Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (x3 − 1)/(2x3 + 6x + 4).

f(x) = (x3 − 1)/(2x3 + 6x + 4)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e3x − 1 − 3x)/x².

f(x) = (e3x − 1 − 3x)/x²x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = x·sin(x), with x in radians. Find f′(1).

f(x) = x·sin(x)x = 1 rad
f′(1) =
4.DerivativesHard
xy

Let f(x) = x3 − 7.5x2 + 18x + 4. Find the x-coordinate x of the local maximum.

f(x) = x3 − 7.5x2 + 18x + 4
x =
5.IntegralsMedium
xy1y = x·cos x

Evaluate I = ∫₀1 x·cos x dx (x in radians).

∫₀1 x·cos x dx
I =
6.IntegralsHard
xy1.5y = x²eˣ

Evaluate I = ∫₀1.5 x²·eˣ dx.

∫₀1.5 x²eˣ dx
I =
7.Complex numbersMedium
ReIm22−2−244−4−466−6−6θz

Write z = −6 + j6 in exponential form r·ejθ. Give θ in radians, between −π and π.

z = −6 + j6
θ = rad
8.Complex numbersHard
ReIm22−2−244−4−466−6−6ABCD

Exactly one of the points A–D is a root of z⁶ = 729∠120°. Click it.

w = 729∠120°n = 6
  1. 1A (3∠170°)
  2. 2B (5.4∠170°)
  3. 3C (3∠−140°)
  4. 4D (3∠140°)
9.Differential equationsMedium
t (min)T (°C)25Ta​35 °C

A cup of coffee at 83 °C is left in a room at 21 °C. After 25 min its temperature is 35 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 83 °CTa = 21 °CT(25) = 35 °C
k = min⁻¹
10.Differential equationsHard
t (min)m (kg)t = ?60 kg

A tank holds 1000 L of pure water. Brine with 0.1 kg of salt per litre flows in at 5 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 60 kg of salt?

V = 1000 Lm0 = 0 kgc = 0.1 kg/Lr = 5 L/min
t = min
11.Matrices & determinantsMedium
A =−2−54−5B =3−145

Let C = AB for the matrices shown. Find the entry c21 (row 2, column 1).

A = [−2 −5; 4 −5]B = [3 −1; 4 5]
c21 =
12.Matrices & determinantsHard
A =−13−4−5b =5−12

Solve the system −x + 3y = 5 and −4x − 5y = −12. Find x.

−x + 3y = 5−4x − 5y = −12
x =
13.Vectors: dot & cross productMedium
xyzab

Find the scalar projection compb a of a = (2, −1, 5) onto b = (6, −1, 4), that is, the component of a in the direction of b.

a = (2, −1, 5)b = (6, −1, 4)
compb a =
14.Vectors: dot & cross productHard
xyzab

For a = (3, 6, 2) and b = (5, 1, −4), find the x-component (a × b)x of the cross product a × b.

a = (3, 6, 2)b = (5, 1, −4)
(a × b)x =
15.ProbabilityMedium
n = 7k = 3N = ?

In how many ways N can a committee of 3 people be chosen from a group of 7? The order does not matter.

n = 7k = 3
N =
16.ProbabilityHard
€p(x)−50.69100.32450.01

A game costs €5 to play. You win €15 with probability 0.3 and €250 with probability 0.01; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.

stake = €5€15: p = 0.3€250: p = 0.01
E(G) = €
17.Descriptive statisticsMedium
12131415161718192021

Find the sample standard deviation s of the data: 13, 12, 15, 17, 21.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 500 and standard deviation 25. Find the z-score z of a score of 450.

μ = 500σ = 25x = 450
z =
19.Normal distributionMedium
105 s95.4 sX + Y?

X is normal with mean 60 s and standard deviation 5 s; Y is independent and normal with mean 45 s and standard deviation 4 s. Find the probability P that X + Y is more than 95.4 s. Round z to two decimals.

μX = 60, σX = 5μY = 45, σY = 4X + Y > 95.4 s
P =
20.Normal distributionHard
557085100115130145pointsbottom 30%

The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. Drag the cut-off so the shaded bottom 30% is to the left of it. Find the cut-off x.

μ = 100 pointsσ = 15 points30%
x = points

3Solutions

1.Limits

Answer: L = 0.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(1 + (−1)/x3)/(2 + 6/x2 + 4/x3)

Let x → ∞

L = 1/2 = 0.5

Answer

L = 0.5

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 4.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(3·e3x − 3)/(2x) → 0/0

Second application

9·e3x/2

Substitute x = 0

L = 9·1/2 = 4.5

Answer

L = 4.5
3.Derivatives

Answer: f′(1) = 1.382

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product and chain rule

f′(x) = sin(x) + x·cos(x)

Substitute

f′(1) = 0.8415 + 1·0.5403 = 1.382

Answer

f′(1) = 1.382
4.Derivatives

Answer: x = 2

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 − 15x + 18 = 3·(x2 − 5x + 6)

Solve f′(x) = 0

x = 2 or x = 3

Which one is which

f″(x) = 6x − 15: negative at a maximum, positive at a minimum.

f″(2) = −3, f″(3) = 3
x = 2

Answer

x = 2
5.Integrals

Answer: I = 0.3818

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = cos x dx, v = sin x

Antiderivative

∫x cos x dx = x sin x − ∫sin x dx = x sin x + cos x

Limits

(1·sin 1 + cos 1) − (0 + 1) = 0.3818

Answer

I = 0.3818
6.Integrals

Answer: I = 3.602

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

4.482·(1.25) − 1·2 = 3.602

Answer

I = 3.602
7.Complex numbers

Answer: θ = 2.356 rad

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus

r = √(36 + 36) = 8.485

Argument in radians

θ = 135° = 135·π/180 = 2.356 rad

Exponential form

z = 8.485·ej2.356

Answer

θ = 2.356 rad
8.Complex numbers

Answer: D (3∠140°)

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus and arguments of the roots

|z| = 3
θ = 20°, 80°, 140°, −160°, −100°, −40°

The point

D = 3∠140°

Answer

D (3∠140°)
9.Differential equations

Answer: k = 0.05952 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−25k = 14/62

Solve for k

k = ln(62/14)/25 = 0.05952 min⁻¹

Answer

k = 0.05952 min⁻¹
10.Differential equations

Answer: t = 183.3 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 100 + (−100)·e−t/200

Solve for t

e−t/200 = (100 − 60)/(100 − 0) = 0.4
t = 200·ln(2.5) = 183.3 min

Answer

t = 183.3 min
11.Matrices & determinants

Answer: c21 = −8

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c21 = 4·3 + (−5)·4 = −8

Answer

c21 = −8
12.Matrices & determinants

Answer: x = 0.6471

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−1)·(−5) − 3·(−4) = 17

Replace the x column

det Aₓ = 5·(−5) − 3·(−12) = 11
x = 11/17 = 0.6471

Answer

x = 0.6471
y = 1.882
13.Vectors: dot & cross product

Answer: compb a = 4.533

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = 2·6 + (−1)·(−1) + 5·4 = 33

Length of b

|b| = √(6² + (−1)² + 4²) = 7.28

Scalar projection

compb a = a·b/|b| = 33/7.28 = 4.533

Answer

compb a = 4.533
14.Vectors: dot & cross product

Answer: (a × b)x = −26

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product, component by component

(a × b)x = aybz − azby = 6·(−4) − 2·1 = −26
(a × b)y = azbx − axbz = 2·5 − 3·(−4) = 22
(a × b)z = axby − aybx = 3·1 − 6·5 = −27

Requested component

(a × b)x = −26

Answer

(a × b)x = −26

Check: a × b is perpendicular to both vectors, so its dot product with a and with b is zero.

15.Probability

Answer: N = 35

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(7, 3) = (7·6·5)/(3·2·1) = 35

Answer

N = 35
16.Probability

Answer: E(G) = 2 €

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Net outcomes

G: 10 (p = 0.3), 245 (p = 0.01), −5 (p = 0.69)

Expected value

E(G) = 10·0.3 + 245·0.01 − 5·0.69 = 2 €

Answer

E(G) = 2 €

A positive value means you win money on average.

17.Descriptive statistics

Answer: s = 3.578

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 78/5 = 15.6

Squared deviations

Σ(x − x̄)² = (−2.6)² + (−3.6)² + (−0.6)² + 1.4² + 5.4² = 51.2

Standard deviation

s = √(51.2/4) = 3.578

Answer

s = 3.578
18.Descriptive statistics

Answer: z = −2

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (450 − 500)/25 = −2

Answer

z = −2
19.Normal distribution

Answer: P = 0.9332

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 105 s, σ = √(5² + 4²) = 6.403 s

Standardise

z = (95.4 − 105)/6.403 = −1.5

Upper tail

P = 1 − Φ(−1.5) = 1 − 0.06681 = 0.9332

Answer

P = 0.9332
20.Normal distribution

Answer: x = 92.2 points

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.3

z from the table

z ≈ −0.52

Back to the original units

x = 100 − 0.52·15 = 92.2 points

Answer

x = 92.2 points

ExamProblems · examproblems.com/courses/engineering-mathematics