Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (1 − 1/x)2x. Give a decimal value.
f(x) = (1 − 1/x)2xx → ∞
L =
2.LimitsHard
Find the limit L = limx→0 ln(1 + 4x)/sin(5x), with x in radians.
f(x) = ln(1 + 4x)/sin(5x)x → 0
L =
3.DerivativesMedium
Let f(x) = x·e0.5x. Find f′(1).
f(x) = x·e0.5xx = 1
f′(1) =
4.DerivativesHard
Let f(x) = x3 − 3x + 4. Find the x-coordinate x of the local minimum.
f(x) = x3 − 3x + 4
x =
5.IntegralsMedium
The region under y = x from x = 0 to x = 3 is rotated about the x-axis. Find the volume V of the solid (a cone).
y = x0 ≤ x ≤ 3
V =
6.IntegralsHard
Find the area A of the region enclosed by y = 2x2 and y = 3x.
y = 2x2y = 3x
A =
7.Complex numbersMedium
Write z = 2∠110° in rectangular form a + jb and give the real part a.
r = 2θ = 110°
a =
8.Complex numbersHard
Use De Moivre's theorem to find the real part of z⁸ for z = 2 + j2.
z = 2 + j2n = 8
Re(z⁸) =
9.Differential equationsMedium
A cup of coffee at 84 °C is left in a room at 21 °C. After 9 min its temperature is 65 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 75 °C?
T0 = 84 °CTa = 21 °CT(9) = 65 °CT = 75 °C
t = min
10.Differential equationsHard
A tank holds 100 L of pure water. Brine with 0.25 kg of salt per litre flows in at 4 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 13 kg of salt?
V = 100 Lm0 = 0 kgc = 0.25 kg/Lr = 4 L/min
t = min
11.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c11 (row 1, column 1).
A = [3 6; −1 −2]B = [5 4; −6 3]
c11 =
12.Matrices & determinantsHard
Find the larger eigenvalue λ of the matrix A shown.
A = [3 −3; −7 −1]
λ =
13.Vectors: dot & cross productMedium
A constant force F = (−5, 20, 30) N acts on an object while it moves in a straight line from point A(−2, −4, −4) to point B(−1, −2, −2). Coordinates are in metres. Find the work W done by the force.
F = (−5, 20, 30) NA(−2, −4, −4) mB(−1, −2, −2) m
W = J
14.Vectors: dot & cross productHard
The unit vector n̂ is perpendicular to both a = (5, 5, 3) and b = (1, 5, −1) and has a positive z-component. Find its y-component n̂y.
a = (5, 5, 3)b = (1, 5, −1)n̂z > 0
n̂y =
15.ProbabilityMedium
For the distribution shown, find the variance Var(X) of X.
x: 0, 2, 4, 6p(x): 0.1, 0.3, 0.25, 0.35
Var(X) =
16.ProbabilityHard
A test has 12 multiple-choice questions. A student who guesses gets each one right with probability 0.4, independently. What is the probability P of exactly 5 correct answers?
n = 12p = 0.4k = 5
P =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 23, 43, 22, 49, 44.
n = 5
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 70 and standard deviation 5. What proportion P of values is above 73?
μ = 70σ = 5x = 73
P =
19.Normal distributionMedium
The masses of bags of cement are independent and normal with mean 25 kg and standard deviation 0.5 kg. Find the probability P that the total mass of 16 of them exceeds 401 kg. Round z to two decimals.
μ = 25 kgσ = 0.5 kgn = 16> 401 kg
P =
20.Normal distributionHard
The mass X of a product from line 1 and Y from line 2 are independent and normal: X has mean 500 g and standard deviation 8 g, Y has mean 490 g and standard deviation 6 g. Find the probability P that X is greater than Y. Round z to two decimals.
μX = 500 g, σX = 8 gμY = 490 g, σY = 6 g
P =
3Solutions
1.Limits
Answer: L = 0.1353
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Take the logarithm
ln L = limx→∞ 2·x·ln(1 − 1/x)
Evaluate
ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.
ln L = 2·(−1) = −2
Undo the logarithm
L = e−2 = 0.1353
Answer
L = 0.1353
2.Limits
Answer: L = 0.8
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
L'Hôpital's rule
L = limx→0 [4/(1 + 4x)]/[5·cos 5x]
Substitute x = 0
L = 4/5 = 0.8
Answer
L = 0.8
3.Derivatives
Answer: f′(1) = 2.473
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Product rule
f′(x) = u′v + uv′ = e0.5x·(1 + 0.5·x)
Substitute
f′(1) = 1.649·(1 + 0.5) = 2.473
Answer
f′(1) = 2.473
4.Derivatives
Answer: x = 1
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 − 3 = 3·(x2 − 1)
Solve f′(x) = 0
x = −1 or x = 1
Which one is which
f″(x) = 6x: negative at a maximum, positive at a minimum.
f″(−1) = −6, f″(1) = 6
x = 1
Answer
x = 1
5.Integrals
Answer: V = 28.27
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀3 1x² dx
Integrate
V = π·1·3³/3 = 28.27
Answer
V = 28.27
Check: a cone of radius 3 and height 3 has (1/3)πr²h = 28.27.
6.Integrals
Answer: A = 1.125
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Intersection points
2x2 = 3x → x = 0, x = 1.5
Integrate upper minus lower
A = [1.5x2 − 0.6667x3]01.5 = 1.125
Answer
A = 1.125
7.Complex numbers
Answer: a = −0.684
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Components
a = 2·cos(110°) = −0.684
b = 2·sin(110°) = 1.879
Rectangular form
z = −0.684 + j1.879
a = −0.684
Answer
a = −0.684
8.Complex numbers
Answer: Re(z⁸) = 4096
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Polar form
z = 2 + j2 = 2√2∠45°
De Moivre
z⁸ = (2√2)⁸∠360° = 4096∠0°
Rectangular form
z⁸ = 4096·(cos 0° + j sin 0°) = 4096
Re(z⁸) = 4096
Answer
Re(z⁸) = 4096
9.Differential equations
Answer: t = 3.865 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Cooling constant
k = ln(63/44)/9 = 0.03988 min⁻¹
Time to reach the target
t = ln(63/54)/0.03988 = 3.865 min
Answer
t = 3.865 min
10.Differential equations
Answer: t = 18.35 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Result
m(t) = 25 + (−25)·e−t/25
Solve for t
e−t/25 = (25 − 13)/(25 − 0) = 0.48
t = 25·ln(2.083) = 18.35 min
Answer
t = 18.35 min
11.Matrices & determinants
Answer: c11 = −21
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c11 = 3·5 + 6·(−6) = −21
Answer
c11 = −21
12.Matrices & determinants
Answer: λ = 6
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Characteristic equation
λ² − (2)λ + (−24) = 0
Solve
λ = (2 ± √(100))/2 → λ = −4, 6
λ = 6
Answer
λ = 6
13.Vectors: dot & cross product
Answer: W = 95 J
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Displacement
d = B − A = (−1, −2, −2) − (−2, −4, −4) = (1, 2, 2) m
Work
W = F·d = (−5)·1 + 20·2 + 30·2 = 95 J
Answer
W = 95 J
14.Vectors: dot & cross product
Answer: n̂y = 0.2722
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Mean
μ = 0·0.1 + 2·0.3 + 4·0.25 + 6·0.35 = 3.7
Mean of the squares
E(X²) = 0·0.1 + 4·0.3 + 16·0.25 + 36·0.35 = 17.8
Variance
Var(X) = 17.8 − 3.7² = 4.11
Answer
Var(X) = 4.11
16.Probability
Answer: P = 0.227
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 0.6
Standard normal table
Φ(0.6) = 0.7257
P = 1 − 0.7257 = 0.2743
Answer
P = 0.2743
19.Normal distribution
Answer: P = 0.3085
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Distribution of the total
μT = 400 kg, σT = 0.5·√16 = 2 kg
Standardise
z = (401 − 400)/2 = 0.5
Probability
P = 1 − Φ(0.5) = 0.3085
Answer
P = 0.3085
20.Normal distribution
Answer: P = 0.8413
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).