Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
casesperson-yearsexposed254200not exposed82700

Practice exercise (made-up values, not clinical guidance). In a cohort study, exposed people contributed 4200 person-years with 25 new cases, and unexposed people 2700 person-years with 8 new cases. Find the incidence rate ratio IRR (exposed versus unexposed). Round to two decimal places.

exposed: 25/4200 PYnot exposed: 8/2700 PY
IRR =
2.Evidence-based practice statisticsHard
pre-test25%post-test?p′LR+

Practice exercise (made-up values, not clinical guidance). A patient has a pre-test probability of 25% for a disease. A test with sensitivity 77% and specificity 83% comes back positive. Find the post-test probability p′ of the disease as a percentage. Round to one decimal place.

pre-test 25%Se = 77%Sp = 83%positive
p′ = %
3.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 15, 37, 20, 50, 55, 35.

n = 6
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 60 and standard deviation 20. What proportion P of values is below 40?

μ = 60σ = 20x = 40
P =
5.Confidence intervalsMedium
n = 8, s = 10.5L = ?Ux̄ = 56.5E90%

A sample of 8 items has mean 56.5 and standard deviation s = 10.5. The population is roughly normal. Find the lower limit of the 90% confidence interval for the mean.

n = 8x̄ = 56.5s = 10.590%t(7) = 1.895
lower limit =
6.Confidence intervalsHard
n = 21σ = ?Us = 8.695%

The diameters of 21 machined shafts have a sample standard deviation of 8.6 µm. Assuming the diameters are normally distributed, find the lower limit σ of the 95% confidence interval for the population standard deviation. With df = 20, 2.5% of the χ² distribution lies below 9.591 and 2.5% lies above 34.17.

n = 21s = 8.6 µmχ² = 9.591, 34.17
σ = µm
7.Hypothesis tests & confidence intervalsMedium
t −2.06402.064

A sample of 25 students has a mean score of 77.8 and a sample standard deviation of 20. Find the test statistic t for H₀: μ = 75.

μ₀ = 75x̄ = 77.8s = 20n = 25
t =
8.Hypothesis tests & confidence intervalsHard
H₀H₁μ₀x̄cμ₀ + 5α = 0.05βσ = 23, power 90%, n = ?

A one-sided z test at α = 0.05 must detect a shift of the mean of 5 units with a power of 90%. The standard deviation is 23. Find the minimum sample size n.

α = 0.05power = 90%δ = 5σ = 23zα = 1.645zβ = 1.282
n =

3Solutions

1.Evidence-based practice statistics

Answer: IRR = 2.01

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Incidence rates

exposed: 25/4200 = 5.952 per 1000 person-years
not exposed: 8/2700 = 2.963 per 1000 person-years

Rate ratio

IRR = 5.952/2.963 = 2.009 ≈ 2.01

Answer

IRR = 2.01
2.Evidence-based practice statistics

Answer: p′ = 60.2 %

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Likelihood ratio

LR+ = 0.77/(1 − 0.83) = 4.529

Pre-test odds

0.25/(1 − 0.25) = 0.3333

Post-test odds

0.3333·4.529 = 1.51

Post-test probability

p′ = 1.51/(1 + 1.51) = 0.6016 ≈ 60.2%

Answer

p′ = 60.2%
3.Descriptive statistics

Answer: s = 15.83

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 212/6 = 35.33

Squared deviations

Σ(x − x̄)² = (−20.33)² + 1.667² + (−15.33)² + 14.67² + 19.67² + (−0.3333)² = 1253

Standard deviation

s = √(1253/5) = 15.83

Answer

s = 15.83
4.Descriptive statistics

Answer: P = 0.1587

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1

Standard normal table

Φ(−1) = 0.1587
P = 0.1587

Answer

P = 0.1587
5.Confidence intervals

Answer: lower limit = 49.47

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Critical value

df = n − 1 = 7, t = 1.895

Margin of error

E = 1.895·10.5/√8 = 7.035

Interval

56.5 ± 7.035 → [49.47, 63.53]

Answer

lower limit = 49.47
6.Confidence intervals

Answer: σ = 6.579 µm

Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.

Sum of squares

(n − 1)s² = 20·8.6² = 1479

Limits for σ²

1479/34.17 = 43.29
1479/9.591 = 154.2

Limit for σ

σ = √43.29 = 6.579 µm

Answer

σ = 6.579 µm

95% interval for σ: [6.579, 12.42] µm.

7.Hypothesis tests & confidence intervals

Answer: t = 0.7

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 20/√25 = 20/5 = 4

Test statistic

t = (77.8 − 75)/4 = 0.7

Answer

t = 0.7
t0.025; df = 24 = 2.064

|t| < 2.064, so H₀ is not rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: n = 182

Sample size for a test: to detect a true shift δ with power 1 − β in a one-sided z test at level α, the standard error must satisfy δ = (z_α + z_β)·σ/√n, so n = ((z_α + z_β)·σ/δ)², rounded up.

Solve for n

n = ((1.645 + 1.282)·23/5)² = 181.3

Round up

n = 182

Answer

n = 182

ExamProblems · examproblems.com/courses/evidence-based-practice