Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (x3 + 4x − 2)/(x3 + x + 3).

f(x) = (x3 + 4x − 2)/(x3 + x + 3)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 ln(1 + x)/sin(2x), with x in radians.

f(x) = ln(1 + x)/sin(2x)x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = x·sin(2x), with x in radians. Find f′(1).

f(x) = x·sin(2x)x = 1 rad
f′(1) =
4.DerivativesHard
xy

Let f(x) = x3 + 6x2 + 4. Find the x-coordinate x of the local maximum.

f(x) = x3 + 6x2 + 4
x =
5.IntegralsMedium
xy28

Evaluate I = ∫28 5/x dx.

f(x) = 5/x[2, 8]
I =
6.IntegralsHard
xyy = 2x2​y = x

Find the area A of the region enclosed by y = 2x2 and y = x.

y = 2x2y = x
A =
7.Complex numbersMedium
ReIm55−5−5θz

Find the argument θ of z = −6 + j8 in degrees, as the principal value between −180° and 180°.

z = −6 + j8
θ = °
8.Complex numbersHard
ReIm0.50.5−0.5−0.511−1−1θz

Find the imaginary part of (−1 + j)⁵.

z = −1 + jn = 5
Im(z⁵) =
9.Differential equationsMedium
tyy(0) = 2y(2) = ?

Solve y″ + 6y′ + 9y = 0 with y(0) = 2 and y′(0) = -1. Find y(2).

y″ + 6y′ + 9y = 0y(0) = 2y′(0) = -1
y(2) =
10.Differential equationsHard
tyK = 5ymax​ = ?

A system obeys y″ + 2y′ + 5y = 25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.

y″ + 2y′ + 5y = 25y(0) = 0y′(0) = 0
ymax =
11.Matrices & determinantsMedium
A =−5−555B =−144−2

Let C = AB for the matrices shown. Find the entry c21 (row 2, column 1).

A = [−5 −5; 5 5]B = [−1 4; 4 −2]
c21 =
12.Matrices & determinantsHard
A =4221

Find the larger eigenvalue λ of the matrix A shown.

A = [4 2; 2 1]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (3, −4, 5) and b = (6, 5, −3).

a = (3, −4, 5)b = (6, 5, −3)
a·b =
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−20, −30, 40) N acts at point A(1, 3, 2). Coordinates are in metres. Find the z-component Mz of the moment of the force about point O(2, 2, 3).

F = (−20, −30, 40) NA(1, 3, 2) mO(2, 2, 3) m
Mz = N·m
15.ProbabilityMedium
xp(x)00.1510.3520.2530.240.05μ = 1.65

For the distribution shown, find the variance Var(X) of X.

x: 0, 1, 2, 3, 4p(x): 0.15, 0.35, 0.25, 0.2, 0.05
Var(X) =
16.ProbabilityHard
n = 8, p = 0.1: P(X ≤ 1) = ?k012345678

8 components are tested, and each one fails with probability 0.1, independently. What is the probability P that at most one fails?

n = 8p = 0.1
P =
17.Descriptive statisticsMedium
1520253035404550

Find the sample standard deviation s of the data: 13, 21, 36, 52, 15.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 10. What proportion P of values is below 85?

μ = 70σ = 10x = 85
P =
19.Normal distributionMedium
452560P = ?

The battery lifetimes are normally distributed with mean 500 h and standard deviation 40 h. What fraction lies between 452 and 560 h? Give P as a decimal.

μ = 500σ = 40x1 = 452x2 = 560
P =
20.Normal distributionHard
35455565758595pointstop 60%

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. Drag the cut-off so the shaded top 60% is to the right of it. Find the cut-off x.

μ = 65 pointsσ = 10 points60%
x = points

3Solutions

1.Limits

Answer: L = 1

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(1 + 4/x2 + (−2)/x3)/(1 + 1/x2 + 3/x3)

Let x → ∞

L = 1/1 = 1

Answer

L = 1

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 0.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

L'Hôpital's rule

L = limx→0 [1/(1 + x)]/[2·cos 2x]

Substitute x = 0

L = 1/2 = 0.5

Answer

L = 0.5
3.Derivatives

Answer: f′(1) = 0.077

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product and chain rule

f′(x) = sin(2x) + 2x·cos(2x)

Substitute

f′(1) = 0.9093 + 2·(−0.4161) = 0.077

Answer

f′(1) = 0.077
4.Derivatives

Answer: x = −4

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 + 12x = 3·(x2 + 4x)

Solve f′(x) = 0

x = −4 or x = 0

Which one is which

f″(x) = 6x + 12: negative at a maximum, positive at a minimum.

f″(−4) = −12, f″(0) = 12
x = −4

Answer

x = −4
5.Integrals

Answer: I = 6.931

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 5·ln x

Evaluate at the limits

I = 5·(ln 8 − ln 2) = 5·ln 4 = 6.931

Answer

I = 6.931
6.Integrals

Answer: A = 0.04167

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = x → x = 0, x = 0.5

Integrate upper minus lower

A = [0.5x2 − 0.6667x3]00.5 = 0.04167

Answer

A = 0.04167
7.Complex numbers

Answer: θ = 126.9 °

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Quadrant

a = −6, b = 8 → II

Reference angle

α = atan(8/6) = 53.13°

Argument

θ = 180° − α = 126.9°

Answer

θ = 126.9°

In polar form z = 10∠126.9°.

8.Complex numbers

Answer: Im(z⁵) = −4

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Powers step by step

z² = (−1 + j)(−1 + j) = −j2
z³ = (−j2)(−1 + j) = 2 + j2
z⁴ = (2 + j2)(−1 + j) = −4
z⁵ = (−4)(−1 + j) = 4 − j4

Check with De Moivre

z = 1.414∠135° → z⁵ = 5.657∠−45°
Im(z⁵) = −4

Answer

Im(z⁵) = −4
9.Differential equations

Answer: y(2) = 0.02975

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 3)² = 0 → r = −3

Constants

A = y(0) = 2
y′(0) = B − 3A → B = -1 + 6 = 5

Evaluate

y(2) = (2 + 5·2)·e−6 = 0.02975

Answer

y(2) = 0.02975
10.Differential equations

Answer: ymax = 6.039

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −1 ± 2j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −1A + 2B = 0 → B = −2.5

Peak

t = π/2 = 1.571
ymax = 5·(1 + e−1·π/2) = 6.039

Answer

ymax = 6.039
11.Matrices & determinants

Answer: c21 = 15

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c21 = 5·(−1) + 5·4 = 15

Answer

c21 = 15
12.Matrices & determinants

Answer: λ = 5

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (5)λ + (0) = 0

Solve

λ = (5 ± √(25))/2 → λ = 0, 5
λ = 5

Answer

λ = 5
13.Vectors: dot & cross product

Answer: a·b = −17

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = 3·6 + (−4)·5 + 5·(−3) = 18 + (−20) + (−15) = −17

Answer

a·b = −17

Negative: the angle between the vectors is more than 90°.

14.Vectors: dot & cross product

Answer: Mz = 50 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (1, 3, 2) − (2, 2, 3) = (−1, 1, −1) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 1·40 − (−1)·(−30) = 10 N·m
(r × F)y = rzFx − rxFz = (−1)·(−20) − (−1)·40 = 60 N·m
(r × F)z = rxFy − ryFx = (−1)·(−30) − 1·(−20) = 50 N·m

Requested component

Mz = 50 N·m

Answer

Mz = 50 N·m
15.Probability

Answer: Var(X) = 1.227

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.15 + 1·0.35 + 2·0.25 + 3·0.2 + 4·0.05 = 1.65

Mean of the squares

E(X²) = 0·0.15 + 1·0.35 + 4·0.25 + 9·0.2 + 16·0.05 = 3.95

Variance

Var(X) = 3.95 − 1.65² = 1.227

Answer

Var(X) = 1.227
16.Probability

Answer: P = 0.8131

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.98 = 0.4305
P(X = 1) = 8·0.1·0.97 = 0.3826

Add them

P = 0.4305 + 0.3826 = 0.8131

Answer

P = 0.8131
17.Descriptive statistics

Answer: s = 16.44

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 137/5 = 27.4

Squared deviations

Σ(x − x̄)² = (−14.4)² + (−6.4)² + 8.6² + 24.6² + (−12.4)² = 1081

Standard deviation

s = √(1081/4) = 16.44

Answer

s = 16.44
18.Descriptive statistics

Answer: P = 0.9332

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 1.5

Standard normal table

Φ(1.5) = 0.9332
P = 0.9332

Answer

P = 0.9332
19.Normal distribution

Answer: P = 0.8181

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (452 − 500)/40 = −1.2
z₂ = (560 − 500)/40 = 1.5

Area between

P = Φ(1.5) − Φ(−1.2) = 0.9332 − 0.1151 = 0.8181

Answer

P = 0.8181
20.Normal distribution

Answer: x = 62.5 points

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.4

z from the table

z ≈ −0.25

Back to the original units

x = 65 − 0.25·10 = 62.5 points

Answer

x = 62.5 points

ExamProblems · examproblems.com/courses/engineering-mathematics