Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(x2 + 10x) − x).

f(x) = √(x2 + 10x) − xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 5x)/(3x²), with x in radians.

f(x) = (1 − cos 5x)/(3x²)x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = ln(x2 + 5). Find f′(1).

f(x) = ln(x2 + 5)x = 1
f′(1) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = 2x2 + 5x − 2 at x = 2 crosses the y-axis at y = b. Find b.

f(x) = 2x2 + 5x − 2x = 2
b =
5.IntegralsMedium
xy02

Evaluate I = ∫02 e−0.5x dx.

f(x) = e−0.5x[0, 2]
I =
6.IntegralsHard
xy1y = x²eˣ

Evaluate I = ∫₀1 x²·eˣ dx.

∫₀1 x²eˣ dx
I =
7.Complex numbersMedium
ReIm55−5−5θz

Find the argument θ of z = −1 + j8 in degrees, as the principal value between −180° and 180°.

z = −1 + j8
θ = °
8.Complex numbersHard
ReIm22−2−244−4−4z₁z₂

One root of z³ − 12z² + 64z − 128 = 0 is z₁ = 4 + j4. The coefficients are real. Find the real root r.

z₁ = 4 + j4
r =
9.Differential equationsMedium
tyy(0) = 2y(0.5) = ?

Solve y″ + 4y′ + 4y = 0 with y(0) = 2 and y′(0) = 2. Find y(0.5).

y″ + 4y′ + 4y = 0y(0) = 2y′(0) = 2
y(0.5) =
10.Differential equationsHard
ty2y(2) = ?

Solve y′ + y = 2e−3t with y(0) = 1. Find y(2).

y′ + y = 2e−3ty(0) = 1
y(2) =
11.Matrices & determinantsMedium
A =223−20−30−25

Find the determinant det A of the 3×3 matrix A shown.

A = [2 2 3; −2 0 −3; 0 −2 5]
det A =
12.Matrices & determinantsHard
A =2−31−2

Find the larger eigenvalue λ of the matrix A shown.

A = [2 −3; 1 −2]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (4, −1, 5) and b = (2, k, −3) are perpendicular.

a = (4, −1, 5)b = (2, k, −3)
k =
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−10, −40, 60) N acts at point A(1, 3, −3). Coordinates are in metres. Find the x-component Mx of the moment of the force about point O(2, 2, 0).

F = (−10, −40, 60) NA(1, 3, −3) mO(2, 2, 0) m
Mx = N·m
15.ProbabilityMedium
red: 4blue: 7

A bag holds 4 red and 7 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?

4 / 7
P =
16.ProbabilityHard
n = 11, p = 0.3: P(X ≤ 1) = ?k01234567891011

11 components are tested, and each one fails with probability 0.3, independently. What is the probability P that at most one fails?

n = 11p = 0.3
P =
17.Descriptive statisticsMedium
303540455055

Find the sample standard deviation s of the data: 46, 42, 59, 58, 43, 26.

n = 6
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 60 and standard deviation 10. What proportion P of values is above 66?

μ = 60σ = 10x = 66
P =
19.Normal distributionMedium
750 g769.7 gX + Y?

X is normal with mean 250 g and standard deviation 4 g; Y is independent and normal with mean 500 g and standard deviation 9 g. Find the probability P that X + Y is more than 769.7 g. Round z to two decimals.

μX = 250, σX = 4μY = 500, σY = 9X + Y > 769.7 g
P =
20.Normal distributionHard
10 cm0X − Y?

The heights X of men and Y of women in a group are independent and normal: X has mean 180 cm and standard deviation 10 cm, Y has mean 170 cm and standard deviation 12 cm. Find the probability P that X is greater than Y. Round z to two decimals.

μX = 180 cm, σX = 10 cmμY = 170 cm, σY = 12 cm
P =

3Solutions

1.Limits

Answer: L = 5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = 10x/(√(x2 + 10x) + x)

Divide by x

f(x) = 10/(√(1 + 10/x) + 1)

Let x → ∞

L = 10/(1 + 1) = 5

Answer

L = 5
2.Limits

Answer: L = 4.167

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

5·sin 5x/(6x) → 0/0

Second application

25·cos 5x/6

Substitute x = 0

L = 25/6 = 4.167

Answer

L = 4.167
3.Derivatives

Answer: f′(1) = 0.3333

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule for the logarithm

f′(x) = 2x/(x2 + 5)

Substitute

f′(1) = 2/6 = 0.3333

Answer

f′(1) = 0.3333
4.Derivatives

Answer: b = −10

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = 16
f′(x) = 4x + 5 → f′(2) = 13

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 16 − 13·2 = −10

Answer

b = −10
5.Integrals

Answer: I = 1.264

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−0.5x/(−0.5)

Evaluate at the limits

I = (e−1 − 1)/(−0.5) = (0.3679 − 1)/(−0.5) = 1.264

Answer

I = 1.264
6.Integrals

Answer: I = 0.7183

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

2.718·(1) − 1·2 = 0.7183

Answer

I = 0.7183
7.Complex numbers

Answer: θ = 97.13 °

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Quadrant

a = −1, b = 8 → II

Reference angle

α = atan(8/1) = 82.87°

Argument

θ = 180° − α = 97.13°

Answer

θ = 97.13°

In polar form z = 8.062∠97.13°.

8.Complex numbers

Answer: r = 4

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Conjugate pair

z₂ = 4 − j4
(z − z₁)(z − z₂) = z² − 2·4·z + (4² + 4²) = z² − 8z + 32

Factor out the quadratic

z³ − 12z² + 64z − 128 = (z² − 8z + 32)(z − 4)

Real root

r = 4

Answer

r = 4

Check with the sum of the roots: z₁ + z₂ + r = 8 + 4 = 12 = −(−12).

9.Differential equations

Answer: y(0.5) = 1.839

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 2)² = 0 → r = −2

Constants

A = y(0) = 2
y′(0) = B − 2A → B = 2 + 4 = 6

Evaluate

y(0.5) = (2 + 6·0.5)·e−1 = 1.839

Answer

y(0.5) = 1.839
10.Differential equations

Answer: y(2) = 0.2682

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = et
(ety)′ = 2e−2t

General solution

y = 2/(−2)·e−3t + C·e−t = −1·e−3t + C·e−t

Initial condition

1 = −1 + C → C = 2

Evaluate

y(2) = −1·0.002479 + 2·0.1353 = 0.2682

Answer

y(2) = 0.2682
11.Matrices & determinants

Answer: det A = 20

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −6, M₁₂ = −10, M₁₃ = 4

Cofactor expansion

det A = 2·(−6) − 2·(−10) + 3·4 = 20

Answer

det A = 20
12.Matrices & determinants

Answer: λ = 1

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (0)λ + (−1) = 0

Solve

λ = (0 ± √(4))/2 → λ = −1, 1
λ = 1

Answer

λ = 1
13.Vectors: dot & cross product

Answer: k = −7

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = 4·2 + (−1)·k + 5·(−3) = 0
−7 + (−1)·k = 0

Solve for k

k = −(−7)/(−1) = −7

Answer

k = −7
14.Vectors: dot & cross product

Answer: Mx = −60 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (1, 3, −3) − (2, 2, 0) = (−1, 1, −3) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 1·60 − (−3)·(−40) = −60 N·m
(r × F)y = rzFx − rxFz = (−3)·(−10) − (−1)·60 = 90 N·m
(r × F)z = rxFy − ryFx = (−1)·(−40) − 1·(−10) = 50 N·m

Requested component

Mx = −60 N·m

Answer

Mx = −60 N·m
15.Probability

Answer: P = 0.1091

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

First and second draw

P = 4/11 · 3/10 = 12/110 = 0.1091

Answer

P = 0.1091
16.Probability

Answer: P = 0.113

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.711 = 0.01977
P(X = 1) = 11·0.3·0.710 = 0.09322

Add them

P = 0.01977 + 0.09322 = 0.113

Answer

P = 0.113
17.Descriptive statistics

Answer: s = 12.14

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 274/6 = 45.67

Squared deviations

Σ(x − x̄)² = 0.3333² + (−3.667)² + 13.33² + 12.33² + (−2.667)² + (−19.67)² = 737.3

Standard deviation

s = √(737.3/5) = 12.14

Answer

s = 12.14
18.Descriptive statistics

Answer: P = 0.2743

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 0.6

Standard normal table

Φ(0.6) = 0.7257
P = 1 − 0.7257 = 0.2743

Answer

P = 0.2743
19.Normal distribution

Answer: P = 0.02275

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 750 g, σ = √(4² + 9²) = 9.849 g

Standardise

z = (769.7 − 750)/9.849 = 2

Upper tail

P = 1 − Φ(2) = 1 − 0.9772 = 0.02275

Answer

P = 0.02275
20.Normal distribution

Answer: P = 0.7389

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the difference

μ = 180 − 170 = 10 cm, σ = 15.62 cm

Standardise

z = (0 − 10)/15.62 = −0.64

Probability

P = 1 − Φ(−0.64) = 0.7389

Answer

P = 0.7389

ExamProblems · examproblems.com/courses/engineering-mathematics