Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
Se65%Sp62%LR− = ?

Practice exercise (made-up values, not clinical guidance). A test has a sensitivity of 65% and a specificity of 62%. Find the negative likelihood ratio LR−. Round to two decimal places.

Se = 65%Sp = 62%
LR− =
2.Evidence-based practice statisticsHard
p (%)PPV (%)5%PPV = ?100

Practice exercise (made-up values, not clinical guidance). A screening test has a sensitivity of 91% and a specificity of 84%. It is used in a population where the prevalence is 5%. Find the positive predictive value PPV as a percentage. Round to one decimal place.

Se = 91%Sp = 84%p = 5%
PPV = %
3.Descriptive statisticsMedium
202530354045

Find the sample standard deviation s of the data: 48, 30, 19, 34, 32, 34, 30.

n = 7
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 50 and standard deviation 8. What proportion P of values is above 34?

μ = 50σ = 8x = 34
P =
5.Confidence intervalsMedium
n = 11, sd​ = 5.90LU = ?d̄ = −9.3E95%

The blood pressure of 11 patients is measured before and after a treatment. The differences d = before − after (mmHg) have mean −9.3 and standard deviation 5.9. Find the upper limit of the 95% confidence interval for the mean difference.

n = 11d̄ = −9.3sd = 5.995%t(10) = 2.228
upper limit = mmHg
6.Confidence intervalsHard
n = 11Lσ = ?s = 8.595%

The diameters of 11 machined shafts have a sample standard deviation of 8.5 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 10, 2.5% of the χ² distribution lies below 3.247 and 2.5% lies above 20.483.

n = 11s = 8.5 µmχ² = 3.247, 20.483
σ = µm
7.Hypothesis tests & confidence intervalsMedium
−2.5712.571t = ?df = 5

6 employees take a typing test before and after a training course. For each person the difference d = after − before (words per minute) is recorded. The mean difference is 4.9 and the standard deviation of the differences is 4.8. Find the paired test statistic t for H₀: μd = 0.

n = 6d̄ = 4.9sd = 4.8
t =
8.Hypothesis tests & confidence intervalsHard
σ = 20, n = ?x̄ − Ex̄ + Ex̄E = 0.590%

How large must a sample be so that the 90% confidence interval for a mean has a margin of error of at most 0.5? The standard deviation is 20. Find the smallest sample size n.

σ = 20E = 0.590%
n =

3Solutions

1.Evidence-based practice statistics

Answer: LR− = 0.56

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Negative likelihood ratio

LR− = (1 − 0.65)/0.62 = 0.5645 ≈ 0.56

Answer

LR− = 0.56
2.Evidence-based practice statistics

Answer: PPV = 23 %

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

True and false positives (per person)

Se·p = 0.91·0.05 = 0.0455
(1 − Sp)·(1 − p) = 0.16·0.95 = 0.152

Positive predictive value

PPV = 0.0455/(0.0455 + 0.152) = 0.2304 ≈ 23%

Answer

PPV = 23%

The lower the prevalence, the lower the PPV of the same test.

3.Descriptive statistics

Answer: s = 8.561

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 227/7 = 32.43

Squared deviations

Σ(x − x̄)² = 15.57² + (−2.429)² + (−13.43)² + 1.571² + (−0.4286)² + 1.571² + (−2.429)² = 439.7

Standard deviation

s = √(439.7/6) = 8.561

Answer

s = 8.561
4.Descriptive statistics

Answer: P = 0.9772

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −2

Standard normal table

Φ(−2) = 0.02275
P = 1 − 0.02275 = 0.9772

Answer

P = 0.9772
5.Confidence intervals

Answer: upper limit = −5.337 mmHg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Critical value

df = 10, t = 2.228

Margin of error

E = 2.228·5.9/√11 = 3.963

Interval

−9.3 ± 3.963 → [−13.26, −5.337]

Answer

upper limit = −5.337 mmHg
6.Confidence intervals

Answer: σ = 14.92 µm

Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.

Sum of squares

(n − 1)s² = 10·8.5² = 722.5

Limits for σ²

722.5/20.483 = 35.27
722.5/3.247 = 222.5

Limit for σ

σ = √222.5 = 14.92 µm

Answer

σ = 14.92 µm

95% interval for σ: [5.939, 14.92] µm.

7.Hypothesis tests & confidence intervals

Answer: t = 2.501

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error of the mean difference

SE = 4.8/√6 = 1.96

Test statistic

t = 4.9/1.96 = 2.501

Answer

t = 2.501

With df = 5, the two-sided 5% critical value is 2.571; |t| is smaller, so H₀ is not rejected.

8.Hypothesis tests & confidence intervals

Answer: n = 4330

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Solve for n

n = (1.645·20/0.5)² = 4330

Round up

n = 4330

Answer

n = 4330

ExamProblems · examproblems.com/courses/evidence-based-practice