Formula sheets, the key method steps for every topic and 14 practice problems, with full solutions at the back.
20 g of Fe2O3 and 24 g of CO react according to Fe2O3 + 3CO → 2Fe + 3CO2. What mass m of Fe can form?
In the reaction C6H12O6 → 2C2H5OH + 2CO2, 24 g of C6H12O6 reacts completely (the other reactants are in excess) and 9.57 g of C2H5OH is collected. Find the percent yield Y.
You need 100 mL of 0.3 mol/L solution and have a 1.5 mol/L stock solution. What volume V1 of stock solution do you need?
100 mL of a 0.8 mol/L solution is mixed with 50 mL of a 1.2 mol/L solution of the same substance. Find the concentration c of the mixture (volumes are additive).
What volume V does 100 g of N₂ occupy at 450 kPa and 10 °C? Treat it as an ideal gas.
A fixed amount of N₂ goes from 250 kPa, 2 L, 30 °C to 400 kPa and 140 °C. Find the new volume V2.
A 250 g block of aluminium (c = 0.897 J/(g·°C)) at 170 °C is dropped into 250 g of water (c = 4.18 J/(g·°C)) at 23 °C in an insulated cup. Find the final temperature Tf.
Use the standard enthalpies of formation to find ΔH° for the reaction 2C4H10 + 13O₂ → 8CO₂ + 10H₂O(l).
0.4 mol/L of H₂ and 0.4 mol/L of I₂ are put in a container and react: H₂ + I₂ ⇌ 2HI, with Kc = 64. Find the equilibrium concentration [H2].
PCl₅ decomposes: PCl₅ ⇌ PCl₃ + Cl₂, with Kc = 0.01 at the reaction temperature. A container starts with 0.2 mol/L of PCl₅ only. Find the equilibrium concentration [Cl2].
Find the pH pH of a 0.5 mol/L solution of hydrofluoric acid (Ka = 0.00068).
A 1.00 L buffer contains 0.1 mol formic acid and 0.1 mol of its conjugate base (Ka = 0.00018). 0.025 mol of NaOH is added. Find the new pH pH.
A first-order reaction in a batch reactor has k = 0.2 min⁻¹. How long does it take to reach 80% conversion? Find t.
The rate constant of a reaction is 0.002 min⁻¹ at 20 °C and 0.0264 min⁻¹ at 45 °C. Find the activation energy Ea.
Answer: m = 13.99 g
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Y = 77.97 %
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: V1 = 20 mL
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: c = 0.9333 mol/L
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: V = 18.68 L
Ideal gas law: PV = nRT, with n = m/M.
Answer: V2 = 1.704 L
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Answer: Tf = 48.97 °C
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: ΔH° = −5755 kJ
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Negative: the reaction gives off heat (exothermic).
Answer: [H2] = 0.08 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: [Cl2] = 0.04 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: pH = 1.742
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
HA ⇌ H⁺ + A⁻: x mol/L of acid ionises.
Answer: pH = 3.967
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
Answer: t = 8.047 min
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
Answer: Ea = 80.03 kJ/mol
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
ExamProblems · examproblems.com/courses/general-chemistry