Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 32N2​ = 40

A 7.5 kW motor running at 1500 rpm drives a pinion with 32 teeth, which meshes with a gear with 40 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 7.5 kWn1 = 1500 rpmN1 = 32N2 = 40η = 96%
T1 = N·m
2.Gears & gear trainsHard
A = 12B = 16C = 18D = 20

In a compound gear train, gear A (12 teeth) on the input shaft turning at 3000 rpm drives gear B (16 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (20 teeth) on the output shaft. Find the output speed nout.

nin = 3000 rpmA = 12B = 16C = 18D = 20
nout = rpm
3.Torsion of shaftsMedium
d = ?T = 750 N·mL = 0.8 m

A solid brass shaft 0.8 m long carries a torque of 750 N·m. The angle of twist between its ends must not exceed 1°. Find the smallest diameter d that meets this limit.

T = 750 N·mL = 0.8 mG = 39 GPaφallow = 1°
d = mm
4.Torsion of shaftsHard
Tdo​ = 40 mm, di​ = 24 mm

A hollow shaft transmits 10 kW at 1000 rpm. Find the maximum shear stress τmax in the shaft.

P = 10 kWN = 1000 rpmdo = 40 mmdi = 24 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 50σy​ = −30τxy​ = −40MPa

A point has σₓ = 50 MPa, σᵧ = −30 MPa and τₓᵧ = −40 MPa (tension positive). The element is rotated 50° counter-clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = 50 MPaσy = −30 MPaτxy = −40 MPaθ = 50°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​ = −60σy​ = 50τxy​ = −60MPa

A point in a loaded part has σₓ = −60 MPa, σᵧ = 50 MPa and τₓᵧ = −60 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 40° counter-clockwise from the x-axis.

σx = −60 MPaσy = 50 MPaτxy = −60 MPaθ = 40°
σθ = MPa
7.Axial stress & strainMedium
Ø 20 mmBrass1.5 mP = 20 kN

Find the axial strain ε in the brass bar, in microstrain (µε = 10⁻⁶).

P = 20 kNd = 20 mmL = 1.5 mE = 100 GPa
ε = µε
8.Axial stress & strainHard
Ø 30 mmAluminium2 mØ 20 mmCopper1.5 mP = 55 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 55 kNsegment 1: Ø30 mm, 2 m, aluminium (E = 70 GPa)segment 2: Ø20 mm, 1.5 m, copper (E = 117 GPa)
δ = mm
9.Column bucklingMedium
PL = 2.5 m20 × 40 mmcross-section

A column of length L made of steel is fixed at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 200 GPa (steel)b × h = 20 × 40 mm
Pcr = kN
10.Column bucklingHard
PL = 2 md = 40 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 2 mE = 200 GPa (steel)d = 40 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 100 kN/mc = 710 N·s/mm = 500 kg

A 500 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 710 N·s/m. Find the damping ratio ζ.

m = 500 kgk = 100 kN/mc = 710 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 60k2​ = 80k3​ = 50m = 40 kg

A 40 kg mass hangs from spring k₃ = 50 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 60 kN/mk2 = 80 kN/mk3 = 50 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 47.75 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 7500/157.1 = 47.75 N·m

Answer

T1 = 47.75 N·m
2.Gears & gear trains

Answer: nout = 2025 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 3000·12/16 = 2250 rpm = nC

Second stage

nout = 2250·18/20 = 2025 rpm

Answer

nout = 2025 rpm

total ratio = 1.481 : 1

3.Torsion of shafts

Answer: d = 54.74 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Required polar moment

T = 750 N·m = 750000 N·mm
L = 0.8 m = 800 mm
G = 39 GPa = 39000 MPa
φ = 1·π/180 = 0.01745 rad
J = TL/(Gφ) = 750000·800/(39000·0.01745) = 881474 mm⁴

Diameter

d = (32J/π)1/4 = 54.74 mm

Answer

d = 54.74 mm

In practice you would round up to the next standard size.

4.Torsion of shafts

Answer: τmax = 8.731 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1000/60 = 104.7 rad/s
T = P/ω = 10000/104.7 = 95.49 N·m

Polar second moment of area

J = π(40⁴ − 24⁴)/32 = 218755 mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 95493·20/218755 = 8.731 MPa

Answer

τmax = 8.731 MPa
5.Mohr’s circle & stress transformation

Answer: σy′ = 56.34 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = 10 − 40·(−0.1736) − (−40)·0.9848 = 56.34 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = −36.34 MPa, σx′ + σy′ = 20 = σx + σy

Answer

σy′ = 56.34 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = −73.64 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = −5 + −55·0.1736 + −60·0.9848 = −73.64 MPa

Answer

σθ = −73.64 MPa
7.Axial stress & strain

Answer: ε = 636.6 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·20²/4 = 314.2 mm²
σ = P/A = 20·1000/314.2 = 63.66 MPa

Strain (Hooke’s law)

E for brass = 100 GPa = 100000 MPa.

ε = σ/E = 63.66/100000 = 0.0006366 = 636.6 µε

Answer

ε = 636.6 µε
8.Axial stress & strain

Answer: δ = 4.468 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 77.81 MPa
σ2 = 175.1 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 77.81·2000/70000 = 2.223 mm
δ2 = σ2L2/E2 = 175.1·1500/117000 = 2.244 mm
δ = δ1 + δ2 = 4.468 mm

Answer

δ = 4.468 mm
9.Column buckling

Answer: Pcr = 33.69 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 40·20³/12 = 26667 mm⁴

Effective length

KL = 0.5·2500 = 1250 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·26667/1250² = 33688 N = 33.69 kN

Answer

Pcr = 33.69 kN
10.Column buckling

Answer: σcr = 12.34 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Radius of gyration and slenderness

A = 1257 mm²
r = √(I/A) = √(125664/1257) = 10 mm
KL = 2·2000 = 4000 mm
KL/r = 4000/10 = 400

Critical stress

σcr = π²E/(KL/r)² = π²·200000/400² = 12.34 MPa

Answer

σcr = 12.34 MPa
11.Mechanical vibrations

Answer: ζ = 0.0502

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(100000·500) = 14142 N·s/m

Damping ratio

ζ = c/cc = 710/14142 = 0.0502

Answer

ζ = 0.0502

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 4.83 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 80 = 140 kN/m
keq = 140·50/(140 + 50) = 36.84 kN/m

Natural frequency

ωn = √(36842/40) = 30.35 rad/s
fn = 30.35/(2π) = 4.83 Hz

Answer

fn = 4.83 Hz

ExamProblems · examproblems.com/courses/machine-design