Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(4x2 − 4x) − 2x).

f(x) = √(4x2 − 4x) − 2xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 ln(1 + 3x)/sin(4x), with x in radians.

f(x) = ln(1 + 3x)/sin(4x)x → 0
L =
3.DerivativesMedium
xyx = −1

Let f(x) = (−2x + 3)5. Find f′(−1).

f(x) = (−2x + 3)5x = −1
f′(−1) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = 3x2 − x + 5 at x = 2 crosses the y-axis at y = b. Find b.

f(x) = 3x2 − x + 5x = 2
b =
5.IntegralsMedium
xy1y = x·cos x

Evaluate I = ∫₀1 x·cos x dx (x in radians).

∫₀1 x·cos x dx
I =
6.IntegralsHard
xyy = x2​y = 2x

Find the area A of the region enclosed by y = x2 and y = 2x.

y = x2y = 2x
A =
7.Complex numbersMedium
ReIm22−2−244−4−4z₁z₂w

Given z₁ = 3∠100° and z₂ = 1.5∠45°, find the real part of w = z₁·z₂.

z₁ = 3∠100°z₂ = 1.5∠45°
Re(w) =
8.Complex numbersHard
ReIm0.50.5−0.5−0.511−1−1z₁z₂

One root of z³ − 2z² − 6z − 8 = 0 is z₁ = −1 + j. The coefficients are real. Find the real root r.

z₁ = −1 + j
r =
9.Differential equationsMedium
tyy(0) = 3y(1.5) = ?

Solve y″ + 8y′ + 16y = 0 with y(0) = 3 and y′(0) = 2. Find y(1.5).

y″ + 8y′ + 16y = 0y(0) = 3y′(0) = 2
y(1.5) =
10.Differential equationsHard
tyy(0) = 10y(1) = ?

Solve y″ + y′ + 25.25y = 0 with y(0) = 10 and y′(0) = 0 (released from rest). Find y(1); angles in radians.

y″ + y′ + 25.25y = 0y(0) = 10y′(0) = 0
y(1) =
11.Matrices & determinantsMedium
A =−4−2−41−2−2−22−3

Find the determinant det A of the 3×3 matrix A shown.

A = [−4 −2 −4; 1 −2 −2; −2 2 −3]
det A =
12.Matrices & determinantsHard
A =−65−6−1b =1−12

Solve the system −6x + 5y = 1 and −6x − y = −12. Find x.

−6x + 5y = 1−6x − y = −12
x =
13.Vectors: dot & cross productMedium
xyzab

Find the scalar projection compb a of a = (2, −1, 0) onto b = (1, −3, −5), that is, the component of a in the direction of b.

a = (2, −1, 0)b = (1, −3, −5)
compb a =
14.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (1, 0, −2) and b = (5, −1, 5) and has a positive z-component. Find its x-component n̂x.

a = (1, 0, −2)b = (5, −1, 5)n̂z > 0
n̂x =
15.ProbabilityMedium
xp(x)00.3510.320.35μ = 1

For the distribution shown, find the standard deviation σ of X.

x: 0, 1, 2p(x): 0.35, 0.3, 0.35
σ =
16.ProbabilityHard
n = 6, p = 0.5: P(X ≤ 1) = ?k0123456

6 components are tested, and each one fails with probability 0.5, independently. What is the probability P that at most one fails?

n = 6p = 0.5
P =
17.Descriptive statisticsMedium
253035404550

Find the sample standard deviation s of the data: 28, 54, 35, 54, 21, 48, 26.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 10. What proportion P of values is above 55?

μ = 70σ = 10x = 55
P =
19.Normal distributionMedium
32 min34.5 minX + Y?

X is normal with mean 12 min and standard deviation 1.5 min; Y is independent and normal with mean 20 min and standard deviation 2 min. Find the probability P that X + Y is more than 34.5 min. Round z to two decimals.

μX = 12, σX = 1.5μY = 20, σY = 2X + Y > 34.5 min
P =
20.Normal distributionHard
μ = 32x = ?5%

The delivery times are normally distributed with mean 32 min and standard deviation 6 min. Find the value x below which 5% of them lie (the 5th percentile).

μ = 32σ = 6P = 5%
x = min

3Solutions

1.Limits

Answer: L = −1

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −4x/(√(4x2 − 4x) + 2x)

Divide by x

f(x) = −4/(√(4 + (−4)/x) + 2)

Let x → ∞

L = −4/(2 + 2) = −1

Answer

L = −1
2.Limits

Answer: L = 0.75

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

L'Hôpital's rule

L = limx→0 [3/(1 + 3x)]/[4·cos 4x]

Substitute x = 0

L = 3/4 = 0.75

Answer

L = 0.75
3.Derivatives

Answer: f′(−1) = −6250

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 5·(−2x + 3)4·(−2)

Substitute

f′(−1) = 5·54·(−2) = −6250

Answer

f′(−1) = −6250
4.Derivatives

Answer: b = −7

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = 15
f′(x) = 6x − 1 → f′(2) = 11

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 15 − 11·2 = −7

Answer

b = −7
5.Integrals

Answer: I = 0.3818

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = cos x dx, v = sin x

Antiderivative

∫x cos x dx = x sin x − ∫sin x dx = x sin x + cos x

Limits

(1·sin 1 + cos 1) − (0 + 1) = 0.3818

Answer

I = 0.3818
6.Integrals

Answer: A = 1.333

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

x2 = 2x → x = 0, x = 2

Integrate upper minus lower

A = [x2 − 0.3333x3]02 = 1.333

Answer

A = 1.333
7.Complex numbers

Answer: Re(w) = −3.686

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 3 · 1.5 = 4.5
θ = 100° + 45° = 145°

Rectangular form

Re(w) = 4.5·cos(145°) = −3.686
Im(w) = 4.5·sin(145°) = 2.581
Re(w) = −3.686

Answer

Re(w) = −3.686
8.Complex numbers

Answer: r = 4

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Conjugate pair

z₂ = −1 − j
(z − z₁)(z − z₂) = z² − 2·(−1)·z + ((−1)² + 1²) = z² + 2z + 2

Factor out the quadratic

z³ − 2z² − 6z − 8 = (z² + 2z + 2)(z − 4)

Real root

r = 4

Answer

r = 4

Check with the sum of the roots: z₁ + z₂ + r = −2 + 4 = 2 = −(−2).

9.Differential equations

Answer: y(1.5) = 0.05949

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 4)² = 0 → r = −4

Constants

A = y(0) = 3
y′(0) = B − 4A → B = 2 + 12 = 14

Evaluate

y(1.5) = (3 + 14·1.5)·e−6 = 0.05949

Answer

y(1.5) = 0.05949
10.Differential equations

Answer: y(1) = 1.139

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −0.5 ± 5j

Constants

A = 10, B = 0.5·10/5 = 1

Evaluate

y(1) = e−0.5(10·cos 5 + 1·sin 5) = 1.139

Answer

y(1) = 1.139
11.Matrices & determinants

Answer: det A = −46

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = 10, M₁₂ = −7, M₁₃ = −2

Cofactor expansion

det A = (−4)·10 − (−2)·(−7) + (−4)·(−2) = −46

Answer

det A = −46
12.Matrices & determinants

Answer: x = 1.639

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−6)·(−1) − 5·(−6) = 36

Replace the x column

det Aₓ = 1·(−1) − 5·(−12) = 59
x = 59/36 = 1.639

Answer

x = 1.639
y = 2.167
13.Vectors: dot & cross product

Answer: compb a = 0.8452

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = 2·1 + (−1)·(−3) + 0·(−5) = 5

Length of b

|b| = √(1² + (−3)² + (−5)²) = 5.916

Scalar projection

compb a = a·b/|b| = 5/5.916 = 0.8452

Answer

compb a = 0.8452
14.Vectors: dot & cross product

Answer: n̂x = 0.1319

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = 0·5 − (−2)·(−1) = −2
(a × b)y = azbx − axbz = (−2)·5 − 1·5 = −15
(a × b)z = axby − aybx = 1·(−1) − 0·5 = −1

Normalise

The z-component of a × b is negative, so use −(a × b).

|a × b| = √((−2)² + (−15)² + (−1)²) = 15.17
n̂ = −(−2, −15, −1)/15.17 = (0.1319, 0.9891, 0.06594)
n̂x = 0.1319

Answer

n̂x = 0.1319
15.Probability

Answer: σ = 0.8367

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.35 + 1·0.3 + 2·0.35 = 1

Mean of the squares

E(X²) = 0·0.35 + 1·0.3 + 4·0.35 = 1.7

Variance

Var(X) = 1.7 − 1² = 0.7
σ = √0.7 = 0.8367

Answer

σ = 0.8367
16.Probability

Answer: P = 0.1094

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.56 = 0.01563
P(X = 1) = 6·0.5·0.55 = 0.09375

Add them

P = 0.01563 + 0.09375 = 0.1094

Answer

P = 0.1094
17.Descriptive statistics

Answer: s = 13.87

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 266/7 = 38

Squared deviations

Σ(x − x̄)² = (−10)² + 16² + (−3)² + 16² + (−17)² + 10² + (−12)² = 1154

Standard deviation

s = √(1154/6) = 13.87

Answer

s = 13.87
18.Descriptive statistics

Answer: P = 0.9332

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1.5

Standard normal table

Φ(−1.5) = 0.06681
P = 1 − 0.06681 = 0.9332

Answer

P = 0.9332
19.Normal distribution

Answer: P = 0.1587

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 32 min, σ = √(1.5² + 2²) = 2.5 min

Standardise

z = (34.5 − 32)/2.5 = 1

Upper tail

P = 1 − Φ(1) = 1 − 0.8413 = 0.1587

Answer

P = 0.1587
20.Normal distribution

Answer: x = 22.13 min

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.05 → z = −1.645

Back to x

x = 32 + −1.645·6 = 22.13 min

Answer

x = 22.13 min

ExamProblems · examproblems.com/courses/engineering-mathematics