Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
testdisease presentdisease absenttotalpositive223392615abnegative67728795cdtotal29011201410

Practice exercise (made-up values, not clinical guidance). A new test was compared with the reference standard in a study (see the 2 × 2 table). Find the negative likelihood ratio LR−. Round to two decimal places.

a = 223b = 392c = 67d = 728
LR− =
2.Evidence-based practice statisticsHard
CER20%EER?RRR 50%

Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 50% in relative terms (RRR = 50%). In a patient group the risk without treatment (CER) is 20% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.

RRR = 50%CER = 20%
NNT =
3.Descriptive statisticsMedium
202530354045

Find the sample standard deviation s of the data: 19, 22, 23, 36, 47, 30.

n = 6
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 8. What proportion P of values is below 84?

μ = 100σ = 8x = 84
P =
5.Confidence intervalsMedium
μ₁ − μ₂0L = ?Ux̄₁ − x̄₂E99%

The battery life of two phone models is compared. Model 1: 80 phones, mean 104.5 h, known standard deviation 10 h. Model 2: 100 phones, mean 107.5 h, known standard deviation 6 h. Find the lower limit of the 99% confidence interval for μ₁ − μ₂.

n₁ = 80x̄₁ = 104.5 hσ₁ = 10 hn₂ = 100x̄₂ = 107.5 hσ₂ = 6 h99%
lower limit = h
6.Confidence intervalsHard
μ₁ − μ₂, t(14) = 2.1450L = ?Ux̄₁ − x̄₂E95%

Two fertilisers are tested. Plot group 1: 5 plots, mean yield 53.5 kg, standard deviation 9.5 kg. Plot group 2: 11 plots, mean 63.5 kg, standard deviation 10 kg. Assume equal variances (pooled t, df = n₁ + n₂ − 2). Find the lower limit of the 95% confidence interval for μ₁ − μ₂.

n₁ = 5x̄₁ = 53.5s₁ = 9.5n₂ = 11x̄₂ = 63.5s₂ = 1095%t(14) = 2.145
lower limit = kg
7.Hypothesis tests & confidence intervalsMedium
2.42p = ?

The mean of a population is claimed to be 50; the population standard deviation is known to be 24. A random sample of 36 observations has a mean of 59.68. Test H₀: μ = 50 against H₁: μ > 50. Find the p-value p.

μ₀ = 50σ = 24n = 36x̄ = 59.68H₁: μ > μ₀
p =
8.Hypothesis tests & confidence intervalsHard
z −1.9601.96

A sample of 100 measurements has mean 498.4. The population standard deviation is 20. Find the upper limit U of the 95% confidence interval for the mean.

x̄ = 498.4σ = 20n = 10095%
U =

3Solutions

1.Evidence-based practice statistics

Answer: LR− = 0.36

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Sensitivity and specificity

Se = 223/290 = 0.769
Sp = 728/1120 = 0.65

Negative likelihood ratio

LR− = (1 − 0.769)/0.65 = 0.3554 ≈ 0.36

Answer

LR− = 0.36
2.Evidence-based practice statistics

Answer: NNT = 10

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Absolute risk reduction

ARR = 0.2·0.5 = 0.1

Number needed to treat

NNT = 1/0.1 = 10 → 10

Answer

NNT = 10

The same relative effect gives a smaller NNT when the baseline risk is higher.

3.Descriptive statistics

Answer: s = 10.56

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 177/6 = 29.5

Squared deviations

Σ(x − x̄)² = (−10.5)² + (−7.5)² + (−6.5)² + 6.5² + 17.5² + 0.5² = 557.5

Standard deviation

s = √(557.5/5) = 10.56

Answer

s = 10.56
4.Descriptive statistics

Answer: P = 0.02275

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −2

Standard normal table

Φ(−2) = 0.02275
P = 0.02275

Answer

P = 0.02275
5.Confidence intervals

Answer: lower limit = −6.269 h

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Point estimate

x̄₁ − x̄₂ = 104.5 − 107.5 = −3

Standard error

SE = √(10²/80 + 6²/100) = 1.269

Margin of error

E = 2.576·1.269 = 3.269

Interval

−3 ± 3.269 → [−6.269, 0.2686]

Answer

lower limit = −6.269 h

The interval contains 0, so the data do not show a significant difference.

6.Confidence intervals

Answer: lower limit = −21.41 kg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Pooled standard deviation

sp² = (4·9.5² + 10·10²)/14 = 97.21
sp = 9.86

Margin of error

E = 2.145·9.86·√(1/5 + 1/11) = 11.41

Interval

−10 ± 11.41 → [−21.41, 1.407]

Answer

lower limit = −21.41 kg
7.Hypothesis tests & confidence intervals

Answer: p = 0.00776

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Test statistic

SE = σ/√n = 24/√36 = 4
z = (59.68 − 50)/4 = 2.42

Tail area

Φ(2.42) = 0.9922
1 − Φ(2.42) = 0.0078

p-value

p = 0.00776

Answer

p = 0.00776

p ≤ 0.05, so H₀ is rejected at the 5% level.

8.Hypothesis tests & confidence intervals

Answer: U = 502.3

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Margin of error

E = 1.96·20/√100 = 3.92

Interval limit

U = 498.4 + 3.92 = 502.3

Answer

U = 502.3

ExamProblems · examproblems.com/courses/evidence-based-practice