Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (−5x3 + 2x − 7)/(4x3 + 4x + 6).

f(x) = (−5x3 + 2x − 7)/(4x3 + 4x + 6)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e−0.5x − 1 + 0.5x)/x².

f(x) = (e−0.5x − 1 + 0.5x)/x²x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = ln(3x2 + 5). Find f′(1).

f(x) = ln(3x2 + 5)x = 1
f′(1) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = x2 + 4x at x = 2 crosses the y-axis at y = b. Find b.

f(x) = x2 + 4xx = 2
b =
5.IntegralsMedium
xyπ/3y = x·cos x

Evaluate I = ∫₀π/3 x·cos x dx (x in radians).

∫₀π/3 x·cos x dx
I =
6.IntegralsHard
xy1.667y = 5xy = 3x²

The region between the line y = 5x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.

y = 5xy = 3x²
V =
7.Complex numbersMedium
ReIm22−2−244−4−4θz

Write z = 5∠160° in rectangular form a + jb and give the real part a.

r = 5θ = 160°
a =
8.Complex numbersHard
ReIm11−1−122−2−2θz

Use De Moivre's theorem to find the imaginary part of z³ for z = −√3 + j.

z = −√3 + jn = 3
Im(z³) =
9.Differential equationsMedium
t (min)T (°C)20Ta​16 °C

A can of soda at 6 °C is taken out of the fridge into a room at 24 °C. After 20 min its temperature is 16 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 6 °CTa = 24 °CT(20) = 16 °C
k = min⁻¹
10.Differential equationsHard
t (min)m (kg)t = ?28 kg

A tank holds 200 L of water in which 10 kg of salt is dissolved. Brine with 0.2 kg of salt per litre flows in at 20 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 28 kg of salt?

V = 200 Lm0 = 10 kgc = 0.2 kg/Lr = 20 L/min
t = min
11.Matrices & determinantsMedium
A =−330−5B =14−4−2

Let C = AB for the matrices shown. Find the entry c12 (row 1, column 2).

A = [−3 3; 0 −5]B = [1 4; −4 −2]
c12 =
12.Matrices & determinantsHard
A =41−36b =−512

Solve the system 4x + y = −5 and −3x + 6y = 12. Find x.

4x + y = −5−3x + 6y = 12
x =
13.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (−7, 7, −3) and b = (0, 3, 3).

a = (−7, 7, −3)b = (0, 3, 3)
a·b =
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−30, −60, 50) N acts at point A(−1, 0, −4). Coordinates are in metres. Find the z-component Mz of the moment of the force about the origin O(0, 0, 0).

F = (−30, −60, 50) NA(−1, 0, −4) mO(0, 0, 0) m
Mz = N·m
15.ProbabilityMedium
red: 4blue: 8

A bag holds 4 red and 8 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?

4 / 8
P =
16.ProbabilityHard
n = 12, p = 0.25: P(X ≤ 1) = ?k0123456789101112

12 components are tested, and each one fails with probability 0.25, independently. What is the probability P that at most one fails?

n = 12p = 0.25
P =
17.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 30, 22, 57, 39, 18, 11, 37.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 70 and standard deviation 20. Find the z-score z of a score of 95.

μ = 70σ = 20x = 95
z =
19.Normal distributionMedium
−3−2−10123zshaded area to the right of z = 0.2578

Drag z so that the shaded area under the standard normal curve, to the right of z, is 0.2578. Find z to two decimals.

A = 0.2578
z =
20.Normal distributionHard
157164171178185192199cmbottom 40%

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. Drag the cut-off so the shaded bottom 40% is to the left of it. Find the cut-off x.

μ = 178 cmσ = 7 cm40%
x = cm

3Solutions

1.Limits

Answer: L = −1.25

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(−5 + 2/x2 + (−7)/x3)/(4 + 4/x2 + 6/x3)

Let x → ∞

L = −5/4 = −1.25

Answer

L = −1.25

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 0.125

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(−0.5·e−0.5x + 0.5)/(2x) → 0/0

Second application

0.25·e−0.5x/2

Substitute x = 0

L = 0.25·1/2 = 0.125

Answer

L = 0.125
3.Derivatives

Answer: f′(1) = 0.75

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule for the logarithm

f′(x) = 6x/(3x2 + 5)

Substitute

f′(1) = 6/8 = 0.75

Answer

f′(1) = 0.75
4.Derivatives

Answer: b = −4

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = 12
f′(x) = 2x + 4 → f′(2) = 8

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 12 − 8·2 = −4

Answer

b = −4
5.Integrals

Answer: I = 0.4069

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = cos x dx, v = sin x

Antiderivative

∫x cos x dx = x sin x − ∫sin x dx = x sin x + cos x

Limits

(π/3·sin π/3 + cos π/3) − (0 + 1) = 0.4069

Answer

I = 0.4069
6.Integrals

Answer: V = 48.48

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

5x = 3x² → x = 0, x = 1.667

Washer method

V = π∫₀1.667 ((5x)² − (3x²)²) dx

Integrate

V = π(25·1.667³/3 − 9·1.667⁵/5) = π·15.43 = 48.48

Answer

V = 48.48
7.Complex numbers

Answer: a = −4.698

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 5·cos(160°) = −4.698
b = 5·sin(160°) = 1.71

Rectangular form

z = −4.698 + j1.71
a = −4.698

Answer

a = −4.698
8.Complex numbers

Answer: Im(z³) = 8

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Polar form

z = −√3 + j = 2∠150°

De Moivre

z³ = (2)³∠450° = 8∠90°

Rectangular form

z³ = 8·(cos 90° + j sin 90°) = j8
Im(z³) = 8

Answer

Im(z³) = 8
9.Differential equations

Answer: k = 0.04055 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−20k = -8/-18

Solve for k

k = ln(-18/-8)/20 = 0.04055 min⁻¹

Answer

k = 0.04055 min⁻¹
10.Differential equations

Answer: t = 9.163 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 40 + (−30)·e−t/10

Solve for t

e−t/10 = (40 − 28)/(40 − 10) = 0.4
t = 10·ln(2.5) = 9.163 min

Answer

t = 9.163 min
11.Matrices & determinants

Answer: c12 = −18

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c12 = (−3)·4 + 3·(−2) = −18

Answer

c12 = −18
12.Matrices & determinants

Answer: x = −1.556

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = 4·6 − 1·(−3) = 27

Replace the x column

det Aₓ = (−5)·6 − 1·12 = −42
x = −42/27 = −1.556

Answer

x = −1.556
y = 1.222
13.Vectors: dot & cross product

Answer: a·b = 12

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = (−7)·0 + 7·3 + (−3)·3 = 0 + 21 + (−9) = 12

Answer

a·b = 12

Positive: the angle between the vectors is less than 90°.

14.Vectors: dot & cross product

Answer: Mz = 60 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (−1, 0, −4) − (0, 0, 0) = (−1, 0, −4) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 0·50 − (−4)·(−60) = −240 N·m
(r × F)y = rzFx − rxFz = (−4)·(−30) − (−1)·50 = 170 N·m
(r × F)z = rxFy − ryFx = (−1)·(−60) − 0·(−30) = 60 N·m

Requested component

Mz = 60 N·m

Answer

Mz = 60 N·m
15.Probability

Answer: P = 0.09091

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

First and second draw

P = 4/12 · 3/11 = 12/132 = 0.09091

Answer

P = 0.09091
16.Probability

Answer: P = 0.1584

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.7512 = 0.03168
P(X = 1) = 12·0.25·0.7511 = 0.1267

Add them

P = 0.03168 + 0.1267 = 0.1584

Answer

P = 0.1584
17.Descriptive statistics

Answer: s = 15.41

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 214/7 = 30.57

Squared deviations

Σ(x − x̄)² = (−0.5714)² + (−8.571)² + 26.43² + 8.429² + (−12.57)² + (−19.57)² + 6.429² = 1426

Standard deviation

s = √(1426/6) = 15.41

Answer

s = 15.41
18.Descriptive statistics

Answer: z = 1.25

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (95 − 70)/20 = 1.25

Answer

z = 1.25
19.Normal distribution

Answer: z = 0.65

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left of z

Φ(z) = 1 − 0.2578 = 0.7422

Read the z-table backwards

Find 0.7422 inside the table and read off z.

z = 0.65

Answer

z = 0.65
20.Normal distribution

Answer: x = 176.3 cm

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.4

z from the table

z ≈ −0.25

Back to the original units

x = 178 − 0.25·7 = 176.3 cm

Answer

x = 176.3 cm

ExamProblems · examproblems.com/courses/engineering-mathematics