Formula sheets, the key method steps for every topic and 14 practice problems, with full solutions at the back.
10 g of Fe2O3 and 10 g of CO react according to Fe2O3 + 3CO → 2Fe + 3CO2. What mass m of CO2 can form?
In the reaction C3H8 + 5O2 → 3CO2 + 4H2O, 6 g of C3H8 reacts completely (the other reactants are in excess) and 7.36 g of H2O is collected. Find the percent yield Y.
You need 200 mL of 0.25 mol/L solution and have a 3 mol/L stock solution. What volume V1 of stock solution do you need?
50 mL of a 0.8 mol/L solution is mixed with 400 mL of a 0.3 mol/L solution of the same substance. Find the concentration c of the mixture (volumes are additive).
A tank of 10 L contains 360 g of N₂ at 40 °C. Treat it as an ideal gas and find the pressure P.
Find the density ρ of He at 200 kPa and 10 °C, treating it as an ideal gas.
A 75 g block of lead (c = 0.129 J/(g·°C)) at 90 °C is dropped into 100 g of water (c = 4.18 J/(g·°C)) at 22 °C in an insulated cup. Find the final temperature Tf.
Use the standard enthalpies of formation to find the heat q released when 20 g of C3H8 (M = 44.1 g/mol) burns completely: C3H8 + 5O₂ → 3CO₂ + 4H₂O(l). Give q as a positive number.
1 mol/L of H₂ and 1 mol/L of I₂ are put in a container and react: H₂ + I₂ ⇌ 2HI, with Kc = 16. Find the equilibrium concentration [H2].
PCl₅ decomposes: PCl₅ ⇌ PCl₃ + Cl₂, with Kc = 0.5 at the reaction temperature. A container starts with 0.5 mol/L of PCl₅ only. Find the equilibrium concentration [PCl5].
Find the pH pH of a 0.25 mol/L solution of benzoic acid (Ka = 6.3 × 10⁻⁵).
A buffer contains 0.4 mol/L formic acid and 0.8 mol/L of its sodium salt. Ka = 0.00018. Find the pH pH of the buffer.
In a first-order reaction the concentration of A falls from 1.5 mol/L to 1.2 mol/L in 20 min. Find the rate constant k.
The rate constant of a reaction is 0.02 min⁻¹ at 20 °C and 0.464 min⁻¹ at 40 °C. Find the activation energy Ea.
Answer: m = 8.268 g
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: Y = 75.05 %
Stoichiometry: a balanced equation counts particles, not grams. Convert mass to moles with n = m/M, use the coefficients of the equation as the mole ratio, then convert back with m = n·M. With two reactants, the limiting reactant is the one that runs out first and fixes how much product forms.
Answer: V1 = 16.67 mL
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: c = 0.3556 mol/L
Molarity: concentration c = n/V in mol/L, with n = m/M. Diluting adds solvent but not solute, so the number of moles stays the same: c₁·V₁ = c₂·V₂. When two solutions of the same solute are mixed, the moles add up and so do the volumes.
Answer: P = 3346 kPa
Ideal gas law: PV = nRT, with n = m/M.
Answer: ρ = 0.3401 kg/m³
Ideal gas density: ρ = PM/(RT).
Answer: Tf = 23.54 °C
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: q = 1007 kJ
Heat and enthalpy: heating a substance takes q = m·c·ΔT. In a calorimeter the heat lost by the hot object equals the heat gained by the cold one. The enthalpy change of a reaction follows from enthalpies of formation: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Answer: [H2] = 0.3333 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: [PCl5] = 0.191 mol/L
Chemical equilibrium: for aA + bB ⇌ cC + dD, the equilibrium constant is Kc = [C]c[D]d/([A]a[B]b), using concentrations at equilibrium. An ICE table (Initial, Change, Equilibrium) links the starting amounts to the equilibrium amounts through one unknown x, scaled by the coefficients.
Answer: pH = 2.405
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
HA ⇌ H⁺ + A⁻: x mol/L of acid ionises.
Answer: pH = 4.046
pH: pH = −log₁₀[H₃O⁺] and pOH = −log₁₀[OH⁻], with pH + pOH = 14 at 25 °C. Strong acids and bases ionise completely. A weak acid only partly: Ka = x²/(c − x), where x = [H₃O⁺]. A buffer of a weak acid and its conjugate base follows Henderson–Hasselbalch: pH = pKa + log([A⁻]/[HA]).
Answer: k = 0.01116 min⁻¹
Integrated rate laws: zero order: C = C₀ − kt (straight line, t½ = C₀/(2k)); first order: ln(C₀/C) = kt (t½ = ln 2/k); second order: 1/C − 1/C₀ = kt (t½ = 1/(kC₀)). Conversion X means C = C₀(1 − X).
Answer: Ea = 120 kJ/mol
Reaction rates: for a first-order reaction −dC/dt = kC, so C = C₀·e−kt and the half-life ln 2/k does not depend on concentration. For a second-order reaction 1/C = 1/C₀ + kt. The rate constant rises with temperature following Arrhenius: k = A·e−Ea/(RT).
ExamProblems · examproblems.com/courses/general-chemistry