Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
eventno eventtotaltreatment28292320abcontrol21169190cd

Practice exercise (made-up values, not clinical guidance). In a randomised trial, 320 patients received a new treatment and 190 received the control treatment. The table shows how many in each group had the outcome (an unwanted event such as a stroke). Find the absolute risk reduction ARR as a percentage. Round to one decimal place.

treatment: 28/320control: 21/190
ARR = %
2.Evidence-based practice statisticsHard
CER7%EER?RRR 16%

Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 16% in relative terms (RRR = 16%). In a patient group the risk without treatment (CER) is 7% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.

RRR = 16%CER = 7%
NNT =
3.Descriptive statisticsMedium
3540455055

Find the sample standard deviation s of the data: 55, 50, 38, 31, 46, 41, 59.

n = 7
s =
4.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 50 and standard deviation 12. Find the z-score z of a score of 35.6.

μ = 50σ = 12x = 35.6
z =
5.Confidence intervalsMedium
n = 25, s = 11LU = ?x̄ = 102.5E95%

A sample of 25 items has mean 102.5 and standard deviation s = 11. The population is roughly normal. Find the upper limit of the 95% confidence interval for the mean.

n = 25x̄ = 102.5s = 1195%t(24) = 2.064
upper limit =
6.Confidence intervalsHard
n = 21Lσ = ?s = 0.695%

The diameters of 21 machined shafts have a sample standard deviation of 0.6 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 20, 2.5% of the χ² distribution lies below 9.591 and 2.5% lies above 34.17.

n = 21s = 0.6 µmχ² = 9.591, 34.17
σ = µm
7.Hypothesis tests & confidence intervalsMedium
t −1.9901.99

A sample of 81 students has a mean score of 121.1 and a sample standard deviation of 4. Find the test statistic t for H₀: μ = 120.

μ₀ = 120x̄ = 121.1s = 4n = 81
t =
8.Hypothesis tests & confidence intervalsHard
−1.961.96z = ?

In a trial, 195 of 300 patients on treatment A recover, and 79 of 100 patients on treatment B. Using the pooled proportion, find the test statistic z for H₀: p₁ = p₂.

x₁ = 195n₁ = 300x₂ = 79n₂ = 100
z =

3Solutions

1.Evidence-based practice statistics

Answer: ARR = 2.3 %

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Event rates

EER = 28/320 = 0.0875
CER = 21/190 = 0.1105

Absolute risk reduction

ARR = 0.1105 − 0.0875 = 0.02303 ≈ 2.3%

Answer

ARR = 2.3%
2.Evidence-based practice statistics

Answer: NNT = 90

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Absolute risk reduction

ARR = 0.07·0.16 = 0.0112

Number needed to treat

NNT = 1/0.0112 = 89.29 → 90

Answer

NNT = 90

The same relative effect gives a smaller NNT when the baseline risk is higher.

3.Descriptive statistics

Answer: s = 9.827

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 320/7 = 45.71

Squared deviations

Σ(x − x̄)² = 9.286² + 4.286² + (−7.714)² + (−14.71)² + 0.2857² + (−4.714)² + 13.29² = 579.4

Standard deviation

s = √(579.4/6) = 9.827

Answer

s = 9.827
4.Descriptive statistics

Answer: z = −1.2

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (35.6 − 50)/12 = −1.2

Answer

z = −1.2
5.Confidence intervals

Answer: upper limit = 107

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Critical value

df = n − 1 = 24, t = 2.064

Margin of error

E = 2.064·11/√25 = 4.541

Interval

102.5 ± 4.541 → [97.96, 107]

Answer

upper limit = 107
6.Confidence intervals

Answer: σ = 0.8664 µm

Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.

Sum of squares

(n − 1)s² = 20·0.6² = 7.2

Limits for σ²

7.2/34.17 = 0.2107
7.2/9.591 = 0.7507

Limit for σ

σ = √0.7507 = 0.8664 µm

Answer

σ = 0.8664 µm

95% interval for σ: [0.459, 0.8664] µm.

7.Hypothesis tests & confidence intervals

Answer: t = 2.475

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 4/√81 = 4/9 = 0.4444

Test statistic

t = (121.1 − 120)/0.4444 = 2.475

Answer

t = 2.475
t0.025; df = 80 = 1.99

|t| > 1.99, so H₀ is rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: z = −2.61

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Sample proportions

p̂₁ = 195/300 = 0.65
p̂₂ = 79/100 = 0.79
p̂ = 274/400 = 0.685

Standard error under H₀

SE = √(0.685·0.315·(1/300 + 1/100)) = 0.05364

Test statistic

z = (0.65 − 0.79)/0.05364 = −2.61

Answer

z = −2.61

|z| > 1.96, so H₀ is rejected at the 5% level (two-sided).

ExamProblems · examproblems.com/courses/evidence-based-practice