Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
eventno eventtotaltreatment37233270abcontrol258502760cd

Practice exercise (made-up values, not clinical guidance). In a randomised trial, 270 patients received a new treatment and 760 received the control treatment. The table shows how many in each group had the outcome (an unwanted event such as a stroke). Find the relative risk reduction RRR as a percentage. Round to one decimal place.

treatment: 37/270control: 258/760
RRR = %
2.Evidence-based practice statisticsHard
pre-test50%post-test?p′LR+

Practice exercise (made-up values, not clinical guidance). A patient has a pre-test probability of 50% for a disease. A test with sensitivity 90% and specificity 69% comes back positive. Find the post-test probability p′ of the disease as a percentage. Round to one decimal place.

pre-test 50%Se = 90%Sp = 69%positive
p′ = %
3.Descriptive statisticsMedium
25303540455055

Find the sample standard deviation s of the data: 21, 34, 44, 45, 55, 43.

n = 6
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 12. What proportion P of values is above 58?

μ = 70σ = 12x = 58
P =
5.Confidence intervalsMedium
n = 8, s = 17LU = ?x̄ = 49.5E90%

A sample of 8 items has mean 49.5 and standard deviation s = 17. The population is roughly normal. Find the upper limit of the 90% confidence interval for the mean.

n = 8x̄ = 49.5s = 1790%t(7) = 1.895
upper limit =
6.Confidence intervalsHard
n = 25Lσ = ?s = 695%

The diameters of 25 machined shafts have a sample standard deviation of 6 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 24, 2.5% of the χ² distribution lies below 12.401 and 2.5% lies above 39.364.

n = 25s = 6 µmχ² = 12.401, 39.364
σ = µm
7.Hypothesis tests & confidence intervalsMedium
−1.961.96z = ?

Two production lines make the same part. Line 1: a sample of 50 parts has mean length 136 mm, and the line's known standard deviation is 20 mm. Line 2: a sample of 50 parts has mean 144.9 mm, known standard deviation 10 mm. Find the test statistic z for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (line 1 minus line 2).

n₁ = 50x̄₁ = 136 mmσ₁ = 20 mmn₂ = 50x̄₂ = 144.9 mmσ₂ = 10 mm
z =
8.Hypothesis tests & confidence intervalsHard
z −1.9601.96

A sample of 25 measurements has mean 508.8. The population standard deviation is 20. Find the lower limit L of the 95% confidence interval for the mean.

x̄ = 508.8σ = 20n = 2595%
L =

3Solutions

1.Evidence-based practice statistics

Answer: RRR = 59.6 %

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Event rates

EER = 37/270 = 0.137
CER = 258/760 = 0.3395

Relative risk reduction

ARR = 0.3395 − 0.137 = 0.2024
RRR = 0.2024/0.3395 = 0.5963 ≈ 59.6%

Answer

RRR = 59.6%
2.Evidence-based practice statistics

Answer: p′ = 74.4 %

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Likelihood ratio

LR+ = 0.9/(1 − 0.69) = 2.903

Pre-test odds

0.5/(1 − 0.5) = 1

Post-test odds

1·2.903 = 2.903

Post-test probability

p′ = 2.903/(1 + 2.903) = 0.7438 ≈ 74.4%

Answer

p′ = 74.4%
3.Descriptive statistics

Answer: s = 11.59

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 242/6 = 40.33

Squared deviations

Σ(x − x̄)² = (−19.33)² + (−6.333)² + 3.667² + 4.667² + 14.67² + 2.667² = 671.3

Standard deviation

s = √(671.3/5) = 11.59

Answer

s = 11.59
4.Descriptive statistics

Answer: P = 0.8413

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1

Standard normal table

Φ(−1) = 0.1587
P = 1 − 0.1587 = 0.8413

Answer

P = 0.8413
5.Confidence intervals

Answer: upper limit = 60.89

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Critical value

df = n − 1 = 7, t = 1.895

Margin of error

E = 1.895·17/√8 = 11.39

Interval

49.5 ± 11.39 → [38.11, 60.89]

Answer

upper limit = 60.89
6.Confidence intervals

Answer: σ = 8.347 µm

Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.

Sum of squares

(n − 1)s² = 24·6² = 864

Limits for σ²

864/39.364 = 21.95
864/12.401 = 69.67

Limit for σ

σ = √69.67 = 8.347 µm

Answer

σ = 8.347 µm

95% interval for σ: [4.685, 8.347] µm.

7.Hypothesis tests & confidence intervals

Answer: z = −2.814

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Standard error of the difference

SE = √(20²/50 + 10²/50) = √10 = 3.162

Test statistic

z = (136 − 144.9)/3.162 = −2.814

Answer

z = −2.814

|z| > 1.96, so H₀ is rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: L = 501

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Margin of error

E = 1.96·20/√25 = 7.84

Interval limit

L = 508.8 − 7.84 = 501

Answer

L = 501

ExamProblems · examproblems.com/courses/evidence-based-practice