In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Evidence-based practice statistics
Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time
Method
Draw the 2 × 2 table and label a, b, c and d before you calculate.
Read sensitivity and specificity down the columns, predictive values along the rows.
For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
For a likelihood ratio, convert the probability to odds, multiply, and convert back.
For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Confidence intervals
σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up
Method
Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
Find the critical value for the confidence level.
Margin of error: E = critical value × standard deviation/√n.
Interval: x̄ ± E.
Hypothesis tests & confidence intervals
z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n
Method
State H₀ and H₁ and decide whether the test is one- or two-sided.
Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
Compare with the critical value, or find the p-value.
Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.
2Practice problems
1.Evidence-based practice statisticsMedium
Practice exercise (made-up values, not clinical guidance). A test has a sensitivity of 82% and a specificity of 88%. Find the negative likelihood ratio LR−. Round to two decimal places.
Se = 82%Sp = 88%
LR− =
2.Evidence-based practice statisticsHard
Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 14% in relative terms (RRR = 14%). In a patient group the risk without treatment (CER) is 8% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.
RRR = 14%CER = 8%
NNT =
3.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 34, 22, 15, 10, 43.
n = 5
s =
4.Descriptive statisticsHard
A quantity is normally distributed with mean 50 and standard deviation 20. What proportion P of values is below 30?
μ = 50σ = 20x = 30
P =
5.Confidence intervalsMedium
A sample of 9 items has mean 69 and standard deviation s = 19.5. The population is roughly normal. Find the lower limit of the 90% confidence interval for the mean.
n = 9x̄ = 69s = 19.590%t(8) = 1.86
lower limit =
6.Confidence intervalsHard
The population standard deviation is 21. How large a sample n do you need so that a 90% confidence interval for the mean has a margin of error of at most 2?
σ = 21E = 290%
n =
7.Hypothesis tests & confidence intervalsMedium
A sample of 25 students has a mean score of 507 and a sample standard deviation of 12. Find the test statistic t for H₀: μ = 500.
μ₀ = 500x̄ = 507s = 12n = 25
t =
8.Hypothesis tests & confidence intervalsHard
A sample of 64 measurements has mean 102.8. The population standard deviation is 10. Find the lower limit L of the 99% confidence interval for the mean.
x̄ = 102.8σ = 10n = 6499%
L =
3Solutions
1.Evidence-based practice statistics
Answer: LR− = 0.2
Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.
Negative likelihood ratio
LR− = (1 − 0.82)/0.88 = 0.2045 ≈ 0.2
Answer
LR− = 0.2
2.Evidence-based practice statistics
Answer: NNT = 90
Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.
Absolute risk reduction
ARR = 0.08·0.14 = 0.0112
Number needed to treat
NNT = 1/0.0112 = 89.29 → 90
Answer
NNT = 90
The same relative effect gives a smaller NNT when the baseline risk is higher.
3.Descriptive statistics
Answer: s = 13.59
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = −1
Standard normal table
Φ(−1) = 0.1587
P = 0.1587
Answer
P = 0.1587
5.Confidence intervals
Answer: lower limit = 56.91
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Critical value
df = n − 1 = 8, t = 1.86
Margin of error
E = 1.86·19.5/√9 = 12.09
Interval
69 ± 12.09 → [56.91, 81.09]
Answer
lower limit = 56.91
6.Confidence intervals
Answer: n = 299
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Solve for n
n = (1.645·21/2)² = 298.3
Round up
A sample size is a whole number, and rounding down would make the margin too large.
n = 299
Answer
n = 299
7.Hypothesis tests & confidence intervals
Answer: t = 2.917
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Standard error
SE = 12/√25 = 12/5 = 2.4
Test statistic
t = (507 − 500)/2.4 = 2.917
Answer
t = 2.917
t0.025; df = 24 = 2.064
|t| > 2.064, so H₀ is rejected at the 5% level (two-sided).
8.Hypothesis tests & confidence intervals
Answer: L = 99.58
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).