Formula sheets, the key method steps for every topic and 14 practice problems, with full solutions at the back.
24 g of Na and 24 g of Cl2 react according to 2Na + Cl2 → 2NaCl. What mass m of NaCl can form?
In the reaction 2Al + 3Cl2 → 2AlCl3, 16 g of Al reacts completely (the other reactants are in excess) and 43.49 g of AlCl3 is collected. Find the percent yield Y.
You need 500 mL of 0.3 mol/L solution and have a 0.5 mol/L stock solution. How much water Vwater do you add to the stock solution?
200 mL of a 0.2 mol/L solution is mixed with 400 mL of a 0.3 mol/L solution of the same substance. Find the concentration c of the mixture (volumes are additive).
A tank of 5 L contains 170 g of O₂ at 45 °C. Treat it as an ideal gas and find the pressure P.
A fixed amount of CO₂ goes from 150 kPa, 10 L, 20 °C to 600 kPa and 200 °C. Find the new volume V2.
A 150 g block of iron (c = 0.449 J/(g·°C)) at 80 °C is dropped into 150 g of water (c = 4.18 J/(g·°C)) at 17 °C in an insulated cup. Find the final temperature Tf.
Use the standard enthalpies of formation to find the heat q released when 25 g of CH4 (M = 16.04 g/mol) burns completely: CH4 + 2O₂ → CO₂ + 2H₂O(l). Give q as a positive number.
1 mol/L of H₂ and 1 mol/L of I₂ are put in a container and react: H₂ + I₂ ⇌ 2HI, with Kc = 49. Find the equilibrium concentration [H2].
PCl₅ decomposes: PCl₅ ⇌ PCl₃ + Cl₂, with Kc = 0.5 at the reaction temperature. A container starts with 1 mol/L of PCl₅ only. Find the equilibrium concentration [Cl2].
Find the pH pH of a 0.01 mol/L solution of formic acid (Ka = 0.00018).
A 1.00 L buffer contains 0.1 mol formic acid and 0.15 mol of its conjugate base (Ka = 0.00018). 0.02 mol of NaOH is added. Find the new pH pH.
A reaction with rate law −rA = k·CA² has k = 0.5 L/(mol·min) and starts at 0.5 mol/L. Find the concentration CA after 15 min.
A first-order reaction has a rate constant of 0.001 s⁻¹ at 50 °C and an activation energy of 50 kJ/mol. Find the pre-exponential factor A in the Arrhenius equation.
Answer: m = 39.56 g
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Y = 55 %
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Vwater = 200 mL
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: c = 0.2667 mol/L
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: P = 2810 kPa
Ideal gas law: PV = nRT, with n = m/M.
Answer: V2 = 4.035 L
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Answer: Tf = 23.11 °C
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: q = 1388 kJ
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: [H2] = 0.2222 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: [Cl2] = 0.5 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: pH = 2.901
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
HA ⇌ H⁺ + A⁻: x mol/L of acid ionises.
Answer: pH = 4.072
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
Answer: CA = 0.1053 mol/L
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
Answer: A = 120892 s⁻¹
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
ExamProblems · examproblems.com/courses/general-chemistry