Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (−x3 + 5x − 6)/(5x3 + x + 8).
f(x) = (−x3 + 5x − 6)/(5x3 + x + 8)x → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (1 − cos 3x)/(x²), with x in radians.
f(x) = (1 − cos 3x)/(x²)x → 0
L =
3.DerivativesMedium
Let f(x) = ln(2x2 + 5). Find f′(1).
f(x) = ln(2x2 + 5)x = 1
f′(1) =
4.DerivativesHard
Let f(x) = x3 − 4.5x2 + 6x + 3. Find the x-coordinate x of the local minimum.
f(x) = x3 − 4.5x2 + 6x + 3
x =
5.IntegralsMedium
Evaluate I = ∫02 e2x dx.
f(x) = e2x[0, 2]
I =
6.IntegralsHard
The region between the line y = 2x and the parabola y = 2x² is rotated about the x-axis. Find the volume V of the solid.
y = 2xy = 2x²
V =
7.Complex numbersMedium
Find the argument θ of z = −3 − j3 in degrees, as the principal value between −180° and 180°.
z = −3 − j3
θ = °
8.Complex numbersHard
Exactly one of the points A–D is a root of z⁴ = 16∠−90°. Click it.
w = 16∠−90°n = 4
1A (2∠−90°)
2B (2∠−157.5°)
3C (2∠157.5°)
4D (3.6∠−157.5°)
9.Differential equationsMedium
Solve y″ + 8y′ + 16y = 0 with y(0) = 1 and y′(0) = 4. Find y(0.5).
y″ + 8y′ + 16y = 0y(0) = 1y′(0) = 4
y(0.5) =
10.Differential equationsHard
A tank holds 400 L of water in which 5 kg of salt is dissolved. Brine with 0.05 kg of salt per litre flows in at 4 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 25 min?
V = 400 Lm0 = 5 kgc = 0.05 kg/Lr = 4 L/min
m = kg
11.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c21 (row 2, column 1).
A = [−5 −3; 3 −3]B = [−2 −6; −1 2]
c21 =
12.Matrices & determinantsHard
Solve the system 3x − 5y = −10 and −2x + 5y = −11. Find x.
3x − 5y = −10−2x + 5y = −11
x =
13.Vectors: dot & cross productMedium
Find the angle θ between the vectors a = (3, −1, −5) and b = (5, 2, −2), in degrees.
a = (3, −1, −5)b = (5, 2, −2)
θ = °
14.Vectors: dot & cross productHard
The unit vector n̂ is perpendicular to both a = (−4, −5, −5) and b = (−2, −1, 4) and has a positive z-component. Find its y-component n̂y.
a = (−4, −5, −5)b = (−2, −1, 4)n̂z > 0
n̂y =
15.ProbabilityMedium
In how many ways N can a committee of 3 people be chosen from a group of 8? The order does not matter.
n = 8k = 3
N =
16.ProbabilityHard
X has the distribution shown, and Y = 10X + 4. Find the standard deviation σY of Y.
Find the sample standard deviation s of the data: 22, 20, 49, 17, 47, 54.
n = 6
s =
18.Descriptive statisticsHard
Exam scores are normally distributed with mean 500 and standard deviation 50. Find the z-score z of a score of 600.
μ = 500σ = 50x = 600
z =
19.Normal distributionMedium
The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. What fraction lies between 178 and 185 cm? Give P as a decimal.
μ = 178σ = 7x1 = 178x2 = 185
P =
20.Normal distributionHard
Hole diameters D are normal with mean 25.02 mm and standard deviation 0.02 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.02 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
hole: μ = 25.02 mm, σ = 0.02 mmshaft: μ = 25 mm, σ = 0.02 mm
P =
3Solutions
1.Limits
Answer: L = −0.2
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Divide by the highest power
(−1 + 5/x2 + (−6)/x3)/(5 + 1/x2 + 8/x3)
Let x → ∞
L = −1/5 = −0.2
Answer
L = −0.2
For equal degrees the limit is the ratio of the leading coefficients.
2.Limits
Answer: L = 4.5
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
3·sin 3x/(2x) → 0/0
Second application
9·cos 3x/2
Substitute x = 0
L = 9/2 = 4.5
Answer
L = 4.5
3.Derivatives
Answer: f′(1) = 0.5714
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule for the logarithm
f′(x) = 4x/(2x2 + 5)
Substitute
f′(1) = 4/7 = 0.5714
Answer
f′(1) = 0.5714
4.Derivatives
Answer: x = 2
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 − 9x + 6 = 3·(x2 − 3x + 2)
Solve f′(x) = 0
x = 1 or x = 2
Which one is which
f″(x) = 6x − 9: negative at a maximum, positive at a minimum.
f″(1) = −3, f″(2) = 3
x = 2
Answer
x = 2
5.Integrals
Answer: I = 26.8
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Antiderivative
F(x) = e2x/2
Evaluate at the limits
I = (e4 − 1)/2 = (54.6 − 1)/2 = 26.8
Answer
I = 26.8
6.Integrals
Answer: V = 1.676
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Intersection points
2x = 2x² → x = 0, x = 1
Washer method
V = π∫₀1 ((2x)² − (2x²)²) dx
Integrate
V = π(4·1³/3 − 4·1⁵/5) = π·0.5333 = 1.676
Answer
V = 1.676
7.Complex numbers
Answer: θ = −135 °
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Quadrant
a = −3, b = −3 → III
Reference angle
α = atan(3/3) = 45°
Argument
θ = −(180° − α) = −135°
Answer
θ = −135°
In polar form z = 4.243∠−135°.
8.Complex numbers
Answer: C (2∠157.5°)
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Modulus and arguments of the roots
|z| = 2
θ = −22.5°, 67.5°, 157.5°, −112.5°
The point
C = 2∠157.5°
Answer
C (2∠157.5°)
9.Differential equations
Answer: y(0.5) = 0.6767
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Double root
(r + 4)² = 0 → r = −4
Constants
A = y(0) = 1
y′(0) = B − 4A → B = 4 + 4 = 8
Evaluate
y(0.5) = (1 + 8·0.5)·e−2 = 0.6767
Answer
y(0.5) = 0.6767
10.Differential equations
Answer: m = 8.318 kg
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Set up the equation
dm/dt = 4·0.05 − (4/400)·m = 0.2 − 0.01·m
Solve
The integrating factor is ert/V; the solution approaches the equilibrium c·V.
m(t) = 20 + (−15)·e−t/100
Substitute t
m(25) = 20 + (−15)·0.7788 = 8.318 kg
Answer
m = 8.318 kg
11.Matrices & determinants
Answer: c21 = −3
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c21 = 3·(−2) + (−3)·(−1) = −3
Answer
c21 = −3
12.Matrices & determinants
Answer: x = −21
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = 3·5 − (−5)·(−2) = 5
Replace the x column
det Aₓ = (−10)·5 − (−5)·(−11) = −105
x = −105/5 = −21
Answer
x = −21
y = −10.6
13.Vectors: dot & cross product
Answer: θ = 47.41 °
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Dot product
a·b = 3·5 + (−1)·2 + (−5)·(−2) = 23
Magnitudes
|a| = √(3² + (−1)² + (−5)²) = 5.916
|b| = √(5² + 2² + (−2)²) = 5.745
Angle
cos θ = 23/(5.916·5.745) = 0.6768
θ = arccos(0.6768) = 47.41°
Answer
θ = 47.41°
14.Vectors: dot & cross product
Answer: n̂y = −0.7111
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Combinations
C(8, 3) = (8·7·6)/(3·2·1) = 56
Answer
N = 56
16.Probability
Answer: σY = 19.08
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Spread of X
μ = 2.6, Var(X) = 3.64, σX = 1.908
Linear change
σY = |10|·1.908 = 19.08
Answer
σY = 19.08
The mean does move: E(Y) = 10·2.6 + 4 = 30.
17.Descriptive statistics
Answer: s = 16.85
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = (600 − 500)/50 = 2
Answer
z = 2
19.Normal distribution
Answer: P = 0.3413
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
z-scores
z₁ = (178 − 178)/7 = 0
z₂ = (185 − 178)/7 = 1
Area between
P = Φ(1) − Φ(0) = 0.8413 − 0.5 = 0.3413
Answer
P = 0.3413
20.Normal distribution
Answer: P = 0.7611
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).