Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
eventno eventtotaltreatment42308350abcontrol62248310cd

Practice exercise (made-up values, not clinical guidance). In a randomised trial, 350 patients received a new treatment and 310 received the control treatment. The table shows how many in each group had the outcome (an unwanted event such as a stroke). Find the relative risk reduction RRR as a percentage. Round to one decimal place.

treatment: 42/350control: 62/310
RRR = %
2.Evidence-based practice statisticsHard
control11%treatment?

Practice exercise (made-up values, not clinical guidance). Without a drug, 11% of patients have a certain side effect during a year. The drug raises this risk with a relative risk of RR = 2.45. Find the number needed to harm NNH: how many patients must take the drug for a year for one extra patient to have the side effect? Round up to a whole number of patients.

control 11%RR = 2.45
NNH =
3.Descriptive statisticsMedium
15202530354045505560

Find the sample standard deviation s of the data: 19, 57, 39, 60, 13, 33.

n = 6
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 20. What proportion P of values is below 50?

μ = 70σ = 20x = 50
P =
5.Confidence intervalsMedium
x̄E₁ = 3.999%, n = 64x̄E₂ = ?95%, n = 64

A 99% confidence interval for a mean, based on 64 observations and a known σ, has a margin of error of 3.9. What is the margin of error E₂ of a 95% interval from the same data?

99%n₁ = 64E₁ = 3.995%
E₂ =
6.Confidence intervalsHard
σ = 9, n = ?x̄ − Ex̄ + Ex̄E = 190%

The population standard deviation is 9. How large a sample n do you need so that a 90% confidence interval for the mean has a margin of error of at most 1?

σ = 9E = 190%
n =
7.Hypothesis tests & confidence intervalsMedium
−1.961.96z = ?

Two production lines make the same part. Line 1: a sample of 60 parts has mean length 47 mm, and the line's known standard deviation is 17 mm. Line 2: a sample of 100 parts has mean 44.9 mm, known standard deviation 14 mm. Find the test statistic z for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (line 1 minus line 2).

n₁ = 60x̄₁ = 47 mmσ₁ = 17 mmn₂ = 100x̄₂ = 44.9 mmσ₂ = 14 mm
z =
8.Hypothesis tests & confidence intervalsHard
z −2.57602.576

A sample of 16 measurements has mean 54.2. The population standard deviation is 8. Find the lower limit L of the 99% confidence interval for the mean.

x̄ = 54.2σ = 8n = 1699%
L =

3Solutions

1.Evidence-based practice statistics

Answer: RRR = 40 %

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Event rates

EER = 42/350 = 0.12
CER = 62/310 = 0.2

Relative risk reduction

ARR = 0.2 − 0.12 = 0.08
RRR = 0.08/0.2 = 0.4 = 40%

Answer

RRR = 40%
2.Evidence-based practice statistics

Answer: NNH = 7

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Risk with the drug

0.11·2.45 = 0.2695

Absolute risk increase

ARI = 0.2695 − 0.11 = 0.1595

Number needed to harm

NNH = 1/0.1595 = 6.27 → 7

Answer

NNH = 7
3.Descriptive statistics

Answer: s = 19.23

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 221/6 = 36.83

Squared deviations

Σ(x − x̄)² = (−17.83)² + 20.17² + 2.167² + 23.17² + (−23.83)² + (−3.833)² = 1849

Standard deviation

s = √(1849/5) = 19.23

Answer

s = 19.23
4.Descriptive statistics

Answer: P = 0.1587

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1

Standard normal table

Φ(−1) = 0.1587
P = 0.1587

Answer

P = 0.1587
5.Confidence intervals

Answer: E₂ = 2.967

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Ratio of margins

E₂/E₁ = (1.96/2.576)·√(64/64) = 0.7609

New margin

E₂ = 3.9·0.7609 = 2.967

Answer

E₂ = 2.967
6.Confidence intervals

Answer: n = 220

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Solve for n

n = (1.645·9/1)² = 219.2

Round up

A sample size is a whole number, and rounding down would make the margin too large.

n = 220

Answer

n = 220
7.Hypothesis tests & confidence intervals

Answer: z = 0.8067

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Standard error of the difference

SE = √(17²/60 + 14²/100) = √6.777 = 2.603

Test statistic

z = (47 − 44.9)/2.603 = 0.8067

Answer

z = 0.8067

|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: L = 49.05

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Margin of error

E = 2.576·8/√16 = 5.152

Interval limit

L = 54.2 − 5.152 = 49.05

Answer

L = 49.05

ExamProblems · examproblems.com/courses/evidence-based-practice