Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
testdisease presentdisease absenttotalpositive16047207abnegative40423463cdtotal200470670

Practice exercise (made-up values, not clinical guidance). A new test was compared with the reference standard in a study (see the 2 × 2 table). Find the negative likelihood ratio LR−. Round to two decimal places.

a = 160b = 47c = 40d = 423
LR− =
2.Evidence-based practice statisticsHard
p (%)NPV (%)30%NPV = ?100

Practice exercise (made-up values, not clinical guidance). A screening test has a sensitivity of 92% and a specificity of 82%. It is used in a population where the prevalence is 30%. Find the negative predictive value NPV as a percentage. Round to one decimal place.

Se = 92%Sp = 82%p = 30%
NPV = %
3.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 27, 26, 15, 59, 13, 37, 44.

n = 7
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 15. What proportion P of values is above 109?

μ = 100σ = 15x = 109
P =
5.Confidence intervalsMedium
μ₁ − μ₂0LU = ?x̄₁ − x̄₂E95%

The battery life of two phone models is compared. Model 1: 100 phones, mean 76.5 h, known standard deviation 6 h. Model 2: 50 phones, mean 87 h, known standard deviation 4 h. Find the upper limit of the 95% confidence interval for μ₁ − μ₂.

n₁ = 100x̄₁ = 76.5 hσ₁ = 6 hn₂ = 50x̄₂ = 87 hσ₂ = 4 h95%
upper limit = h
6.Confidence intervalsHard
μ₁ − μ₂, t(19) = 2.0930LU = ?x̄₁ − x̄₂E95%

Two fertilisers are tested. Plot group 1: 5 plots, mean yield 44 kg, standard deviation 7.5 kg. Plot group 2: 16 plots, mean 37.5 kg, standard deviation 1 kg. Assume equal variances (pooled t, df = n₁ + n₂ − 2). Find the upper limit of the 95% confidence interval for μ₁ − μ₂.

n₁ = 5x̄₁ = 44s₁ = 7.5n₂ = 16x̄₂ = 37.5s₂ = 195%t(19) = 2.093
upper limit = kg
7.Hypothesis tests & confidence intervalsMedium
t −2.01102.011

A sample of 49 students has a mean score of 101.2 and a sample standard deviation of 12. Find the test statistic t for H₀: μ = 100.

μ₀ = 100x̄ = 101.2s = 12n = 49
t =
8.Hypothesis tests & confidence intervalsHard
H₀H₁μ₀x̄cμ₀ + 5α = 0.05βσ = 19, power 90%, n = ?

A one-sided z test at α = 0.05 must detect a shift of the mean of 5 units with a power of 90%. The standard deviation is 19. Find the minimum sample size n.

α = 0.05power = 90%δ = 5σ = 19zα = 1.645zβ = 1.282
n =

3Solutions

1.Evidence-based practice statistics

Answer: LR− = 0.22

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Sensitivity and specificity

Se = 160/200 = 0.8
Sp = 423/470 = 0.9

Negative likelihood ratio

LR− = (1 − 0.8)/0.9 = 0.2222 ≈ 0.22

Answer

LR− = 0.22
2.Evidence-based practice statistics

Answer: NPV = 96 %

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

True and false negatives (per person)

Sp·(1 − p) = 0.82·0.7 = 0.574
(1 − Se)·p = 0.08·0.3 = 0.024

Negative predictive value

NPV = 0.574/(0.574 + 0.024) = 0.9599 ≈ 96%

Answer

NPV = 96%
3.Descriptive statistics

Answer: s = 16.37

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 221/7 = 31.57

Squared deviations

Σ(x − x̄)² = (−4.571)² + (−5.571)² + (−16.57)² + 27.43² + (−18.57)² + 5.429² + 12.43² = 1608

Standard deviation

s = √(1608/6) = 16.37

Answer

s = 16.37
4.Descriptive statistics

Answer: P = 0.2743

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 0.6

Standard normal table

Φ(0.6) = 0.7257
P = 1 − 0.7257 = 0.2743

Answer

P = 0.2743
5.Confidence intervals

Answer: upper limit = −8.884 h

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Point estimate

x̄₁ − x̄₂ = 76.5 − 87 = −10.5

Standard error

SE = √(6²/100 + 4²/50) = 0.8246

Margin of error

E = 1.96·0.8246 = 1.616

Interval

−10.5 ± 1.616 → [−12.12, −8.884]

Answer

upper limit = −8.884 h

The interval does not contain 0, so the means differ significantly.

6.Confidence intervals

Answer: upper limit = 10.31 kg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Pooled standard deviation

sp² = (4·7.5² + 15·1²)/19 = 12.63
sp = 3.554

Margin of error

E = 2.093·3.554·√(1/5 + 1/16) = 3.811

Interval

6.5 ± 3.811 → [2.689, 10.31]

Answer

upper limit = 10.31 kg
7.Hypothesis tests & confidence intervals

Answer: t = 0.7

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 12/√49 = 12/7 = 1.714

Test statistic

t = (101.2 − 100)/1.714 = 0.7

Answer

t = 0.7
t0.025; df = 48 = 2.011

|t| < 2.011, so H₀ is not rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: n = 124

Sample size for a test: to detect a true shift δ with power 1 − β in a one-sided z test at level α, the standard error must satisfy δ = (z_α + z_β)·σ/√n, so n = ((z_α + z_β)·σ/δ)², rounded up.

Solve for n

n = ((1.645 + 1.282)·19/5)² = 123.7

Round up

n = 124

Answer

n = 124

ExamProblems · examproblems.com/courses/evidence-based-practice