IV Fluids and Fluid Balance: cram pack

Formula sheets, the key method steps for every topic and 4 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

IV fluids & fluid balance

Holliday–Segar per hour
4 mL/kg (first 10 kg) + 2 mL/kg (next 10 kg) + 1 mL/kg (each kg above 20)
Holliday–Segar per day
100 / 50 / 20 mL/kg for the same bands
Fluid balance
intake − output
Ice chips
count as half their volume
Urine output
mL/kg/h = mL / (kg × h)
Infusion time
time (h) = volume left (mL) / rate (mL/h)
Volume infused
mL = rate × time

IV infusion rates

Pump rate
mL/h = volume (mL)/time (h)
Drip rate
drops/min = volume (mL) × drop factor / time (min)
Infusion time
time (h) = volume (mL)/rate (mL/h)

Method

  1. Pump rate in mL/h: volume divided by time in hours.
  2. Drip rate in drops/min: volume × drop factor divided by time in minutes.
  3. For time remaining: volume left divided by the rate.
  4. Round as the question or the equipment requires.

2Practice problems

1.IV fluids & fluid balanceMedium
IntakeOutput8-hour shiftsoup200 mLjuice150 mLice chips240 mLIV infusion100 mL/h × 8 hIV antibiotic2 × 50 mLurine450 mLurine475 mLurine500 mLurine300 mLwound drain50 mL

Practice exercise (made-up values, not clinical guidance). The record shows a patient's intake and output for one 8-hour shift. The patient weighs 104 kg. Find the average urine output U in mL/kg/h. Round to two decimal places.

104 kg8 hurine: 450 mLurine: 475 mLurine: 500 mLurine: 300 mLwound drain: 50 mL
U = mL/kg/h
2.IV fluids & fluid balanceHard
500 mL80 mL/hstart 07:1509:15: ? mL

Practice exercise (made-up values, not clinical guidance). A 500 mL bag was started at 07:15 and runs by pump at 80 mL/h. How many mL V are left in the bag at 09:15?

500 mL80 mL/h07:15 → 09:15
V = mL
3.IV infusion ratesMedium
250 mL60 gtt/mL10 h? gtt/min

Infuse 250 mL over 10 hours with a giving set of 60 gtt/mL. Find the drip rate R in drops per minute.

250 mL10 h60 gtt/mL
R = gtt/min
4.IV infusion ratesHard
200 mL15 gtt/mL32 gtt/mint = ? h

A drip runs at 32 gtt/min through a set of 15 gtt/mL. There are 200 mL left in the bag. How many hours t until it is empty? Round to one decimal place.

32 gtt/min15 gtt/mL200 mL
t = h

3Solutions

1.IV fluids & fluid balance

Answer: U = 2.07 mL/kg/h

Intake and output: intake counts everything that goes in (oral fluids, IV infusions, IV medications and flushes, tube feeds); ice chips count as half their volume. Output counts urine, drains, vomit and other losses. Balance = total intake − total output; a negative balance is a net loss. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Total urine

450 + 475 + 500 + 300 = 1725 mL

Per kilogram per hour

U = 1725/(104·8) = 2.073 ≈ 2.07 mL/kg/h

Answer

U = 2.07 mL/kg/h
2.IV fluids & fluid balance

Answer: V = 340 mL

Infusion time: time (h) = volume to infuse (mL)/rate (mL/h); use the volume still left in the bag, not the bag size. Volume infused = rate × time. Convert decimal hours to hours and minutes with the fraction × 60 (0.5 h = 30 min, not 50 min). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Elapsed time

07:15 → 09:15 = 2 h

Volume infused

80·2 = 160 mL

Volume left

V = 500 − 160 = 340 mL

Answer

V = 340 mL
3.IV infusion rates

Answer: R = 25 gtt/min

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Time in minutes

10·60 = 600 min

Drip rate

R = 250·60/600 = 25 gtt/min

Answer

R = 25 gtt/min
4.IV infusion rates

Answer: t = 1.6 h

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Rate in mL/h

32·60/15 = 128 mL/h

Time left

t = 200/128 = 1.563 ≈ 1.6 h

Answer

t = 1.6 h

ExamProblems · examproblems.com/courses/iv-fluids-and-fluid-balance