Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
casescontrolsexposed4325abnot exposed167155cd

Practice exercise (made-up values, not clinical guidance). A case-control study compares 210 patients with a disease (cases) and 180 people without it (controls). The table shows how many in each group were exposed to a risk factor. Find the odds ratio OR for the exposure. Round to two decimal places.

a = 43b = 25c = 167d = 155
OR =
2.Evidence-based practice statisticsHard
CER19%EER?RRR 38%

Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 38% in relative terms (RRR = 38%). In a patient group the risk without treatment (CER) is 19% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.

RRR = 38%CER = 19%
NNT =
3.Descriptive statisticsMedium
202530354045505560

Find the sample standard deviation s of the data: 23, 17, 60, 23, 42.

n = 5
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 50 and standard deviation 15. What proportion P of values is above 80?

μ = 50σ = 15x = 80
P =
5.Confidence intervalsMedium
μ₁ − μ₂0L = ?Ux̄₁ − x̄₂E99%

The battery life of two phone models is compared. Model 1: 40 phones, mean 120 h, known standard deviation 11 h. Model 2: 80 phones, mean 107.5 h, known standard deviation 13 h. Find the lower limit of the 99% confidence interval for μ₁ − μ₂.

n₁ = 40x̄₁ = 120 hσ₁ = 11 hn₂ = 80x̄₂ = 107.5 hσ₂ = 13 h99%
lower limit = h
6.Confidence intervalsHard
n = 30σ = ?Us = 2.895%

The diameters of 30 machined shafts have a sample standard deviation of 2.8 µm. Assuming the diameters are normally distributed, find the lower limit σ of the 95% confidence interval for the population standard deviation. With df = 29, 2.5% of the χ² distribution lies below 16.047 and 2.5% lies above 45.722.

n = 30s = 2.8 µmχ² = 16.047, 45.722
σ = µm
7.Hypothesis tests & confidence intervalsMedium
t −1.9901.99

A sample of 81 students has a mean score of 495.9 and a sample standard deviation of 12. Find the test statistic t for H₀: μ = 500.

μ₀ = 500x̄ = 495.9s = 12n = 81
t =
8.Hypothesis tests & confidence intervalsHard
−1.961.96z = ?

In a trial, 60 of 150 patients on treatment A recover, and 35 of 120 patients on treatment B. Using the pooled proportion, find the test statistic z for H₀: p₁ = p₂.

x₁ = 60n₁ = 150x₂ = 35n₂ = 120
z =

3Solutions

1.Evidence-based practice statistics

Answer: OR = 1.6

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Odds of exposure

cases: 43/167 = 0.2575
controls: 25/155 = 0.1613

Odds ratio

OR = (43·155)/(25·167) = 1.596 ≈ 1.6

Answer

OR = 1.6

OR above 1: exposure is more common among the cases.

2.Evidence-based practice statistics

Answer: NNT = 14

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Absolute risk reduction

ARR = 0.19·0.38 = 0.0722

Number needed to treat

NNT = 1/0.0722 = 13.85 → 14

Answer

NNT = 14

The same relative effect gives a smaller NNT when the baseline risk is higher.

3.Descriptive statistics

Answer: s = 17.79

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 165/5 = 33

Squared deviations

Σ(x − x̄)² = (−10)² + (−16)² + 27² + (−10)² + 9² = 1266

Standard deviation

s = √(1266/4) = 17.79

Answer

s = 17.79
4.Descriptive statistics

Answer: P = 0.02275

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 2

Standard normal table

Φ(2) = 0.9772
P = 1 − 0.9772 = 0.02275

Answer

P = 0.02275
5.Confidence intervals

Answer: lower limit = 6.661 h

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Point estimate

x̄₁ − x̄₂ = 120 − 107.5 = 12.5

Standard error

SE = √(11²/40 + 13²/80) = 2.267

Margin of error

E = 2.576·2.267 = 5.839

Interval

12.5 ± 5.839 → [6.661, 18.34]

Answer

lower limit = 6.661 h

The interval does not contain 0, so the means differ significantly.

6.Confidence intervals

Answer: σ = 2.23 µm

Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.

Sum of squares

(n − 1)s² = 29·2.8² = 227.4

Limits for σ²

227.4/45.722 = 4.973
227.4/16.047 = 14.17

Limit for σ

σ = √4.973 = 2.23 µm

Answer

σ = 2.23 µm

95% interval for σ: [2.23, 3.764] µm.

7.Hypothesis tests & confidence intervals

Answer: t = −3.075

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 12/√81 = 12/9 = 1.333

Test statistic

t = (495.9 − 500)/1.333 = −3.075

Answer

t = −3.075
t0.025; df = 80 = 1.99

|t| > 1.99, so H₀ is rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: z = 1.852

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Sample proportions

p̂₁ = 60/150 = 0.4
p̂₂ = 35/120 = 0.2917
p̂ = 95/270 = 0.3519

Standard error under H₀

SE = √(0.3519·0.6481·(1/150 + 1/120)) = 0.05849

Test statistic

z = (0.4 − 0.2917)/0.05849 = 1.852

Answer

z = 1.852

|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).

ExamProblems · examproblems.com/courses/evidence-based-practice