Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
testdisease presentdisease absenttotalpositive9967166abnegative5110531104cdtotal15011201270

Practice exercise (made-up values, not clinical guidance). A new test was compared with the reference standard in a study (see the 2 × 2 table). Find the positive likelihood ratio LR+. Round to two decimal places.

a = 99b = 67c = 51d = 1053
LR+ =
2.Evidence-based practice statisticsHard
control13%treatment?

Practice exercise (made-up values, not clinical guidance). Without a drug, 13% of patients have a certain side effect during a year. The drug raises this risk with a relative risk of RR = 2.42. Find the number needed to harm NNH: how many patients must take the drug for a year for one extra patient to have the side effect? Round up to a whole number of patients.

control 13%RR = 2.42
NNH =
3.Descriptive statisticsMedium
2025303540455055

Find the sample standard deviation s of the data: 48, 56, 19, 17, 22, 41, 38.

n = 7
s =
4.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 5. What proportion P of values is below 77.5?

μ = 70σ = 5x = 77.5
P =
5.Confidence intervalsMedium
n = 10, s = 3.5LU = ?x̄ = 54.5E90%

A sample of 10 items has mean 54.5 and standard deviation s = 3.5. The population is roughly normal. Find the upper limit of the 90% confidence interval for the mean.

n = 10x̄ = 54.5s = 3.590%t(9) = 1.833
upper limit =
6.Confidence intervalsHard
σ = 13, n = ?x̄ − Ex̄ + Ex̄E = 295%

The population standard deviation is 13. How large a sample n do you need so that a 95% confidence interval for the mean has a margin of error of at most 2?

σ = 13E = 295%
n =
7.Hypothesis tests & confidence intervalsMedium
t −2.06402.064

A sample of 25 students has a mean score of 190.7 and a sample standard deviation of 15. Find the test statistic t for H₀: μ = 200.

μ₀ = 200x̄ = 190.7s = 15n = 25
t =
8.Hypothesis tests & confidence intervalsHard
σ = 12, n = ?x̄ − Ex̄ + Ex̄E = 390%

How large must a sample be so that the 90% confidence interval for a mean has a margin of error of at most 3? The standard deviation is 12. Find the smallest sample size n.

σ = 12E = 390%
n =

3Solutions

1.Evidence-based practice statistics

Answer: LR+ = 11.03

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Sensitivity and specificity

Se = 99/150 = 0.66
Sp = 1053/1120 = 0.9402

Positive likelihood ratio

LR+ = 0.66/(1 − 0.9402) = 11.03

Answer

LR+ = 11.03
2.Evidence-based practice statistics

Answer: NNH = 6

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Risk with the drug

0.13·2.42 = 0.3146

Absolute risk increase

ARI = 0.3146 − 0.13 = 0.1846

Number needed to harm

NNH = 1/0.1846 = 5.417 → 6

Answer

NNH = 6
3.Descriptive statistics

Answer: s = 15.28

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 241/7 = 34.43

Squared deviations

Σ(x − x̄)² = 13.57² + 21.57² + (−15.43)² + (−17.43)² + (−12.43)² + 6.571² + 3.571² = 1402

Standard deviation

s = √(1402/6) = 15.28

Answer

s = 15.28
4.Descriptive statistics

Answer: P = 0.9332

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 1.5

Standard normal table

Φ(1.5) = 0.9332
P = 0.9332

Answer

P = 0.9332
5.Confidence intervals

Answer: upper limit = 56.53

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Critical value

df = n − 1 = 9, t = 1.833

Margin of error

E = 1.833·3.5/√10 = 2.029

Interval

54.5 ± 2.029 → [52.47, 56.53]

Answer

upper limit = 56.53
6.Confidence intervals

Answer: n = 163

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Solve for n

n = (1.96·13/2)² = 162.3

Round up

A sample size is a whole number, and rounding down would make the margin too large.

n = 163

Answer

n = 163
7.Hypothesis tests & confidence intervals

Answer: t = −3.1

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 15/√25 = 15/5 = 3

Test statistic

t = (190.7 − 200)/3 = −3.1

Answer

t = −3.1
t0.025; df = 24 = 2.064

|t| > 2.064, so H₀ is rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: n = 44

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Solve for n

n = (1.645·12/3)² = 43.3

Round up

n = 44

Answer

n = 44

ExamProblems · examproblems.com/courses/evidence-based-practice