Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
Se97%Sp64%LR+ = ?

Practice exercise (made-up values, not clinical guidance). A test has a sensitivity of 97% and a specificity of 64%. Find the positive likelihood ratio LR+. Round to two decimal places.

Se = 97%Sp = 64%
LR+ =
2.Evidence-based practice statisticsHard
CER29%EER?RRR 16%

Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 16% in relative terms (RRR = 16%). In a patient group the risk without treatment (CER) is 29% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.

RRR = 16%CER = 29%
NNT =
3.Descriptive statisticsMedium
253035404550

Find the sample standard deviation s of the data: 51, 24, 51, 30, 37.

n = 5
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 10. What proportion P of values is below 92?

μ = 100σ = 10x = 92
P =
5.Confidence intervalsMedium
n = 16, sd​ = 2.60LU = ?d̄ = 10E95%

The blood pressure of 16 patients is measured before and after a treatment. The differences d = before − after (mmHg) have mean 10 and standard deviation 2.6. Find the upper limit of the 95% confidence interval for the mean difference.

n = 16d̄ = 10sd = 2.695%t(15) = 2.131
upper limit = mmHg
6.Confidence intervalsHard
p ≈ 0.3, n = ?p̂ − Ep̂ + Ep̂E = 0.0395%

A pilot study suggests that about 0.3 of products are defective. How many products n must be inspected so that a 95% confidence interval for the proportion has a margin of error of at most 0.03?

p ≈ 0.3E = 0.0395%
n =
7.Hypothesis tests & confidence intervalsMedium
t −1.98401.984

A sample of 100 students has a mean score of 120.8 and a sample standard deviation of 4. Find the test statistic t for H₀: μ = 120.

μ₀ = 120x̄ = 120.8s = 4n = 100
t =
8.Hypothesis tests & confidence intervalsHard
μ₀x̄c

A one-sided z test of H₀: μ = 500 against H₁: μ < 500 is done at α = 0.10 with a sample of 25; the standard deviation is known to be 2.5. In reality the mean is 499.2. Find the probability of a Type II error β in percent.

μ₀ = 500μ = 499.2σ = 2.5n = 25α = 0.10
β = %

3Solutions

1.Evidence-based practice statistics

Answer: LR+ = 2.69

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Positive likelihood ratio

LR+ = 0.97/(1 − 0.64) = 2.694 ≈ 2.69

Answer

LR+ = 2.69
2.Evidence-based practice statistics

Answer: NNT = 22

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Absolute risk reduction

ARR = 0.29·0.16 = 0.0464

Number needed to treat

NNT = 1/0.0464 = 21.55 → 22

Answer

NNT = 22

The same relative effect gives a smaller NNT when the baseline risk is higher.

3.Descriptive statistics

Answer: s = 12.22

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 193/5 = 38.6

Squared deviations

Σ(x − x̄)² = 12.4² + (−14.6)² + 12.4² + (−8.6)² + (−1.6)² = 597.2

Standard deviation

s = √(597.2/4) = 12.22

Answer

s = 12.22
4.Descriptive statistics

Answer: P = 0.2119

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −0.8

Standard normal table

Φ(−0.8) = 0.2119
P = 0.2119

Answer

P = 0.2119
5.Confidence intervals

Answer: upper limit = 11.39 mmHg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Critical value

df = 15, t = 2.131

Margin of error

E = 2.131·2.6/√16 = 1.385

Interval

10 ± 1.385 → [8.615, 11.39]

Answer

upper limit = 11.39 mmHg
6.Confidence intervals

Answer: n = 897

Confidence interval for a proportion: p̂ ± z·√(p̂(1 − p̂)/n), where p̂ = x/n. To reach a margin E you need n ≥ z²·p(1 − p)/E², rounded up; without a prior estimate use p = 0.5, which gives the largest n.

Solve for n

n = 1.96²·0.3·0.7/0.03² = 896.4

Round up

n = 897

Answer

n = 897
7.Hypothesis tests & confidence intervals

Answer: t = 2

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 4/√100 = 4/10 = 0.4

Test statistic

t = (120.8 − 120)/0.4 = 2

Answer

t = 2
t0.025; df = 99 = 1.984

|t| > 1.984, so H₀ is rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: β = 37.52 %

Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).

Critical sample mean

SE = 2.5/√25 = 0.5
x̄c = 500 − 1.282·0.5 = 499.4

z under the true mean

z = (499.4 − 499.2)/0.5 = 0.318

Type II error

power = P(Z < 0.318) = 62.48%
β = 100% − 62.48% = 37.52%

Answer

β = 37.52%

ExamProblems · examproblems.com/courses/evidence-based-practice