Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
Tw​ = ?z = 3, 2900 rpm

A 0.75 kW motor at 2900 rpm drives a worm with 3 start(s). The worm wheel has 48 teeth and the drive has an efficiency of 60%. Find the output torque Tw on the wheel shaft.

z = 3Nw = 48n = 2900 rpmP = 0.75 kWη = 60%
Tw = N·m
2.Gears & gear trainsHard
d1​ = 150 mmd2​ = 400 mm1500 rpmC = 500 mmT1​ = 1000 NT2​P = ?

An open belt connects a 150 mm driving pulley at 1500 rpm to a 400 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 1500 rpmd2 = 400 mmC = 500 mmμ = 0.25T1 = 1000 N
P = kW
3.Torsion of shaftsMedium
T = 400 N·md = 30 mmL = 1.2 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 400 N·md = 30 mmL = 1.2 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
do​ = ?75 kW, 1800 rpm

A hollow shaft must transmit 75 kW at 1800 rpm. Its inner diameter is to be 0.8 times its outer diameter, and the shear stress must not exceed 50 MPa. Find the smallest outer diameter do.

P = 75 kWN = 1800 rpmdi/do = 0.8τallow = 50 MPa
do = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 150σy​ = −40τxy​ = 30MPa

A point in a loaded part has σₓ = 150 MPa, σᵧ = −40 MPa and τₓᵧ = 30 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 150 MPaσy = −40 MPaτxy = 30 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​surface of the shaft

A solid shaft of diameter 60 mm carries an axial tensile force of 30 kN together with a torque of 500 N·m. At the surface of the shaft, find the maximum in-plane shear stress τmax.

d = 60 mmF = 30 kNT = 500 N·m
τmax = MPa
7.Axial stress & strainMedium
P = ?12500 mm500 mmØ20Ø40δ = 0.2 mm

A bar is made of a steel segment (diameter 20 mm, length 500 mm, E = 200 GPa) joined end to end with a segment made of bronze (diameter 40 mm, length 500 mm, E = 110 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.2 mm in total.

segment 1: steel, Ø20 mm, 500 mm, E = 200 GPasegment 2: bronze, Ø40 mm, 500 mm, E = 110 GPaδ = 0.2 mm
P = kN
8.Axial stress & strainHard
100 kN12300 mm300 mmØ40Ø50σ2​ = ?

A steel segment (diameter 40 mm, length 300 mm, E = 200 GPa) and a segment made of aluminium (diameter 50 mm, length 300 mm, E = 70 GPa) are joined end to end and fixed between two rigid walls. An axial load of 100 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø40 mm, 300 mm, E = 200 GPasegment 2: aluminium, Ø50 mm, 300 mm, E = 70 GPaP = 100 kN
σ2 = MPa
9.Column bucklingMedium
PL = 1 md = 25 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 1 mE = 200 GPa (steel)d = 25 mm
Pcr = kN
10.Column bucklingHard
PL = 3 md = 60 mmcross-section

A column of length L made of aluminium is pinned at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 3 mE = 70 GPa (aluminium)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
tx10 mm4 cycles2.2 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed 4 cycles later by a peak of 2.2 mm. Find the damping ratio ζ.

x0 = 10 mmx4 = 2.2 mmn = 4
ζ =
12.Mechanical vibrationsHard
k1​ = 30k2​ = 5m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 5 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 30 kN/mk2 = 5 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: Tw = 23.71 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 2900·3/48 = 181.3 rpm

Output torque

ωw = 2π·181.3/60 = 18.98 rad/s
Tw = η·P/ωw = 0.6·750/18.98 = 23.71 N·m

Answer

Tw = 23.71 N·m
2.Gears & gear trains

Answer: P = 5.686 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.636 rad

Slack-side tension

eμθ = e0.6591 = 1.933, T₂ = 1000/1.933 = 517.3 N

Power

P = (1000 − 517.3)·11.78 = 5.686 kW

Answer

P = 5.686 kW
3.Torsion of shafts

Answer: φ = 4.323 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·30⁴/32 = 79522 mm⁴

Angle of twist

φ = TL/(GJ) = 400·1000·1200/(80000·79522) = 0.07545 rad
φ = 0.07545·180/π = 4.323°

Answer

φ = 4.323°
4.Torsion of shafts

Answer: do = 40.95 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1800/60 = 188.5 rad/s
T = P/ω = 75000/188.5 = 397.9 N·m

Outer diameter from the allowable stress

T = 397.9 N·m = 397887 N·mm
1 − k⁴ = 1 − 0.8⁴ = 0.5904
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·397887/(π·50·0.5904)) = 40.95 mm
di = 0.8·40.95 = 32.76 mm

Answer

do = 40.95 mm

A solid shaft would need d = 34.35 mm; the hollow one is a little larger but much lighter.

5.Mohr’s circle & stress transformation

Answer: τmax = 99.62 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((150 − −40)/2)² + 30²) = 99.62 MPa

Answer

τmax = 99.62 MPa
6.Mohr’s circle & stress transformation

Answer: τmax = 12.93 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = F/A = 30000/(π·60²/4) = 30000/2827 = 10.61 MPa
τ = 16T/(πd³) = 16·500000/(π·60³) = 11.79 MPa
στxyCτmax​

Mohr’s circle

C = σ/2 = 5.305 MPa
R = √(5.305² + 11.79²) = 12.93 MPa

Answer

τmax = 12.93 MPa
7.Axial stress & strain

Answer: P = 17.28 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 314.2 mm², A₂ = 1257 mm²

Flexibilities

L₁/(E₁A₁) = 500/(200000·314.2) = 7.958 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 500/(110000·1257) = 3.617 × 10⁻⁶ mm/N

Load

P = 0.2/1.157 × 10⁻⁵ = 17279 N = 17.28 kN

Answer

P = 17.28 kN
8.Axial stress & strain

Answer: σ2 = 18.01 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·1257/300 = 837758 N/mm
k₂ = 70000·1963/300 = 458149 N/mm

Share of segment 2

F2 = 100000·458149/1.296 × 10⁶ = 35354 N

Stress

σ2 = 35354/1963 = 18.01 MPa (compression)

Answer

σ2 = 18.01 MPa
9.Column buckling

Answer: Pcr = 9.462 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·25⁴/64 = 19175 mm⁴

Effective length

KL = 2·1000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·19175/2000² = 9462 N = 9.462 kN

Answer

Pcr = 9.462 kN
10.Column buckling

Answer: σcr = 17.27 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 1·3000 = 3000 mm
KL/r = 3000/15 = 200

Critical stress

σcr = π²E/(KL/r)² = π²·70000/200² = 17.27 MPa

Answer

σcr = 17.27 MPa
11.Mechanical vibrations

Answer: ζ = 0.06014

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(10/2.2) = 0.3785

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3785/√(39.48 + 0.1433) = 0.06014

Answer

ζ = 0.06014
12.Mechanical vibrations

Answer: keq = 35 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 5 = 35 kN/m

Answer

keq = 35 kN/m

ExamProblems · examproblems.com/courses/machine-design