IV Fluids and Fluid Balance: cram pack

Formula sheets, the key method steps for every topic and 4 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

IV fluids & fluid balance

Holliday–Segar per hour
4 mL/kg (first 10 kg) + 2 mL/kg (next 10 kg) + 1 mL/kg (each kg above 20)
Holliday–Segar per day
100 / 50 / 20 mL/kg for the same bands
Fluid balance
intake − output
Ice chips
count as half their volume
Urine output
mL/kg/h = mL / (kg × h)
Infusion time
time (h) = volume left (mL) / rate (mL/h)
Volume infused
mL = rate × time

IV infusion rates

Pump rate
mL/h = volume (mL)/time (h)
Drip rate
drops/min = volume (mL) × drop factor / time (min)
Infusion time
time (h) = volume (mL)/rate (mL/h)

Method

  1. Pump rate in mL/h: volume divided by time in hours.
  2. Drip rate in drops/min: volume × drop factor divided by time in minutes.
  3. For time remaining: volume left divided by the rate.
  4. Round as the question or the equipment requires.

2Practice problems

1.IV fluids & fluid balanceMedium
IntakeOutput12-hour shiftjuice100 mLjelly120 mLsoup150 mLIV infusion100 mL/h × 12 hIV antibiotic2 × 100 mLurine450 mLurine225 mLwound drain60 mL

Practice exercise (made-up values, not clinical guidance). The record shows a patient's intake and output for one 12-hour shift. The IV infusion ran at the rate shown for the whole shift. Find the total intake I in mL.

juice: 100 mLjelly: 120 mLsoup: 150 mLIV infusion: 100 mL/h × 12 hIV antibiotic: 2 × 100 mL
I = mL
2.IV fluids & fluid balanceHard
500 mL100 mL infused60 mL/h21:00t = ? h

Practice exercise (made-up values, not clinical guidance). A 500 mL bag runs by pump at 60 mL/h. At 21:00, 100 mL have already been infused. How many hours t until the bag is empty? Round to one decimal place.

500 mL100 mL infused60 mL/h
t = h
3.IV infusion ratesMedium
1000 mL60 gtt/mL10 h? gtt/min

Infuse 1000 mL over 10 hours with a giving set of 60 gtt/mL. Find the drip rate R in drops per minute.

1000 mL10 h60 gtt/mL
R = gtt/min
4.IV infusion ratesHard
25 mg250 mL9 mL/h? mcg/min

An infusion of 25 mg in 250 mL runs at 9 mL/h. How many micrograms per minute D does the patient receive?

25 mg/250 mL9 mL/h
D = mcg/min

3Solutions

1.IV fluids & fluid balance

Answer: I = 1770 mL

Intake and output: intake counts everything that goes in (oral fluids, IV infusions, IV medications and flushes, tube feeds); ice chips count as half their volume. Output counts urine, drains, vomit and other losses. Balance = total intake − total output; a negative balance is a net loss. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Add the intake

oral: 100 + 120 + 150 = 370 mL
IV infusion: 100·12 = 1200 mL
IV antibiotic: 2·100 = 200 mL
I = 1770 mL

Answer

I = 1770 mL
2.IV fluids & fluid balance

Answer: t = 6.7 h

Infusion time: time (h) = volume to infuse (mL)/rate (mL/h); use the volume still left in the bag, not the bag size. Volume infused = rate × time. Convert decimal hours to hours and minutes with the fraction × 60 (0.5 h = 30 min, not 50 min). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Volume left

500 − 100 = 400 mL

Time

t = 400/60 = 6.667 ≈ 6.7 h

Answer

t = 6.7 h

That is about 6 h 40 min, so the bag runs out at about 03:40.

3.IV infusion rates

Answer: R = 100 gtt/min

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Time in minutes

10·60 = 600 min

Drip rate

R = 1000·60/600 = 100 gtt/min

Answer

R = 100 gtt/min
4.IV infusion rates

Answer: D = 15 mcg/min

Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).

Concentration

25000 mcg/250 mL = 100 mcg/mL

Dose per hour

9·100 = 900 mcg/h

Dose per minute

D = 900/60 = 15 mcg/min

Answer

D = 15 mcg/min

ExamProblems · examproblems.com/courses/iv-fluids-and-fluid-balance