In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Evidence-based practice statistics
Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time
Method
Draw the 2 × 2 table and label a, b, c and d before you calculate.
Read sensitivity and specificity down the columns, predictive values along the rows.
For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
For a likelihood ratio, convert the probability to odds, multiply, and convert back.
For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Confidence intervals
σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up
Method
Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
Find the critical value for the confidence level.
Margin of error: E = critical value × standard deviation/√n.
Interval: x̄ ± E.
Hypothesis tests & confidence intervals
z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n
Method
State H₀ and H₁ and decide whether the test is one- or two-sided.
Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
Compare with the critical value, or find the p-value.
Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.
2Practice problems
1.Evidence-based practice statisticsMedium
Practice exercise (made-up values, not clinical guidance). A case-control study compares 140 patients with a disease (cases) and 310 people without it (controls). The table shows how many in each group were exposed to a risk factor. Find the odds ratio OR for the exposure. Round to two decimal places.
a = 17b = 81c = 123d = 229
OR =
2.Evidence-based practice statisticsHard
Practice exercise (made-up values, not clinical guidance). 10 000 people are screened with a test of sensitivity 84% and specificity 93%. The prevalence of the disease is 22%. How many positive results n₊ are expected in total?
N = 10 000p = 22%Se = 84%Sp = 93%
n₊ =
3.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 44, 20, 14, 22, 37, 51, 59.
n = 7
s =
4.Descriptive statisticsHard
A quantity is normally distributed with mean 70 and standard deviation 10. What proportion P of values is below 58?
μ = 70σ = 10x = 58
P =
5.Confidence intervalsMedium
A 99% confidence interval for a mean, based on 100 observations and a known σ, has a margin of error of 7.5. What is the margin of error E₂ of a 90% interval based on 25 observations?
99%n₁ = 100E₁ = 7.590%n₂ = 25
E₂ =
6.Confidence intervalsHard
The diameters of 25 machined shafts have a sample standard deviation of 3.6 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 24, 2.5% of the χ² distribution lies below 12.401 and 2.5% lies above 39.364.
n = 25s = 3.6 µmχ² = 12.401, 39.364
σ = µm
7.Hypothesis tests & confidence intervalsMedium
The mean of a population is claimed to be 80; the population standard deviation is known to be 24. A random sample of 64 observations has a mean of 86.24. Test H₀: μ = 80 against H₁: μ > 80. Find the p-value p.
μ₀ = 80σ = 24n = 64x̄ = 86.24H₁: μ > μ₀
p =
8.Hypothesis tests & confidence intervalsHard
A one-sided z test of H₀: μ = 200 against H₁: μ > 200 is done at α = 0.01 with a sample of 36; the standard deviation is known to be 12. In reality the mean is 207.2. Find the power 1 − β of the test in percent.
μ₀ = 200μ = 207.2σ = 12n = 36α = 0.01
1 − β = %
3Solutions
1.Evidence-based practice statistics
Answer: OR = 0.39
Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.
Odds of exposure
cases: 17/123 = 0.1382
controls: 81/229 = 0.3537
Odds ratio
OR = (17·229)/(81·123) = 0.3907 ≈ 0.39
Answer
OR = 0.39
OR below 1: exposure is less common among the cases, which suggests a protective effect.
2.Evidence-based practice statistics
Answer: n₊ = 2394
Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.
With and without the disease
10 000·0.22 = 2200
10 000 − 2200 = 7800
All positive results
TP = 2200·0.84 = 1848
FP = 7800·0.07 = 546
n₊ = 1848 + 546 = 2394
Answer
n₊ = 2394
Of the 2394 positives only 1848 have the disease (PPV 77.2%).
3.Descriptive statistics
Answer: s = 17.09
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = −1.2
Standard normal table
Φ(−1.2) = 0.1151
P = 0.1151
Answer
P = 0.1151
5.Confidence intervals
Answer: E₂ = 9.579
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Ratio of margins
E₂/E₁ = (1.645/2.576)·√(100/25) = 1.277
New margin
E₂ = 7.5·1.277 = 9.579
Answer
E₂ = 9.579
6.Confidence intervals
Answer: σ = 5.008 µm
Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.
Sum of squares
(n − 1)s² = 24·3.6² = 311
Limits for σ²
311/39.364 = 7.902
311/12.401 = 25.08
Limit for σ
σ = √25.08 = 5.008 µm
Answer
σ = 5.008 µm
95% interval for σ: [2.811, 5.008] µm.
7.Hypothesis tests & confidence intervals
Answer: p = 0.01876
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
Test statistic
SE = σ/√n = 24/√64 = 3
z = (86.24 − 80)/3 = 2.08
Tail area
Φ(2.08) = 0.9812
1 − Φ(2.08) = 0.0188
p-value
p = 0.01876
Answer
p = 0.01876
p ≤ 0.05, so H₀ is rejected at the 5% level.
8.Hypothesis tests & confidence intervals
Answer: 1 − β = 89.87 %
Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).