Fluid Mechanics: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problems Back to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Hydrostatic force

Pressure at depth: p = ρgh
Force on a vertical wall: F = ρg·h_c·A
Centre of pressure: y_p = y_c + I_c/(y_cA)
Rectangle: I_c = bH³/12

Continuity & Bernoulli

Continuity: A₁v₁ = A₂v₂
Bernoulli: p₁ + ½ρv₁² + ρgz₁ = p₂ + ½ρv₂² + ρgz₂
Flow rate: Q = A·v
Circle area: A = πd²/4

Pipe friction & head loss

Reynolds number: Re = V·D/ν = ρ·V·D/μ
Flow regime: laminar below Re ≈ 2000, turbulent above Re ≈ 4000
Mean velocity: V = Q/A, A = π·D²/4
Darcy–Weisbach: h_f = f·(L/D)·V²/(2g)
Minor losses: h_m = ΣK·V²/(2g)
Typical K values: entrance 0.5, exit 1.0, 90° bend ≈ 0.3
Pressure drop: Δp = ρ·g·h_f
Two open reservoirs: Δz = (f·L/D + ΣK)·V²/(2g)
Free outlet: H = (1 + f·L/D + ΣK)·V²/(2g)

Pumps & pump power

Hydraulic power: P_h = ρ·g·Q·H = Q·Δp
Shaft power: P_shaft = P_h/η_pump
Electrical power: P_el = P_shaft/η_motor
Pump head: H = Δz + Δp/(ρ·g) + h_L
System losses: h_L = (f·L/D + ΣK)·V²/(2g)

2Practice problems

1.Hydrostatic forceMedium

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 4 mH = 2 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²

F = kN

2.Hydrostatic forceHard

A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 2 mH = 3 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²

F = kN

3.Continuity & BernoulliMedium

Water flows through a horizontal pipe that narrows from 100 mm to 40 mm. In the wide section the pressure is 400 kPa and the velocity is 1 m/s. Ignoring losses, find the pressure p₂ in the narrow section.

d₁ = 100 mmd₂ = 40 mmp₁ = 400 kPav₁ = 1 m/sρ = 1000 kg/m³

p₂ = kPa

4.Continuity & BernoulliHard

A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 50 mm and a gauge pressure of 60 kPa. The nozzle exit diameter is 25 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².

d₁ = 50 mmp₁ = 60 kPa (gauge)d₂ = 25 mmρ = 1000 kg/m³g = 9.81 m/s²

H = m

5.Pipe friction & head lossMedium

Water flows at a mean velocity of 2.4 m/s through a pipe 150 m long with an inside diameter of 50 mm. Use the Darcy friction factor f = 0.025 and g = 9.81 m/s². Find the friction head loss h_f.

V = 2.4 m/sL = 150 mD = 50 mmf = 0.025g = 9.81 m/s²

h_f = m

6.Pipe friction & head lossHard

A pipe 300 m long with an inside diameter of 300 mm (Darcy friction factor f = 0.025) runs from an open reservoir and discharges as a free jet into the air. The minor losses are a square-edged entrance (K = 0.5), 4 bends (K = 0.3 each) and a valve (K = 10). Use g = 9.81 m/s². How far H must the reservoir surface be above the pipe outlet for a flow rate of 120 L/s?

Q = 120 L/sL = 300 mD = 300 mmf = 0.025K_entrance = 0.5K_bend = 0.3 (×4)K_valve = 10

H = m

7.Pumps & pump powerMedium

A pump delivers 80 L/s of water (ρ = 1000 kg/m³) against a head of 30 m. The pump efficiency is 60% and the electric motor driving it has an efficiency of 95%. Use g = 9.81 m/s². Find the electrical power P_el the motor draws, in kW.

Q = 80 L/sH = 30 mη_pump = 60%η_motor = 95%g = 9.81 m/s²

P_el = kW

8.Pumps & pump powerHard

A pump moves 15 L/s of water (ρ = 1000 kg/m³) from an open lower reservoir to an upper tank whose water surface is 8 m higher. The pipe is 400 m long with an inside diameter of 100 mm and a Darcy friction factor f = 0.025; the minor-loss coefficients add up to ΣK = 8 (entrance and exit included). Use g = 9.81 m/s². The pump efficiency is 78%. Find the shaft power P_shaft in kW.

Q = 15 L/sΔz = 8 mL = 400 mD = 100 mmf = 0.025ΣK = 8η = 78%

P_shaft = kW

3Solutions

1.Hydrostatic force

Answer: F = 294.3 kN

Hydrostatic force on a plane surface: F = ρ·g·y_c·A. It acts at the centre of pressure, y_cp = y_c + I_c/(y_cA), which always lies below the centroid.

Centroid depth and area

y_c = d + H/2 = 4 + 2/2 = 5 m

A = H·b = 2·3 = 6 m²

Resultant force

F = ρ·g·y_c·A = 1000·9.81·5·6 = 294.3 kN

Answer

F = 294.3 kN

2.Hydrostatic force

Answer: F = 181.3 kN

Hydrostatic force on a plane surface: F = ρ·g·y_c·A. It acts at the centre of pressure, y_cp = y_c + I_c/(y_cA), which always lies below the centroid.

Centroid depth and area

y_c = d + H/2 = 2 + 3/2 = 3.5 m

A = H·b = 3·2 = 6 m²

Resultant force

F = ρ·g·y_c·A = 880·9.81·3.5·6 = 181.3 kN

Answer

F = 181.3 kN

3.Continuity & Bernoulli

Answer: p₂ = 381 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v₂ = v₁·(d₁/d₂)² = 1·(100/40)² = 6.25 m/s

½ρ(v₁² − v₂²) = ½·1000·(1² − 6.25²)/1000 = −19.03 kPa

p₂ = p₁ + ½ρ(v₁² − v₂²) = 400 + (−19.03) = 381 kPa

Answer

p₂ = 381 kPa

4.Continuity & Bernoulli

Answer: H = 6.524 m

Exit velocity

β = 25/50 = 0.5

v₂ = √(2p₁/(ρ(1 − β⁴))) = √(2·60000/(1000·0.9375)) = 11.31 m/s

Height of the jet

Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.

H = v₂²/(2g) = 11.31²/(2·9.81) = 6.524 m

Answer

H = 6.524 m

5.Pipe friction & head loss

Answer: h_f = 22.02 m

Pipe flow: the Reynolds number Re = V·D/ν = ρ·V·D/μ tells laminar flow (Re below about 2000) from turbulent flow (above about 4000). Friction along a pipe costs the Darcy–Weisbach head loss h_f = f·(L/D)·V²/(2g). Fittings, valves, the entrance and the exit add minor losses h_m = ΣK·V²/(2g). Between two open reservoir surfaces the energy equation gives Δz = h_f + h_m, with the exit loss K = 1 included.

Velocity head

V²/(2g) = 2.4²/(2·9.81) = 0.2936 m

Darcy–Weisbach

h_f = f·(L/D)·V²/(2g) = 0.025·(150/0.05)·2.4²/(2·9.81) = 22.02 m

Answer

h_f = 22.02 m

6.Pipe friction & head loss

Answer: H = 5.538 m

Velocity

V = Q/A = 0.12/0.07069 = 1.698 m/s

V²/(2g) = 0.1469 m

Loss coefficients

f·L/D = 0.025·300/0.3 = 25

ΣK = 0.5 + 4·0.3 + 10 = 11.7

Energy equation

The outlet jet still carries its velocity head; it is not a loss but it has to be supplied.

H = (1 + 25 + 11.7)·0.1469 = 5.538 m

Answer

H = 5.538 m

7.Pumps & pump power

Answer: P_el = 41.31 kW

Pump power: the power given to the water is the hydraulic power P_h = ρ·g·Q·H = Q·Δp. The shaft must deliver more because the pump loses some: P_shaft = P_h/η_pump, and the motor draws P_el = P_shaft/η_motor. The pump head H follows from the energy equation: static lift + pressure head + all friction and minor losses.

Hydraulic power

P_h = ρ·g·Q·H = 1000·9.81·0.08·30 = 23.54 kW

Shaft power

P_shaft = 23.54/0.6 = 39.24 kW

Electrical power

P_el = 39.24/0.95 = 41.31 kW

Answer

P_el = 41.31 kW

8.Pumps & pump power

Answer: P_shaft = 5.297 kW

Velocity

V = Q/A = 0.015/0.007854 = 1.91 m/s

V²/(2g) = 0.1859 m

Head losses

h_L = (f·L/D + ΣK)·V²/(2g) = (100 + 8)·0.1859 = 20.08 m

Pump head

H = Δz + h_L = 8 + 20.08 = 28.08 m

Shaft power

P_shaft = ρ·g·Q·H/η = 1000·9.81·0.015·28.08/0.78 = 5.297 kW

Answer

P_shaft = 5.297 kW

ExamProblems · examproblems.com/courses/fluid-mechanics