Lab Values for Nurses: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Lab values & electrolytes

Method

  1. Compare the value with the laboratory’s own reference range, then with the patient’s baseline and trend.
  2. Check the sample: hemolysis, a delay, or blood drawn near an IV can give false results.
  3. Link the value to its typical signs and to the drugs and conditions that cause it.
  4. Look for interactions: low potassium or magnesium increases digoxin toxicity; dehydration raises lithium.
  5. Act on the patient: assess, hold a drug if the level is unsafe, read back critical values and inform the prescriber.

Arterial blood gas interpretation

Normal ranges
pH 7.35–7.45, PaCO₂ 35–45 mmHg (4.7–6.0 kPa), HCO₃⁻ 22–26 mmol/L
ROME
Respiratory: PaCO₂ opposite to pH; Metabolic: HCO₃⁻ equal to pH
Winter’s formula
PaCO₂ = 1.5·HCO₃⁻ + 8 ± 2
Metabolic alkalosis
PaCO₂ ≈ 0.7·HCO₃⁻ + 21
Anion gap
AG = Na⁺ − (Cl⁻ + HCO₃⁻) ≈ 8–12
Albumin-corrected gap
AG + 2.5·(4.0 − alb g/dL) = AG + 0.25·(40 − alb g/L)
Delta ratio
(AG − 12)/(24 − HCO₃⁻)
P/F ratio
PaO₂/FiO₂
Alveolar gas equation
PAO₂ = FiO₂·(760 − 47) − PaCO₂/0.8
Serum osmolality
2·Na⁺ + glucose + urea (2·Na⁺ + glucose/18 + BUN/2.8)

Method

  1. Read the pH: below 7.35 is acidosis, above 7.45 alkalosis.
  2. Find the value that explains it: PaCO₂ moving opposite to the pH is respiratory, HCO₃⁻ moving with the pH is metabolic.
  3. Look at the other value: normal means uncompensated, abnormal in the compensating direction means partial compensation, and a normal pH with both abnormal means full compensation.
  4. In a metabolic acidosis, compare PaCO₂ with Winter’s formula, 1.5·HCO₃⁻ + 8 ± 2, and calculate the anion gap Na⁺ − (Cl⁻ + HCO₃⁻).
  5. Check a high anion gap with the delta ratio and, when albumin is low, with the corrected gap.

Clinical pharmacokinetics

Rate constant and half-life
k = ln 2/t½ = 0.693/t½
First-order decay
C = C₀·e−kt = C₀·(1/2)t/t½
Two levels
k = ln(C₁/C₂)/Δt
Volume and clearance
Vd = dose/C₀, CL = k·Vd
Loading dose
LD = Vd·C/(S·F)
Maintenance rate
R = CL·Css/(S·F)
Average steady state
Css,avg = S·F·D/(CL·τ)
Steady state
1 − (1/2)ⁿ after n half-lives; ≈ 97% after 5
Infusion
C = (R/CL)(1 − e−kt)
Interval and dose from peak and trough
τ = ln(Cpeak/Ctrough)/k, D = Vd·(Cpeak − Ctrough)
Cockcroft–Gault
CrCl = (140 − age) × kg/(72 × SCr mg/dL), × 0.85 for women
Renal adjustment
dose × CrCl/normal; Dettli Q = 1 − fe·(1 − CrCl/normal)

Method

  1. Convert the half-life to a rate constant: k = 0.693/t½.
  2. Turn per-kg values into totals: Vd (L) = L/kg × weight, CL (L/h) = L/kg/h × weight.
  3. Pick the relation: C = C₀·e−kt, LD = Vd·C/(S·F), maintenance rate = CL·Css/(S·F), τ = ln(Cpeak/Ctrough)/k.
  4. For kidney function, estimate CrCl with Cockcroft–Gault first, then scale the dose or the interval.
  5. Check the result: levels fall by half every half-life, and steady state takes about five half-lives.

2Practice problems

1.Lab values & electrolytesMedium

A patient has a platelet count of 18 × 10³/µL. Which nursing measure is appropriate?

  1. ASoft toothbrush, electric razor and no intramuscular injections
  2. BGive the prescribed aspirin when the patient has a headache
  3. CTake temperatures rectally every four hours for accuracy
  4. DEncourage flossing twice daily and shaving with a sharp razor blade
2.Lab values & electrolytesHard

A patient with sepsis has the following new results. Which set best shows organ dysfunction?

  1. ACalcium 9.4 mg/dL, phosphate 3.5 mg/dL, magnesium 1.9 mEq/L
  2. BHemoglobin 12.5 g/dL, sodium 138 mEq/L, glucose 105 mg/dL
  3. CPlatelets 70 × 10³/µL, creatinine doubled, bilirubin raised
  4. DWBC 11.5 × 10³/µL, potassium 4.2 mEq/L, albumin 3.8 g/dL
3.Arterial blood gas interpretationMedium

Practice values: Na⁺ 130 mmol/L, glucose 6.5 mmol/L and urea 22 mmol/L. Calculate the serum osmolality Osm = 2·Na⁺ + glucose + urea to the nearest whole number.

Na⁺ 130 mmol/Lglucose 6.5 mmol/Lurea 22 mmol/L
Osm = mOsm/kg
4.Arterial blood gas interpretationHard

Practice values: Na⁺ 142, Cl⁻ 115, HCO₃⁻ 15 mmol/L and albumin 27 g/L. Find the albumin-corrected anion gap AGc = AG + 0.25·(40 − albumin).

Na⁺ 142 mmol/LCl⁻ 115 mmol/LHCO₃⁻ 15 mmol/Lalbumin 27 g/L
AGc = mmol/L
5.Clinical pharmacokineticsMedium
Vd = 0.7 L/kgC = 20 mg/LLD = ? mg63 kg · S = 0.92 · F = 1

Practice exercise (made-up values, not clinical guidance). A 63 kg patient is to be loaded intravenously with phenytoin sodium to reach a phenytoin level of 20 mg/L. The volume of distribution is 0.7 L/kg and the salt factor is S = 0.92. Find the loading dose LD of phenytoin sodium in mg.

63 kgVd = 0.7 L/kgC = 20 mg/LS = 0.92
LD = mg
6.Clinical pharmacokineticsHard
Vd = 0.3 L/kg0.5 → 6 mg/LD = ? mg66 kg

Practice exercise (made-up values, not clinical guidance). A 66 kg patient on regular tobramycin doses is at steady state. The target is a peak of 6 mg/L and a trough of 0.5 mg/L, and the volume of distribution is 0.3 L/kg. Assuming rapid IV doses, what dose D raises the level from the trough to the peak?

66 kgVd = 0.3 L/kgCpeak = 6 mg/LCtrough = 0.5 mg/L
D = mg
7.Clinical nursingMedium

Which is the correct technique for using a metered-dose inhaler without a spacer?

  1. APress the canister twice quickly, then breathe in fast and breathe straight out again
  2. BBreathe in quickly through the nose while pressing the canister
  3. CPress the canister and wait one minute before breathing in
  4. DBreathe out, then breathe in slowly and deeply while pressing the canister, then hold
8.Clinical nursingHard

Why must blood samples for a cross-match be labelled at the bedside immediately after they are taken?

  1. ATo prevent "wrong blood in tube" errors that can cause fatal reactions
  2. BTo keep the sample warm so the cells do not break down in transit
  3. CTo speed up the laboratory's computer system and reduce the waiting time
  4. DTo let the patient sign the label

3Solutions

1.Lab values & electrolytes

Answer: A · Soft toothbrush, electric razor and no intramuscular injections

Why this is the answer

Severe thrombocytopenia causes bleeding from minor trauma. Bleeding precautions include soft toothbrushes, electric razors, no IM injections or rectal procedures, and avoiding aspirin and NSAIDs.Checked against: Bleeding and Bruising (Thrombocytopenia) and Cancer Treatment · National Cancer Institute (NIH) (2022); Platelet Tests · MedlinePlus (NIH) (2024)

Answer

A · Soft toothbrush, electric razor and no intramuscular injections
2.Lab values & electrolytes

Answer: C · Platelets 70 × 10³/µL, creatinine doubled, bilirubin raised

Why this is the answer

In sepsis, falling platelets (coagulation), a rising creatinine (kidney) and a raised bilirubin (liver) show organ dysfunction, which indicates severe disease. The other sets are normal or near normal.Checked against: Bacterial Sepsis · StatPearls (NCBI Bookshelf) (2023); Laboratory Evaluation of Sepsis · StatPearls (NCBI Bookshelf) (2023)

Answer

C · Platelets 70 × 10³/µL, creatinine doubled, bilirubin raised
3.Arterial blood gas interpretation

Answer: Osm = 289 mOsm/kg

Derived values: calculated serum osmolality is 2·Na⁺ + glucose + urea with all values in mmol/L (2·Na⁺ + glucose/18 + BUN/2.8 with glucose and BUN in mg/dL); normal is about 275–295 mOsm/kg. The P/F ratio is PaO₂ divided by FiO₂ as a fraction. The alveolar oxygen pressure is PAO₂ = FiO₂·(760 − 47) − PaCO₂/0.8 mmHg at sea level, and the A–a gradient is PAO₂ − PaO₂.

Calculated osmolality

Osm = 2·130 + 6.5 + 22 = 288.5 ≈ 289 mOsm/kg

Answer

Osm = 289 mOsm/kg
4.Arterial blood gas interpretation

Answer: AGc = 15.25 mmol/L

Expected compensation: in metabolic acidosis Winter’s formula predicts PaCO₂ = 1.5·HCO₃⁻ + 8 ± 2 mmHg; a measured value above that range points to an additional respiratory acidosis, below it to an additional respiratory alkalosis. The anion gap AG = Na⁺ − (Cl⁻ + HCO₃⁻), normally about 8–12 mmol/L, separates high-gap from normal-gap metabolic acidosis; low albumin hides a high gap (add 2.5 per g/dL that albumin is below 4.0). The delta ratio (AG − 12)/(24 − HCO₃⁻) between about 0.8 and 2 fits a pure high-gap acidosis (some texts use 1 instead of 0.8), below that an added normal-gap acidosis, and above 2 an added metabolic alkalosis.

Anion gap

AG = 142 − (115 + 15) = 12

Correction for albumin

12 + 0.25·(40 − 27) = 15.25 mmol/L

Answer

AGc = 15.25 mmol/L

Above about 12 after correction: a high anion gap.

5.Clinical pharmacokinetics

Answer: LD = 958.7 mg

Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Volume of distribution

Vd = 0.7·63 = 44.1 L

Amount of active drug needed

Vd·C = 44.1·20 = 882 mg

Loading dose

LD = 882/(0.92·1) = 958.7 mg

Answer

LD = 958.7 mg

In practice the dose is rounded to a convenient amount.

6.Clinical pharmacokinetics

Answer: D = 108.9 mg

Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Volume of distribution

Vd = 0.3·66 = 19.8 L

Dose

D = 19.8·(6 − 0.5) = 108.9 mg

Answer

D = 108.9 mg

In practice the dose is rounded to a convenient amount.

7.Clinical nursing

Answer: D · Breathe out, then breathe in slowly and deeply while pressing the canister, then hold

Why this is the answer

The patient breathes out, seals the lips around the mouthpiece, starts breathing in slowly, presses the canister and continues a deep breath, then holds it for about 10 seconds. Spacers make coordination easier.

Answer

D · Breathe out, then breathe in slowly and deeply while pressing the canister, then hold
8.Clinical nursing

Answer: A · To prevent "wrong blood in tube" errors that can cause fatal reactions

Why this is the answer

A sample labelled with the wrong patient's details can lead to incompatible blood being issued. Labelling at the bedside after positive identification is a key transfusion safety step.

Answer

A · To prevent "wrong blood in tube" errors that can cause fatal reactions

ExamProblems · examproblems.com/courses/lab-values-for-nurses