In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Evidence-based practice statistics
Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time
Method
Draw the 2 × 2 table and label a, b, c and d before you calculate.
Read sensitivity and specificity down the columns, predictive values along the rows.
For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
For a likelihood ratio, convert the probability to odds, multiply, and convert back.
For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Confidence intervals
σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up
Method
Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
Find the critical value for the confidence level.
Margin of error: E = critical value × standard deviation/√n.
Interval: x̄ ± E.
Hypothesis tests & confidence intervals
z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n
Method
State H₀ and H₁ and decide whether the test is one- or two-sided.
Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
Compare with the critical value, or find the p-value.
Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.
2Practice problems
1.Evidence-based practice statisticsMedium
Practice exercise (made-up values, not clinical guidance). A test has a sensitivity of 82% and a specificity of 87%. Find the positive likelihood ratio LR+. Round to two decimal places.
Se = 82%Sp = 87%
LR+ =
2.Evidence-based practice statisticsHard
Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 24% in relative terms (RRR = 24%). In a patient group the risk without treatment (CER) is 16% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.
RRR = 24%CER = 16%
NNT =
3.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 39, 56, 17, 44, 44, 21.
n = 6
s =
4.Descriptive statisticsHard
A quantity is normally distributed with mean 60 and standard deviation 10. What proportion P of values is below 80?
μ = 60σ = 10x = 80
P =
5.Confidence intervalsMedium
The battery life of two phone models is compared. Model 1: 100 phones, mean 95.5 h, known standard deviation 12 h. Model 2: 50 phones, mean 110.5 h, known standard deviation 19 h. Find the upper limit of the 95% confidence interval for μ₁ − μ₂.
A pilot study suggests that about 0.15 of products are defective. How many products n must be inspected so that a 99% confidence interval for the proportion has a margin of error of at most 0.05?
p ≈ 0.15E = 0.0599%
n =
7.Hypothesis tests & confidence intervalsMedium
9 employees take a typing test before and after a training course. For each person the difference d = after − before (words per minute) is recorded. The mean difference is 10.7 and the standard deviation of the differences is 10.7. Find the paired test statistic t for H₀: μd = 0.
n = 9d̄ = 10.7sd = 10.7
t =
8.Hypothesis tests & confidence intervalsHard
How large must a sample be so that the 95% confidence interval for a mean has a margin of error of at most 2.5? The standard deviation is 8. Find the smallest sample size n.
σ = 8E = 2.595%
n =
3Solutions
1.Evidence-based practice statistics
Answer: LR+ = 6.31
Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.
Positive likelihood ratio
LR+ = 0.82/(1 − 0.87) = 6.308 ≈ 6.31
Answer
LR+ = 6.31
2.Evidence-based practice statistics
Answer: NNT = 27
Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.
Absolute risk reduction
ARR = 0.16·0.24 = 0.0384
Number needed to treat
NNT = 1/0.0384 = 26.04 → 27
Answer
NNT = 27
The same relative effect gives a smaller NNT when the baseline risk is higher.
3.Descriptive statistics
Answer: s = 14.96
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 2
Standard normal table
Φ(2) = 0.9772
P = 0.9772
Answer
P = 0.9772
5.Confidence intervals
Answer: upper limit = −9.232 h
Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.
Point estimate
x̄₁ − x̄₂ = 95.5 − 110.5 = −15
Standard error
SE = √(12²/100 + 19²/50) = 2.943
Margin of error
E = 1.96·2.943 = 5.768
Interval
−15 ± 5.768 → [−20.77, −9.232]
Answer
upper limit = −9.232 h
The interval does not contain 0, so the means differ significantly.
6.Confidence intervals
Answer: n = 339
Confidence interval for a proportion: p̂ ± z·√(p̂(1 − p̂)/n), where p̂ = x/n. To reach a margin E you need n ≥ z²·p(1 − p)/E², rounded up; without a prior estimate use p = 0.5, which gives the largest n.
Solve for n
n = 2.576²·0.15·0.85/0.05² = 338.4
Round up
n = 339
Answer
n = 339
7.Hypothesis tests & confidence intervals
Answer: t = 3
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Standard error of the mean difference
SE = 10.7/√9 = 3.567
Test statistic
t = 10.7/3.567 = 3
Answer
t = 3
With df = 8, the two-sided 5% critical value is 2.306; |t| is larger, so H₀ is rejected.
8.Hypothesis tests & confidence intervals
Answer: n = 40
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).