Formula sheets, the key method steps for every topic and 14 practice problems, with full solutions at the back.
4 g of C3H8 and 10 g of O2 react according to C3H8 + 5O2 → 3CO2 + 4H2O. What mass m of CO2 can form?
In the reaction 2Mg + O2 → 2MgO, 6 g of Mg reacts completely (the other reactants are in excess) and 5.47 g of MgO is collected. Find the percent yield Y.
You need 1000 mL of 0.4 mol/L solution and have a 1.5 mol/L stock solution. What volume V1 of stock solution do you need?
200 mL of a 1 mol/L solution is mixed with 500 mL of a 0.3 mol/L solution of the same substance. Find the concentration c of the mixture (volumes are additive).
What volume V does 220 g of CO₂ occupy at 750 kPa and 0 °C? Treat it as an ideal gas.
A fixed amount of CH₄ goes from 250 kPa, 5 L, 40 °C to 300 kPa and 250 °C. Find the new volume V2.
A 250 g block of iron (c = 0.449 J/(g·°C)) at 120 °C is dropped into 300 g of water (c = 4.18 J/(g·°C)) at 22 °C in an insulated cup. Find the final temperature Tf.
Use the standard enthalpies of formation to find ΔH° for the reaction C6H12O6 + 6O₂ → 6CO₂ + 6H₂O(l).
0.5 mol/L of H₂ and 0.5 mol/L of I₂ are put in a container and react: H₂ + I₂ ⇌ 2HI, with Kc = 64. Find the equilibrium concentration [HI].
PCl₅ decomposes: PCl₅ ⇌ PCl₃ + Cl₂, with Kc = 0.5 at the reaction temperature. A container starts with 1.5 mol/L of PCl₅ only. Find the equilibrium concentration [Cl2].
Find the pH pH of a 0.5 mol/L solution of benzoic acid (Ka = 6.3 × 10⁻⁵).
A 1.00 L buffer contains 0.3 mol lactic acid and 0.15 mol of its conjugate base (Ka = 0.00014). 0.01 mol of NaOH is added. Find the new pH pH.
A second-order reaction (−rA = k·CA²) in a batch reactor has k = 0.4 L/(mol·min) and starts at 2 mol/L. How long does it take to reach 60% conversion? Find t.
A reaction has a rate constant of 0.1 min⁻¹ at 20 °C and an activation energy of 60 kJ/mol. Find the rate constant k2 at 45 °C.
Answer: m = 8.252 g
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Y = 54.99 %
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: V1 = 266.7 mL
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: c = 0.5 mol/L
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: V = 15.14 L
Ideal gas law: PV = nRT, with n = m/M.
Answer: V2 = 6.961 L
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Answer: Tf = 30.05 °C
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: ΔH° = −2802 kJ
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Negative: the reaction gives off heat (exothermic).
Answer: [HI] = 0.8 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: [Cl2] = 0.6514 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: pH = 2.253
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
HA ⇌ H⁺ + A⁻: x mol/L of acid ionises.
Answer: pH = 3.596
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
Answer: t = 1.875 min
Integrated rate laws: zero order: C = C₀ − kt (straight line, t½ = C₀/(2k)); first order: ln(C₀/C) = kt (t½ = ln 2/k); second order: 1/C − 1/C₀ = kt (t½ = 1/(kC₀)). Conversion X means C = C₀(1 − X).
Answer: k2 = 0.692 min⁻¹
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
ExamProblems · examproblems.com/courses/general-chemistry