Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
eventno eventtotaltreatment14536550abcontrol41779820cd

Practice exercise (made-up values, not clinical guidance). In a randomised trial, 550 patients received a new treatment and 820 received the control treatment. The table shows how many in each group had the outcome (an unwanted event such as a stroke). Find the number needed to treat NNT to prevent one event. Round up to a whole number of patients.

treatment: 14/550control: 41/820
NNT =
2.Evidence-based practice statisticsHard
CER11%EER?RRR 50%

Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 50% in relative terms (RRR = 50%). In a patient group the risk without treatment (CER) is 11% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.

RRR = 50%CER = 11%
NNT =
3.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 14, 29, 58, 37, 34, 49, 34.

n = 7
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 8. What proportion P of values is above 116?

μ = 100σ = 8x = 116
P =
5.Confidence intervalsMedium
n = 13, s = 2.5LUx̄ = 97.5E = ?90%

A sample of 13 items has mean 97.5 and standard deviation s = 2.5. The population is roughly normal. Find the margin of error E of a 90% confidence interval for the mean.

n = 13x̄ = 97.5s = 2.590%t(12) = 1.782
E =
6.Confidence intervalsHard
σ = 3, n = ?x̄ − Ex̄ + Ex̄E = 0.595%

The population standard deviation is 3. How large a sample n do you need so that a 95% confidence interval for the mean has a margin of error of at most 0.5?

σ = 3E = 0.595%
n =
7.Hypothesis tests & confidence intervalsMedium
t −2.06402.064

A sample of 25 students has a mean score of 82.2 and a sample standard deviation of 15. Find the test statistic t for H₀: μ = 75.

μ₀ = 75x̄ = 82.2s = 15n = 25
t =
8.Hypothesis tests & confidence intervalsHard
−1.961.96z = ?

In a trial, 90 of 200 patients on treatment A recover, and 104 of 200 patients on treatment B. Using the pooled proportion, find the test statistic z for H₀: p₁ = p₂.

x₁ = 90n₁ = 200x₂ = 104n₂ = 200
z =

3Solutions

1.Evidence-based practice statistics

Answer: NNT = 41

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Event rates

EER = 14/550 = 0.02545
CER = 41/820 = 0.05

Number needed to treat

ARR = 0.05 − 0.02545 = 0.02455
NNT = 1/0.02455 = 40.74 → 41

Answer

NNT = 41

Treating 41 patients prevents about one event.

2.Evidence-based practice statistics

Answer: NNT = 19

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Absolute risk reduction

ARR = 0.11·0.5 = 0.055

Number needed to treat

NNT = 1/0.055 = 18.18 → 19

Answer

NNT = 19

The same relative effect gives a smaller NNT when the baseline risk is higher.

3.Descriptive statistics

Answer: s = 14.11

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 255/7 = 36.43

Squared deviations

Σ(x − x̄)² = (−22.43)² + (−7.429)² + 21.57² + 0.5714² + (−2.429)² + 12.57² + (−2.429)² = 1194

Standard deviation

s = √(1194/6) = 14.11

Answer

s = 14.11
4.Descriptive statistics

Answer: P = 0.02275

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 2

Standard normal table

Φ(2) = 0.9772
P = 1 − 0.9772 = 0.02275

Answer

P = 0.02275
5.Confidence intervals

Answer: E = 1.236

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Critical value

df = n − 1 = 12, t = 1.782

Margin of error

E = 1.782·2.5/√13 = 1.236

Answer

E = 1.236
6.Confidence intervals

Answer: n = 139

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Solve for n

n = (1.96·3/0.5)² = 138.3

Round up

A sample size is a whole number, and rounding down would make the margin too large.

n = 139

Answer

n = 139
7.Hypothesis tests & confidence intervals

Answer: t = 2.4

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 15/√25 = 15/5 = 3

Test statistic

t = (82.2 − 75)/3 = 2.4

Answer

t = 2.4
t0.025; df = 24 = 2.064

|t| > 2.064, so H₀ is rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: z = −1.401

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Sample proportions

p̂₁ = 90/200 = 0.45
p̂₂ = 104/200 = 0.52
p̂ = 194/400 = 0.485

Standard error under H₀

SE = √(0.485·0.515·(1/200 + 1/200)) = 0.04998

Test statistic

z = (0.45 − 0.52)/0.04998 = −1.401

Answer

z = −1.401

|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).

ExamProblems · examproblems.com/courses/evidence-based-practice