In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Evidence-based practice statistics
Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time
Method
Draw the 2 × 2 table and label a, b, c and d before you calculate.
Read sensitivity and specificity down the columns, predictive values along the rows.
For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
For a likelihood ratio, convert the probability to odds, multiply, and convert back.
For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Confidence intervals
σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up
Method
Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
Find the critical value for the confidence level.
Margin of error: E = critical value × standard deviation/√n.
Interval: x̄ ± E.
Hypothesis tests & confidence intervals
z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n
Method
State H₀ and H₁ and decide whether the test is one- or two-sided.
Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
Compare with the critical value, or find the p-value.
Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.
2Practice problems
1.Evidence-based practice statisticsMedium
Practice exercise (made-up values, not clinical guidance). In a randomised trial, 600 patients received a new treatment and 290 received the control treatment. The table shows how many in each group had a side effect. Find the number needed to harm NNH: how many patients must be treated for one extra patient to have the side effect? Round up to a whole number of patients.
treatment: 72/600control: 17/290
NNH =
2.Evidence-based practice statisticsHard
Practice exercise (made-up values, not clinical guidance). A screening test has a sensitivity of 94% and a specificity of 84%. It is used in a population where the prevalence is 5%. Find the negative predictive value NPV as a percentage. Round to one decimal place.
Se = 94%Sp = 84%p = 5%
NPV = %
3.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 48, 16, 43, 60, 30, 14, 26.
n = 7
s =
4.Descriptive statisticsHard
A quantity is normally distributed with mean 60 and standard deviation 20. What proportion P of values is above 90?
μ = 60σ = 20x = 90
P =
5.Confidence intervalsMedium
The blood pressure of 20 patients is measured before and after a treatment. The differences d = before − after (mmHg) have mean 2.5 and standard deviation 6.2. Find the upper limit of the 95% confidence interval for the mean difference.
n = 20d̄ = 2.5sd = 6.295%t(19) = 2.093
upper limit = mmHg
6.Confidence intervalsHard
The population standard deviation is 29. How large a sample n do you need so that a 90% confidence interval for the mean has a margin of error of at most 1?
σ = 29E = 190%
n =
7.Hypothesis tests & confidence intervalsMedium
Two production lines make the same part. Line 1: a sample of 80 parts has mean length 123 mm, and the line's known standard deviation is 6 mm. Line 2: a sample of 60 parts has mean 121.6 mm, known standard deviation 13 mm. Find the test statistic z for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (line 1 minus line 2).
A one-sided z test of H₀: μ = 50 against H₁: μ < 50 is done at α = 0.10 with a sample of 25; the standard deviation is known to be 12.5. In reality the mean is 46.75. Find the probability of a Type II error β in percent.
μ₀ = 50μ = 46.75σ = 12.5n = 25α = 0.10
β = %
3Solutions
1.Evidence-based practice statistics
Answer: NNH = 17
Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.
Event rates
EER = 72/600 = 0.12
CER = 17/290 = 0.05862
Number needed to harm
ARI = 0.12 − 0.05862 = 0.06138
NNH = 1/0.06138 = 16.29 → 17
Answer
NNH = 17
About one in every 17 treated patients has the side effect because of the treatment.
2.Evidence-based practice statistics
Answer: NPV = 99.6 %
Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.
True and false negatives (per person)
Sp·(1 − p) = 0.84·0.95 = 0.798
(1 − Se)·p = 0.06·0.05 = 0.003
Negative predictive value
NPV = 0.798/(0.798 + 0.003) = 0.9963 ≈ 99.6%
Answer
NPV = 99.6%
3.Descriptive statistics
Answer: s = 17.11
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 1.5
Standard normal table
Φ(1.5) = 0.9332
P = 1 − 0.9332 = 0.06681
Answer
P = 0.06681
5.Confidence intervals
Answer: upper limit = 5.402 mmHg
Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.
Critical value
df = 19, t = 2.093
Margin of error
E = 2.093·6.2/√20 = 2.902
Interval
2.5 ± 2.902 → [−0.4017, 5.402]
Answer
upper limit = 5.402 mmHg
6.Confidence intervals
Answer: n = 2276
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Solve for n
n = (1.645·29/1)² = 2276
Round up
A sample size is a whole number, and rounding down would make the margin too large.
n = 2276
Answer
n = 2276
7.Hypothesis tests & confidence intervals
Answer: z = 0.7746
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
Standard error of the difference
SE = √(6²/80 + 13²/60) = √3.267 = 1.807
Test statistic
z = (123 − 121.6)/1.807 = 0.7746
Answer
z = 0.7746
|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).
8.Hypothesis tests & confidence intervals
Answer: β = 49.28 %
Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).