Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 24N2​ = 60

A 1.5 kW motor running at 1440 rpm drives a pinion with 24 teeth, which meshes with a gear with 60 teeth. Ignore losses. Find the torque T1 on the motor shaft.

P = 1.5 kWn1 = 1440 rpmN1 = 24N2 = 60η = 100%
T1 = N·m
2.Gears & gear trainsHard
A = 12B = 48C = 30D = ?

In a compound gear train, gear A (12 teeth) on the input shaft turns at 1440 rpm and drives gear B (48 teeth). Gear C (30 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 225 rpm. How many teeth ND must gear D have?

nin = 1440 rpmA = 12B = 48C = 30nout = 225 rpm
ND =
3.Torsion of shaftsMedium
d = 12 mmT = 30 N·m200 mmφ = 2.11°

In a torsion test, a solid specimen of diameter 12 mm is twisted by a torque of 30 N·m. The two ends of a gauge length of 200 mm rotate 2.11° relative to each other (the material is still elastic). Find the shear modulus G of the material.

T = 30 N·md = 12 mmL = 200 mmφ = 2.11°
G = GPa
4.Torsion of shaftsHard
Tdo​ = 75 mm, di​ = 60 mm

A hollow shaft transmits 20 kW at 1000 rpm. Find the maximum shear stress τmax in the shaft.

P = 20 kWN = 1000 rpmdo = 75 mmdi = 60 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 110σy​ = 120τxy​ = −50MPa

A point in a loaded part has σₓ = 110 MPa, σᵧ = 120 MPa and τₓᵧ = −50 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 110 MPaσy = 120 MPaτxy = −50 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = 110σy​ = 10τxy​ = −60MPa

A point in a loaded part has σₓ = 110 MPa, σᵧ = 10 MPa and τₓᵧ = −60 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 20° clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 110 MPaσy = 10 MPaτxy = −60 MPaθ = -20°
τθ = MPa
7.Axial stress & strainMedium
P = ?12500 mm400 mmØ25Ø60δ = 0.3 mm

A bar is made of a steel segment (diameter 25 mm, length 500 mm, E = 200 GPa) joined end to end with a segment made of brass (diameter 60 mm, length 400 mm, E = 100 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.3 mm in total.

segment 1: steel, Ø25 mm, 500 mm, E = 200 GPasegment 2: brass, Ø60 mm, 400 mm, E = 100 GPaδ = 0.3 mm
P = kN
8.Axial stress & strainHard
Ø 25 mmAluminium2 mØ 12 mmAluminium1.5 mP = 15 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 15 kNsegment 1: Ø25 mm, 2 m, aluminium (E = 70 GPa)segment 2: Ø12 mm, 1.5 m, aluminium (E = 70 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 4 md = 50 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 70 GPa (aluminium)d = 50 mm
Pcr = kN
10.Column bucklingHard
P = 30 kNL = 5 md = ?cross-section

A solid round column of length L made of steel is pinned at both ends. It must carry 30 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 30 kNn = 2L = 5 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
tx15 mm5 cycles4.3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed 5 cycles later by a peak of 4.3 mm. Find the damping ratio ζ.

x0 = 15 mmx5 = 4.3 mmn = 5
ζ =
12.Mechanical vibrationsHard
k1​ = 15k2​ = 5k3​ = 50m = 25 kg

A 25 kg mass hangs from spring k₃ = 50 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 15 kN/mk2 = 5 kN/mk3 = 50 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 9.947 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 1500/150.8 = 9.947 N·m

Answer

T1 = 9.947 N·m
2.Gears & gear trains

Answer: ND = 48

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1440·12/48 = 360 rpm

Teeth on gear D

ND = C·nC/nout = 30·360/225 = 48

Answer

ND = 48
3.Torsion of shafts

Answer: G = 80.03 GPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar moment and angle

J = π·12⁴/32 = 2036 mm⁴
φ = 2.11·π/180 = 0.03683 rad

Shear modulus

T = 30 N·m = 30000 N·mm
G = TL/(Jφ) = 30000·200/(2036·0.03683) = 80033 MPa
G = 80.03 GPa

Answer

G = 80.03 GPa

Compare: steel ≈ 80 GPa, brass ≈ 39 GPa, aluminium ≈ 26 GPa.

4.Torsion of shafts

Answer: τmax = 3.905 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1000/60 = 104.7 rad/s
T = P/ω = 20000/104.7 = 191 N·m

Polar second moment of area

J = π(75⁴ − 60⁴)/32 = 1.834 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 190986·37.5/1.834 × 10⁶ = 3.905 MPa

Answer

τmax = 3.905 MPa
5.Mohr’s circle & stress transformation

Answer: θp = −47.86 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−50, 110 − 120) = −95.71°

Angle on the element

θp = −47.86°

Answer

θp = −47.86°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: τθ = −13.82 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −50·−0.6428 + −60·0.766 = −13.82 MPa

Answer

τθ = −13.82 MPa
7.Axial stress & strain

Answer: P = 46.1 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 490.9 mm², A₂ = 2827 mm²

Flexibilities

L₁/(E₁A₁) = 500/(200000·490.9) = 5.093 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 400/(100000·2827) = 1.415 × 10⁻⁶ mm/N

Load

P = 0.3/6.508 × 10⁻⁶ = 46099 N = 46.1 kN

Answer

P = 46.1 kN
8.Axial stress & strain

Answer: σmax = 132.6 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 30.56 MPa
σ2 = 132.6 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 132.6 MPa

Answer

σmax = 132.6 MPa
9.Column buckling

Answer: Pcr = 13.25 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Effective length

KL = 1·4000 = 4000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·306796/4000² = 13247 N = 13.25 kN

Answer

Pcr = 13.25 kN
10.Column buckling

Answer: d = 62.73 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·30000 = 60000 N
KL = 1·5000 = 5000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·60000·5000²/(π³·200000))^(1/4) = 62.73 mm

Answer

d = 62.73 mm

Check: the slenderness KL/r is 318.8, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.03974

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(15/4.3) = 0.2499

Damping ratio

ζ = δ/√(4π² + δ²) = 0.2499/√(39.48 + 0.06244) = 0.03974

Answer

ζ = 0.03974
12.Mechanical vibrations

Answer: fn = 3.805 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 5 = 20 kN/m
keq = 20·50/(20 + 50) = 14.29 kN/m

Natural frequency

ωn = √(14286/25) = 23.9 rad/s
fn = 23.9/(2π) = 3.805 Hz

Answer

fn = 3.805 Hz

ExamProblems · examproblems.com/courses/machine-design