Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (4x2 + 5x + 2)/(3x2 + 4x + 1).
f(x) = (4x2 + 5x + 2)/(3x2 + 4x + 1)x → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (1 − cos 3x)/(2x²), with x in radians.
f(x) = (1 − cos 3x)/(2x²)x → 0
L =
3.DerivativesMedium
Let f(x) = (−2x − 3)3. Find f′(0).
f(x) = (−2x − 3)3x = 0
f′(0) =
4.DerivativesHard
The tangent line to f(x) = x2 + 2x − 2 at x = 2 crosses the y-axis at y = b. Find b.
f(x) = x2 + 2x − 2x = 2
b =
5.IntegralsMedium
Evaluate I = ∫02 2x·(x² + 1)1 dx.
f(x) = 2x·(x² + 1)1[0, 2]
I =
6.IntegralsHard
The region between the line y = 5x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.
y = 5xy = 3x²
V =
7.Complex numbersMedium
The number z = 2.5·ej2.8 has its angle in radians. Find its imaginary part b.
r = 2.5θ = 2.8 rad
b =
8.Complex numbersHard
Exactly one of the points A–D is a root of z⁶ = 64∠60°. Click it.
w = 64∠60°n = 6
1A (2∠130°)
2B (3.6∠130°)
3C (2∠160°)
4D (2∠60°)
9.Differential equationsMedium
A can of soda at 5 °C is taken out of the fridge into a room at 27 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.04 min⁻¹, find its temperature T after 11 min.
T0 = 5 °CTa = 27 °Ck = 0.04 min⁻¹t = 11 min
T = °C
10.Differential equationsHard
A system obeys y″ + 3y′ + 18.25y = 36.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.
y″ + 3y′ + 18.25y = 36.5y(0) = 0y′(0) = 0
ymax =
11.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c22 (row 2, column 2).
A = [4 −4; −4 −1]B = [6 2; 2 −1]
c22 =
12.Matrices & determinantsHard
Solve the system x − 4y = 1 and 4x + 3y = −3. Find x.
x − 4y = 14x + 3y = −3
x =
13.Vectors: dot & cross productMedium
Find the dot product a·b of a = (4, 1, −5) and b = (3, 6, 1).
a = (4, 1, −5)b = (3, 6, 1)
a·b =
14.Vectors: dot & cross productHard
Find the volume V of the parallelepiped whose edges from one corner are a = (2, −4, −4), b = (−4, 5, 2) and c = (1, 2, 0).
a = (2, −4, −4)b = (−4, 5, 2)c = (1, 2, 0)
V =
15.ProbabilityMedium
For the distribution shown, find the variance Var(X) of X.
x: 0, 1, 2, 3, 4p(x): 0.2, 0.15, 0.3, 0.25, 0.1
Var(X) =
16.ProbabilityHard
9 components are tested, and each one fails with probability 0.6, independently. What is the probability P that at most one fails?
n = 9p = 0.6
P =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 16, 10, 34, 20, 57, 13.
n = 6
s =
18.Descriptive statisticsHard
Exam scores are normally distributed with mean 50 and standard deviation 8. Find the z-score z of a score of 42.
μ = 50σ = 8x = 42
z =
19.Normal distributionMedium
The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. What fraction lies between 70 and 127.75 points? Give P as a decimal.
μ = 100σ = 15x1 = 70x2 = 127.75
P =
20.Normal distributionHard
The heights X of men and Y of women in a group are independent and normal: X has mean 180 cm and standard deviation 10 cm, Y has mean 170 cm and standard deviation 12 cm. Find the probability P that X is greater than Y. Round z to two decimals.
μX = 180 cm, σX = 10 cmμY = 170 cm, σY = 12 cm
P =
3Solutions
1.Limits
Answer: L = 1.333
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Divide by the highest power
(4 + 5/x + 2/x2)/(3 + 4/x + 1/x2)
Let x → ∞
L = 4/3 = 1.333
Answer
L = 1.333
For equal degrees the limit is the ratio of the leading coefficients.
2.Limits
Answer: L = 2.25
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
3·sin 3x/(4x) → 0/0
Second application
9·cos 3x/4
Substitute x = 0
L = 9/4 = 2.25
Answer
L = 2.25
3.Derivatives
Answer: f′(0) = −54
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule
f′(x) = 3·(−2x − 3)2·(−2)
Substitute
f′(0) = 3·(−3)2·(−2) = −54
Answer
f′(0) = −54
4.Derivatives
Answer: b = −6
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Point and slope
f(2) = 6
f′(x) = 2x + 2 → f′(2) = 6
Tangent line at x = 0
b = f(x₀) − f′(x₀)·x₀ = 6 − 6·2 = −6
Answer
b = −6
5.Integrals
Answer: I = 12
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Substitution
u = x² + 1, du = 2x dx
I = ∫15 u1 du
Integrate and evaluate
I = [u2/2]15 = (25 − 1)/2 = 12
Answer
I = 12
6.Integrals
Answer: V = 48.48
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Intersection points
5x = 3x² → x = 0, x = 1.667
Washer method
V = π∫₀1.667 ((5x)² − (3x²)²) dx
Integrate
V = π(25·1.667³/3 − 9·1.667⁵/5) = π·15.43 = 48.48
Answer
V = 48.48
7.Complex numbers
Answer: b = 0.8375
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Euler's formula
z = 2.5·(cos 2.8 + j sin 2.8)
Components (radians)
a = 2.5·cos 2.8 = −2.356
b = 2.5·sin 2.8 = 0.8375
b = 0.8375
Answer
b = 0.8375
8.Complex numbers
Answer: A (2∠130°)
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Modulus and arguments of the roots
|z| = 2
θ = 10°, 70°, 130°, −170°, −110°, −50°
The point
A = 2∠130°
Answer
A (2∠130°)
9.Differential equations
Answer: T = 12.83 °C
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Solution of the cooling law
T(t) = 27 + (−22)·e−0.04t
Substitute t
T(11) = 27 + (−22)·0.644 = 12.83 °C
Answer
T = 12.83 °C
10.Differential equations
Answer: ymax = 2.616
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Steady value and roots
yss = 2, r = −1.5 ± 4j
Constants from the initial values
y(0) = 2 + A = 0 → A = −2
y′(0) = −1.5A + 4B = 0 → B = −0.75
Peak
t = π/4 = 0.7854
ymax = 2·(1 + e−1.5·π/4) = 2.616
Answer
ymax = 2.616
11.Matrices & determinants
Answer: c22 = −7
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c22 = (−4)·2 + (−1)·(−1) = −7
Answer
c22 = −7
12.Matrices & determinants
Answer: x = −0.4737
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = 1·3 − (−4)·4 = 19
Replace the x column
det Aₓ = 1·3 − (−4)·(−3) = −9
x = −9/19 = −0.4737
Answer
x = −0.4737
y = −0.3684
13.Vectors: dot & cross product
Answer: a·b = 13
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Multiply matching components and add
a·b = 4·3 + 1·6 + (−5)·1 = 12 + 6 + (−5) = 13
Answer
a·b = 13
Positive: the angle between the vectors is less than 90°.
14.Vectors: dot & cross product
Answer: V = 36
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Cross product b × c
(b × c)x = bycz − bzcy = 5·0 − 2·2 = −4
(b × c)y = bzcx − bxcz = 2·1 − (−4)·0 = 2
(b × c)z = bxcy − bycx = (−4)·2 − 5·1 = −13
Dot product with a
a·(b × c) = 2·(−4) + (−4)·2 + (−4)·(−13) = 36
V = |36| = 36
Answer
V = 36
15.Probability
Answer: Var(X) = 1.59
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Zero and one failure
P(X = 0) = 0.49 = 0.0002621
P(X = 1) = 9·0.6·0.48 = 0.003539
Add them
P = 0.0002621 + 0.003539 = 0.003801
Answer
P = 0.003801
17.Descriptive statistics
Answer: s = 17.78
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = (42 − 50)/8 = −1
Answer
z = −1
19.Normal distribution
Answer: P = 0.9451
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
z-scores
z₁ = (70 − 100)/15 = −2
z₂ = (127.75 − 100)/15 = 1.85
Area between
P = Φ(1.85) − Φ(−2) = 0.9678 − 0.02275 = 0.9451
Answer
P = 0.9451
20.Normal distribution
Answer: P = 0.7389
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).