Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
testdisease presentdisease absenttotalpositive312140452abnegative38380418cdtotal350520870

Practice exercise (made-up values, not clinical guidance). A new test was compared with the reference standard in a study (see the 2 × 2 table). Find the negative likelihood ratio LR−. Round to two decimal places.

a = 312b = 140c = 38d = 380
LR− =
2.Evidence-based practice statisticsHard
pre-test15%post-test?p′LR+

Practice exercise (made-up values, not clinical guidance). A patient has a pre-test probability of 15% for a disease. A test with sensitivity 76% and specificity 96% comes back positive. Find the post-test probability p′ of the disease as a percentage. Round to one decimal place.

pre-test 15%Se = 76%Sp = 96%positive
p′ = %
3.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 11, 13, 32, 57, 33, 40, 16.

n = 7
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 60 and standard deviation 10. What proportion P of values is above 66?

μ = 60σ = 10x = 66
P =
5.Confidence intervalsMedium
n = 10, s = 4LUx̄ = 115.5E = ?95%

A sample of 10 items has mean 115.5 and standard deviation s = 4. The population is roughly normal. Find the margin of error E of a 95% confidence interval for the mean.

n = 10x̄ = 115.5s = 495%t(9) = 2.262
E =
6.Confidence intervalsHard
μ₁ − μ₂, t(19) = 1.7290L = ?Ux̄₁ − x̄₂E90%

Two fertilisers are tested. Plot group 1: 9 plots, mean yield 14 kg, standard deviation 8.5 kg. Plot group 2: 12 plots, mean 19 kg, standard deviation 4.5 kg. Assume equal variances (pooled t, df = n₁ + n₂ − 2). Find the lower limit of the 90% confidence interval for μ₁ − μ₂.

n₁ = 9x̄₁ = 14s₁ = 8.5n₂ = 12x̄₂ = 19s₂ = 4.590%t(19) = 1.729
lower limit = kg
7.Hypothesis tests & confidence intervalsMedium
−1.961.96z = ?

Two production lines make the same part. Line 1: a sample of 60 parts has mean length 142.5 mm, and the line's known standard deviation is 7 mm. Line 2: a sample of 30 parts has mean 145.7 mm, known standard deviation 19 mm. Find the test statistic z for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (line 1 minus line 2).

n₁ = 60x̄₁ = 142.5 mmσ₁ = 7 mmn₂ = 30x̄₂ = 145.7 mmσ₂ = 19 mm
z =
8.Hypothesis tests & confidence intervalsHard
μ₀x̄c

A one-sided z test of H₀: μ = 200 against H₁: μ < 200 is done at α = 0.01 with a sample of 64; the standard deviation is known to be 12. In reality the mean is 196.4. Find the power 1 − β of the test in percent.

μ₀ = 200μ = 196.4σ = 12n = 64α = 0.01
1 − β = %

3Solutions

1.Evidence-based practice statistics

Answer: LR− = 0.15

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Sensitivity and specificity

Se = 312/350 = 0.8914
Sp = 380/520 = 0.7308

Negative likelihood ratio

LR− = (1 − 0.8914)/0.7308 = 0.1486 ≈ 0.15

Answer

LR− = 0.15
2.Evidence-based practice statistics

Answer: p′ = 77 %

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Likelihood ratio

LR+ = 0.76/(1 − 0.96) = 19

Pre-test odds

0.15/(1 − 0.15) = 0.1765

Post-test odds

0.1765·19 = 3.353

Post-test probability

p′ = 3.353/(1 + 3.353) = 0.7703 ≈ 77%

Answer

p′ = 77%
3.Descriptive statistics

Answer: s = 16.73

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 202/7 = 28.86

Squared deviations

Σ(x − x̄)² = (−17.86)² + (−15.86)² + 3.143² + 28.14² + 4.143² + 11.14² + (−12.86)² = 1679

Standard deviation

s = √(1679/6) = 16.73

Answer

s = 16.73
4.Descriptive statistics

Answer: P = 0.2743

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 0.6

Standard normal table

Φ(0.6) = 0.7257
P = 1 − 0.7257 = 0.2743

Answer

P = 0.2743
5.Confidence intervals

Answer: E = 2.861

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Critical value

df = n − 1 = 9, t = 2.262

Margin of error

E = 2.262·4/√10 = 2.861

Answer

E = 2.861
6.Confidence intervals

Answer: lower limit = −9.95 kg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Pooled standard deviation

sp² = (8·8.5² + 11·4.5²)/19 = 42.14
sp = 6.492

Margin of error

E = 1.729·6.492·√(1/9 + 1/12) = 4.95

Interval

−5 ± 4.95 → [−9.95, −0.05046]

Answer

lower limit = −9.95 kg
7.Hypothesis tests & confidence intervals

Answer: z = −0.8927

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Standard error of the difference

SE = √(7²/60 + 19²/30) = √12.85 = 3.585

Test statistic

z = (142.5 − 145.7)/3.585 = −0.8927

Answer

z = −0.8927

|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: 1 − β = 52.95 %

Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).

Critical sample mean

SE = 12/√64 = 1.5
x̄c = 200 − 2.326·1.5 = 196.5

z under the true mean

z = (196.5 − 196.4)/1.5 = 0.074

Power

power = P(Z < 0.074) = 52.95%
1 − β = 52.95%

Answer

1 − β = 52.95%

ExamProblems · examproblems.com/courses/evidence-based-practice