IV Fluids and Fluid Balance: cram pack

Formula sheets, the key method steps for every topic and 4 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

IV fluids & fluid balance

Holliday–Segar per hour
4 mL/kg (first 10 kg) + 2 mL/kg (next 10 kg) + 1 mL/kg (each kg above 20)
Holliday–Segar per day
100 / 50 / 20 mL/kg for the same bands
Fluid balance
intake − output
Ice chips
count as half their volume
Urine output
mL/kg/h = mL / (kg × h)
Infusion time
time (h) = volume left (mL) / rate (mL/h)
Volume infused
mL = rate × time

IV infusion rates

Pump rate
mL/h = volume (mL)/time (h)
Drip rate
drops/min = volume (mL) × drop factor / time (min)
Infusion time
time (h) = volume (mL)/rate (mL/h)

Method

  1. Pump rate in mL/h: volume divided by time in hours.
  2. Drip rate in drops/min: volume × drop factor divided by time in minutes.
  3. For time remaining: volume left divided by the rate.
  4. Round as the question or the equipment requires.

2Practice problems

1.IV fluids & fluid balanceMedium
IntakeOutput12-hour shiftwater250 mLmilk240 mLjelly100 mLIV infusion125 mL/h × 12 hIV antibiotic2 × 50 mLurine175 mLurine225 mLurine300 mLwound drain140 mLvomit200 mL

Practice exercise (made-up values, not clinical guidance). The record shows a patient's intake and output for one 12-hour shift. The IV infusion ran at the rate shown for the whole shift. Find the total intake I in mL.

water: 250 mLmilk: 240 mLjelly: 100 mLIV infusion: 125 mL/h × 12 hIV antibiotic: 2 × 50 mL
I = mL
2.IV fluids & fluid balanceHard
500 mL200 mL infused125 mL/h06:30t = ? h

Practice exercise (made-up values, not clinical guidance). A 500 mL bag runs by pump at 125 mL/h. At 06:30, 200 mL have already been infused. How many hours t until the bag is empty? Round to one decimal place.

500 mL200 mL infused125 mL/h
t = h
3.IV infusion ratesMedium
V = ?20 gtt/mL25 gtt/min3 h

A drip runs at 25 gtt/min through a set of 20 gtt/mL. How many millilitres V does the patient receive in 3 hours?

25 gtt/min20 gtt/mL3 h
V = mL
4.IV infusion ratesHard
450 mL15 gtt/mL42 gtt/mint = ? h

A drip runs at 42 gtt/min through a set of 15 gtt/mL. There are 450 mL left in the bag. How many hours t until it is empty? Round to one decimal place.

42 gtt/min15 gtt/mL450 mL
t = h

3Solutions

1.IV fluids & fluid balance

Answer: I = 2190 mL

Intake and output: intake counts everything that goes in (oral fluids, IV infusions, IV medications and flushes, tube feeds); ice chips count as half their volume. Output counts urine, drains, vomit and other losses. Balance = total intake − total output; a negative balance is a net loss. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Add the intake

oral: 250 + 240 + 100 = 590 mL
IV infusion: 125·12 = 1500 mL
IV antibiotic: 2·50 = 100 mL
I = 2190 mL

Answer

I = 2190 mL
2.IV fluids & fluid balance

Answer: t = 2.4 h

Infusion time: time (h) = volume to infuse (mL)/rate (mL/h); use the volume still left in the bag, not the bag size. Volume infused = rate × time. Convert decimal hours to hours and minutes with the fraction × 60 (0.5 h = 30 min, not 50 min). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Volume left

500 − 200 = 300 mL

Time

t = 300/125 = 2.4 h

Answer

t = 2.4 h

That is about 2 h 24 min, so the bag runs out at about 08:54.

3.IV infusion rates

Answer: V = 225 mL

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Rate in mL/h

25·60/20 = 75 mL/h

Volume

V = 75·3 = 225 mL

Answer

V = 225 mL
4.IV infusion rates

Answer: t = 2.7 h

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Rate in mL/h

42·60/15 = 168 mL/h

Time left

t = 450/168 = 2.679 ≈ 2.7 h

Answer

t = 2.7 h

ExamProblems · examproblems.com/courses/iv-fluids-and-fluid-balance