Formula sheets, the key method steps for every topic and 14 practice problems, with full solutions at the back.
4 g of H2 and 32 g of O2 react according to 2H2 + O2 → 2H2O. What mass m of H2O can form?
In the reaction 2H2 + O2 → 2H2O, 20 g of H2 reacts completely (the other reactants are in excess) and 162.7 g of H2O is collected. Find the percent yield Y.
You need 200 mL of 0.05 mol/L solution and have a 0.5 mol/L stock solution. How much water Vwater do you add to the stock solution?
100 mL of a 0.8 mol/L solution is mixed with 50 mL of a 1.2 mol/L solution of the same substance. Find the concentration c of the mixture (volumes are additive).
A tank of 10 L contains 50 g of CH₄ at 0 °C. Treat it as an ideal gas and find the pressure P.
Find the density ρ of He at 750 kPa and 10 °C, treating it as an ideal gas.
A 100 g block of zinc (c = 0.388 J/(g·°C)) at 110 °C is dropped into 100 g of water (c = 4.18 J/(g·°C)) at 25 °C in an insulated cup. Find the final temperature Tf.
Use the standard enthalpies of formation to find the heat q released when 50 g of C2H6 (M = 30.07 g/mol) burns completely: 2C2H6 + 7O₂ → 4CO₂ + 6H₂O(l). Give q as a positive number.
0.4 mol/L of H₂ and 0.4 mol/L of I₂ are put in a container and react: H₂ + I₂ ⇌ 2HI, with Kc = 4. Find the equilibrium concentration [H2].
PCl₅ decomposes: PCl₅ ⇌ PCl₃ + Cl₂, with Kc = 0.05 at the reaction temperature. A container starts with 0.8 mol/L of PCl₅ only. Find the equilibrium concentration [Cl2].
Find the pH pH of a 0.25 mol/L solution of hydrofluoric acid (Ka = 0.00068).
A buffer contains 0.4 mol/L hypochlorous acid and 0.05 mol/L of its sodium salt. Ka = 3 × 10⁻⁸. Find the pH pH of the buffer.
A second-order reaction (−rA = k·CA²) has k = 1 L/(mol·min) and an initial concentration of 1.5 mol/L. Find its first half-life t½.
A reaction has an activation energy of 90 kJ/mol. At 30 °C it is too slow. To what temperature T2 (in °C) must it be heated to make it 3 times faster?
Answer: m = 35.75 g
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Y = 91 %
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Vwater = 180 mL
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: c = 0.9333 mol/L
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: P = 707.9 kPa
Ideal gas law: PV = nRT, with n = m/M.
Answer: ρ = 1.275 kg/m³
Ideal gas density: ρ = PM/(RT).
Answer: Tf = 32.22 °C
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: q = 2593 kJ
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: [H2] = 0.2 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: [Cl2] = 0.1766 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: pH = 1.896
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
HA ⇌ H⁺ + A⁻: x mol/L of acid ionises.
Answer: pH = 6.62
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
Answer: t½ = 0.6667 min
Integrated rate laws: zero order: C = C₀ − kt (straight line, t½ = C₀/(2k)); first order: ln(C₀/C) = kt (t½ = ln 2/k); second order: 1/C − 1/C₀ = kt (t½ = 1/(kC₀)). Conversion X means C = C₀(1 − X).
Each later half-life is twice as long, because C₀ has halved.
Answer: T2 = 39.62 °C
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
ExamProblems · examproblems.com/courses/general-chemistry