Formula sheets, the key method steps for every topic and 14 practice problems, with full solutions at the back.
12 g of Na and 40 g of Cl2 react according to 2Na + Cl2 → 2NaCl. What mass m of NaCl can form?
In the reaction C3H8 + 5O2 → 3CO2 + 4H2O, 8 g of C3H8 reacts completely (the other reactants are in excess) and 12.29 g of H2O is collected. Find the percent yield Y.
You need 200 mL of 0.4 mol/L solution and have a 2 mol/L stock solution. What volume V1 of stock solution do you need?
100 mL of a 1 mol/L solution is mixed with 50 mL of a 1.2 mol/L solution of the same substance. Find the concentration c of the mixture (volumes are additive).
A tank of 5 L contains 180 g of N₂ at 55 °C. Treat it as an ideal gas and find the pressure P.
Find the density ρ of CO₂ at 800 kPa and 20 °C, treating it as an ideal gas.
A 50 g block of lead (c = 0.129 J/(g·°C)) at 90 °C is dropped into 300 g of water (c = 4.18 J/(g·°C)) at 18 °C in an insulated cup. Find the final temperature Tf.
Use the standard enthalpies of formation to find ΔH° for the reaction 2C2H6 + 7O₂ → 4CO₂ + 6H₂O(l).
0.25 mol/L of H₂ and 0.25 mol/L of I₂ are put in a container and react: H₂ + I₂ ⇌ 2HI, with Kc = 64. Find the equilibrium concentration [HI].
PCl₅ decomposes: PCl₅ ⇌ PCl₃ + Cl₂, with Kc = 0.2 at the reaction temperature. A container starts with 0.25 mol/L of PCl₅ only. Find the equilibrium concentration [PCl5].
Find the pH pH of a 0.01 mol/L solution of acetic acid (Ka = 1.8 × 10⁻⁵).
A 1.00 L buffer contains 0.1 mol benzoic acid and 0.2 mol of its conjugate base (Ka = 6.3 × 10⁻⁵). 0.05 mol of NaOH is added. Find the new pH pH.
In a first-order reaction the concentration of A falls from 1 mol/L to 0.5 mol/L in 20 min. Find the rate constant k.
A reaction has a rate constant of 0.01 min⁻¹ at 20 °C and an activation energy of 100 kJ/mol. Find the rate constant k2 at 50 °C.
Answer: m = 30.5 g
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Y = 93.99 %
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: V1 = 40 mL
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: c = 1.067 mol/L
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: P = 3506 kPa
Ideal gas law: PV = nRT, with n = m/M.
Answer: ρ = 14.45 kg/m³
Ideal gas density: ρ = PM/(RT).
Answer: Tf = 18.37 °C
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: ΔH° = −3119 kJ
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Negative: the reaction gives off heat (exothermic).
Answer: [HI] = 0.4 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: [PCl5] = 0.1051 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: pH = 3.382
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
HA ⇌ H⁺ + A⁻: x mol/L of acid ionises.
Answer: pH = 4.9
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
Answer: k = 0.03466 min⁻¹
Integrated rate laws: zero order: C = C₀ − kt (straight line, t½ = C₀/(2k)); first order: ln(C₀/C) = kt (t½ = ln 2/k); second order: 1/C − 1/C₀ = kt (t½ = 1/(kC₀)). Conversion X means C = C₀(1 − X).
Answer: k2 = 0.4511 min⁻¹
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
ExamProblems · examproblems.com/courses/general-chemistry