1) = (1, 1, 1) m
Work
W = F·d = 0·1 + (−5)·1 + (−25)·1 = −30 J
Answer
W = −30 J
Negative work: the force acts mostly against the motion.
14.Vectors: dot & cross product
Answer: A = 27.93
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Cross product
(a × b)x = aybz − azby = 6·(−1) − 4·4 = −22
(a × b)y = azbx − axbz = 4·3 − 2·(−1) = 14
(a × b)z = axby − aybx = 2·4 − 6·3 = −10
Area
A = |a × b| = √((−22)² + 14² + (−10)²) = 27.93
Answer
A = 27.93
15.Probability
Answer: σ = 1.114
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Mean
μ = 0·0.25 + 1·0.35 + 2·0.15 + 3·0.25 = 1.4
Mean of the squares
E(X²) = 0·0.25 + 1·0.35 + 4·0.15 + 9·0.25 = 3.2
Variance
Var(X) = 3.2 − 1.4² = 1.24
σ = √1.24 = 1.114
Answer
σ = 1.114
16.Probability
Answer: σY = 2.704
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Spread of X
μ = 2.15, Var(X) = 1.827, σX = 1.352
Linear change
σY = |2|·1.352 = 2.704
Answer
σY = 2.704
The mean does move: E(Y) = 2·2.15 + 5 = 9.3.
17.Descriptive statistics
Answer: s = 10.9
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = −1.5
Standard normal table
Φ(−1.5) = 0.06681
P = 0.06681
Answer
P = 0.06681
19.Normal distribution
Answer: P = 0.6713
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
z-scores
z₁ = (174.5 − 178)/7 = −0.5
z₂ = (192.35 − 178)/7 = 2.05
Area between
P = Φ(2.05) − Φ(−0.5) = 0.9798 − 0.3085 = 0.6713
Answer
P = 0.6713
20.Normal distribution
Answer: P = 0.7389
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).